Leotec LESW18 User manual

LESW18 USER MANUAL
Thank you for choosing our product!
To have a comprehensive understanding and using this device, to know all the features
and simple operation method, please read this manual first.
The functions on the user manual may be little different with physical, please make
the final products as the standard.
The typing errors in this manual and discrepancies will be timely updated with the
latest products. If we have updates, this manual will be subject to change without
notice. Our company reserves the right of final interpretation.
Package: One gift box, one user manual, one smart band unit.
Remark: The product supports waterproof with IP68 level, it is available to wear it
while wash hands, swim, in raining, etc.
Do not use it when have a hot shower/bath or sauna, the vapors will get into the
host, scratch damage of peripheral components. All these are beyond the scope of the
warranty.

Buttons Instruction:
Switch button: long press to switch on/off the device, short press to on/off the screen;
short press in the operate interface to back homepage.
Touch instructions: tap to select and enter a menu, slip right to return. At the home
slide down into status bar; slide right into notification center; slide left to enter the main
menu.
Charging instruction: this product adopts magnetic force charging. Put the
charging point connect to the back of the device charging pins, it will charge
automatically. It usually takes 2 hours to full charging, device standby time up to 30
days, 5-7 days for working. Do not use the watch when charging.
Caution: Do not make the magnetic charging cable any 2 pins connect with
conducting material at same time, it may cause short circuit.

Watch connects to Phone, download the App “Fundo” in the Phone at very first,
reference following 2 methods:
1) Android/iOS Phone: Scan following QR code image by browsers or by any
Scanner to Download “Fundo”.
2) Android Phone: search and download “Fundo” app from Google Play;
iOS phone: search and download “Fundo” app from Apps Store;

After installation, turn on cellphone Bluetooth and Fundo App, confirm the notifications
and others permission Apps asks are enabled, and fill up personal information. Tap
“Add device”, search “L8XXX” device (turn on the GPS in the smart phone before
binding) and tap connect.
● Firmware upgrade: When Bluetooth connected, in same interface of “Fundo”, click
“More- “Updates”, if there is new firmware available, click to update to the latest watch
firmware version.
Notice: If it is unsuccessful to upgrade, please reconnect the Bluetooth and try to
upgrade again.
As the Bluetooth protocol is different between all the mobile phone brands.
Sometimes the Bluetooth connection will be instability between mobile phone
and smart watch. Please restart the Bluetooth, then try to connect again. Some
settings on the phone need to be done for the data transmission work smoothly.
Please ignore if your phone does not have those functions.
Main Features:
● Language/Time/Date
：
It will synchronize the date & time from the phone when
Bluetooth is connecting.
● Standby interface: There are couples of dials for options, long press 2 seconds on
the home button to change when on the homepage.
● Notifications: synchronous all the phone notifications, such as Facebook,
WhatsApp, SMS, Email etc., if you want to display the notifications with contents, need
to setup to display the details of Facebook and WhatsApp notice function in the Apps
in the phone, it can show the latest 5 notifications, you can read the details, slide to
read next message. It will vibrate for incoming calls and messages. Press the Home
Button to stop the vibration.
● Status Bar: pull-down from the standby state screen. There will show Bluetooth
connection status, power percent information and brightness adjust. Slide left in status
bar to enter weather information, data sync from App, need keep phone GPS and
network on.
● Activity info: Showing the health data including Steps, Mileage, Calories of the day
and it will be saved at 12 o’clock every night then reset to 0 in the coming day. In the
histories you can find all the data that saved inside.
● Sleep monitor: The smart watch will turn on it automatically from 10p.m to 8a.m.
You can check the details of sleep quality by connecting Apps in the phone.
● Remote control music: Play the music at phone side, control at the watch side.
Weather forecast: the weather is synchronized from the APP to the watch. The
phone should turn on the GPS, and the local weather can only be obtained under

