LERAVAN Magic Touch User manual

Massage Master In The Pocket
User Manual
Please correct installation pole of the
battery
Have run out of battery should be removed
immediately, and change the new battery with
the same model at the same time
Please take out the battery when not in use for
a long time(more than 3 months)
Do not heat the battery, or thrown into the fire
Please abide by the provisions of the local
processing after use of the battery
Abandoned this product, please in
accordance with the relevant environmental
protection regulations of the city for process-
ing
Please do not use, store the product in the
following places.
• The place of direct sunlight
• The place of high temperature and high
humidity
• The places where there is water
• The dusty place
• The place near the fireworks
• The place of vulnerable to vibration impact
• The place of strong electromagnetic
Pay attention to the dust when storage the
electrode
• Electrodes with dust, will reduce the viscosi-
ty
TECHNICAL PARAMETERS
Designation
Power&Voltage
Pulse Width
Battery Life
Input Current
Standby Power Consumption
Output Voltage
Rated Time
Work Environment
Storage Environment
Recovery Time
BLE Communication Distance
Weight
Noumenon Dimention
Box Dimention
Operating Principle
Accessory
Massage Minimachine
2.2~3.3V(2032button battery)
Under200us, error of +-10%
About 1 month(Continuous use 15 minutes a day)
Mam:30mA in the strongest work mode
Max:10uA
0~100V +-10%,
15 minutes
operating temperature: 0ºC~+45ºC; operating humidity: 10%-90%
storage temperature: -10ºC~+70ºC; Storage humidity: 10%-90%
5s(aim at the electrodes shed when using)
In 10M(open air)
The host unit:19g(not contain battery and electrodes); host+box:77g(not contain battery and electrodes)
38x10(mm)
120x66x22.5(mm)
Use of muscle and nerve response to low frequency electric circulation make the skin surface
weak low frequency current local auxiliary massage to the body
Hosting product\storage bag\user manual\electrode slice(2pair)\CR2032battery(2pcs)
Points for AttentionBattery Use
THE COMPOSITION
OF PRODUCTS AND
ACCESSORIES
The following items are included in the packing box
Hosting Product
Accessory
Control section
Connecting wire
Operation keys
Power section
Electrode slice
(A)
Connection buckle Adhesive face
White sticker
Hand tear position
Electrode slice
(B)
Bluetooth indicator light
electrode slice
(2pair)
CR2032battery
(2pcs)
Storage bag User manual PASTE METHOD
Tear off of electrodes stickers
Note:
Used for the first time, please open the battery cover
(Refer to the battery replacement), take out the battery.
Take out the battery slot insulation piece, reload the
battery into the host.
Diagram of massage position
Shouldersand neck BackWaist
Arm Leg

USE MODE AFTER USING CARE AND MAINTENANCE
Mobil Control Mode
AUTO Mode
AUTO Mode
Mobil APP control
break away from Mobil
Click the to open it
Bluetooth lights flashing
Suspend the APP
before shutdown
Please be sure to tidy up after poweroff and LED light
off.
Care and maintenance of electrode slice
Care and maintenance of Host
1. Confirm the power is turned off,
the electrode slice gently removed
from the skin
Note:can hold the hand position
reserved to take electrode
2. Take the original stickers back
to electrodes
3. Put the Magic Touch stick into
the storage bag
Press and hold 1 second to
turn it off Bluetooth lights out
Open the phone
APP applications
Double-click to open it
2 levels of intensity
Work directly into
automatic mode
Turn off automatically
after work 15 minutes
After operation with Mobil control mode
Products to suspend work
APP Connect automatically
during use Click the to open
it Bluetooth lights flashing
transform to mode 1during use
Press and hold to turn it off
1. Remove the electrode slice from host
2. Drip about 10 drops of water, clear the dirt with Finger
abdomen
• do not use nails or brush
• do not soak in water
• do not wash, hang put
• do not use detergent
3. Dry moisture
4. The water vapour on the surface should be drying fully
• Do not use paper towel or rag to wipe paste
• Avoid direct sun
• The electrodes slice is consumables, if there are damage
or dirt on surface of the paste, please change in time
• Please use the cloth with water or warm water to wipe
the host
• Never use Thinner, Volatile Oil, Alcohol etc, or easy to
cause adverse or partly damaged, color, etc
• Can not wash the product directly to the faucet
Please replace the battery
when battery flashes
Battery life:about 1 month
(Continuous use 15 minutes a day)
Recommend to use
batteryCR2032
Please be sure to turn
off the power before
switching
BATTERY REPLACEMENT
ELECTRODE SLICE
REPLACEMENT
1. Open the shell of host power supply
2. Remove the old battery
3. +pole of the battery upwards, assembled battery
New
Old
4. Lock the battery cover
Please be sure to turn off the power before switching
1.Remove the electrode slice from the connection buckle
2.put the new electrode slice into the connection buckle
Long-term unused
1. Remove the battery
2. Use again, confirm that the LED lights
ONE YEAR LIMITED WARRANTY
FCC DISCLAIMER
This product promise users since the acquisition date,
under normal use if the host appeared quality problem, free
warranty for one year.The electrodes slice and the battery is
consumables, is beyond the scope of the warranty
Caution: The user is cautioned that changes or modifica-
tions not expressly approved by the party responsible for
compliance could void the user's authority to operate the
equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and
receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician
for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.