normal conditions.
ECG: With optical heart rate and ECG sensor are combined, the data need about
30 seconds to come out. After the measurement, the "ToAPP" interface will
appear. The ECG is saved on the phone "Fundo", which can be Shared to others
for reference.
Blood pressure: when monitoring, please put your hands flat, about 48 seconds
after the data will come out. General age is older the blood pressure is higher,
female than male a bit lower.
Heart rate: Waiting 2 seconds to start measuring and record the heart rate data by
scanning the surface capillary of the skin by green optical, slide to other menus to stop
measuring. Normally it will be 60-90 bpm, professional athletes may less than 60 bpm.
When doing strenuous exercise, the date may up to 200 bpm. Keep exercising can
increase heart and lung.
Blood Oxygen
：
SPO2H, it is the percent of oxygen in blood, normal rate is 94-99%.
● Exercise: Select a sport mode to record your work out. It will pause when press the
power button, then can choose to save, delete or continue the measuring. It will record
calories and heart rate in all the modes, you can check the details by sliding the screen.
Alarm: Set several alarm clocks through the App in the phone.
● Stopwatch: Press the start and pause, again press for stop.
Timer: Set a duration for time counting.
Find your phone: Tap it and phone makes a ringtone alert.
Bluetooth Camera: Phone unlock the screen, the watch into Bluetooth camera,
phone into the photo interface, tap the watch to take photos, photos save in the
phone album.
Setting
：
Power off
：
Tap to Power off.
About: Check the Model number, Bluetooth address, Version number.
Reset
：
Tap to recovery to factory mode.
Sedentary, water reminder
：
Via the App set a time for stand up or drink water
reminder.
Remind mode: Via the App choose a remind way, screen light, vibration, Screen
light+vibration.
Wrist bright screen
：
Set it in the App, it takes more power consumption when it is
on.
Units Setup
：
Metric or British system。
Data transmission: All the data will be saved in the device. No matter pedometer,
heart rate, sleep quality, and multi-sport mode, the data all can be transmitted to the
APP in the phone.
Warranty
1. If it appears quality problems caused by manufacturing, materials, design within one
year（since the day of purchase）, we will offer free warranty for main part. We will

offer free warranty for battery and adapter within 6 months. Premise is using normally
and correctly.
2. About the fault caused by the users’ personal reasons, we don't offer free warranty,
as follows:
1). Disassemble or refit the product.
2). Caused by immodesty drop
3). All artificial damage or misuse (such as: make water into the host, the external
force shatter, scratch damage of peripheral components, etc.), all these are beyond
the scope of the warranty.
3. When ask for free warranty, you must provide a warranty card with the seal of
purchase place and purchase date.
4. If you met problems during use, please contact the shop customer service which
you bought from.
5. Please make the final products as the standard.
Date of purchase:
Brand: LEOTEC
Supplier name: LEOTEC DIGITAL LIFESTYLE, S.L .. Address: Ctra. De l’Hospitalet 66 - 68
08940 - Cornellà de Llobregat - Barcelona
Tel : [phone]
NIF: B62646104
Web: www.leotec.com
We declare under our sole responsibility the conformity of the product:
Smartband Funny LEPFITF01
Country of Manufacture: China
To w hi c h t h i s d ec l a ra t i on r ef e r s, with the norm (s) or other normative document (s)
in accordance with the provisions of Directive 2014/53 / EU and 2011/65 / EU
The full text of the EU declaration of conformity is available at the following internet address:
(https://leotec.com/declaracion-de-conformidad)
The reference symbol, both on the product and in its user manual, indicates that at the end of the
useful life of electrical and / or electronic devices, these must be recycled separately from their
household waste. There are adequate means to collect this type of material for proper recycling.
For more information, contact your local authority or your distributor where you purchased the
product.
Note: The LEPFITF01 device may contain links to websites or websites operated by third parties
outside LEOTEC and / or World Driver S.A .. These links are incorporated and are accessible for
your information, LEOTEC and / or World Driver S.A. They are not responsible for their availability,
content, adequacy or accuracy. These external pages may contain
or refer to trademarks, patents, registered information, technologies, products, processes, or other
property rights belonging to other people. All rights reserved are property of their respective owners.
LESW18