Letel TVP304 User manual

Shenzhen Letel Technology Co.,Ltd*User Manual for TVP304
User Manual
TVP304
IP Phone
Version 1.0
1

Shenzhen Letel Technology Co.,Ltd*User Manual for TVP304
ndex
1．Welcome ……………………………………………………………………………………………….. ….3
2．Installation ………………………………………………………………………………………….. …3
2.1 Package List ….…………………………………………………………………………………............4
2.2 Safety Compliances ………………………………………………………………………………….4
3．Product verview ………………………………………………………………………………………4
3.1 Key Features ...………...……………………………………………………………………………….4
3.2 Hardware Specification …..…………………………………………………………………………..6
4．Basic perations ………………………………………………………………………………………7
4.1 Get Familiar with LCD ……………………………………………………………………………..7
4.2 Get Familiar with Keypad ...…………………...……………………………………………………..8
4.3 Make Phone Calls…….……………………………………………………………..…………………10
4.3.1 Make Calls Using Regular Phone or Extension
Numbers ...............................10
5．Configuration with WEB..…………………………………………………..
……………..11
5.1 Current state.……………………………………………………………………………..11
5.2 User verification ………………………………………………………………...…….....13
5.3 Network configuration …………………..………………………………………………14
5.3.1 Wide area network（WAN……………………………………………………………..14
5.3.2 Local area network (LAN) ………………...…………………………………………..16
5.4 V IP configuration …………………………………………………………………...17
5.4.1 H.323 configuration ………..……………………………………………………….....17
5.4.2 SIP configuration …...………………………………………………………………….21
5.5 Advance configuration ……………………………………………………………….25
2

Shenzhen Letel Technology Co.,Ltd*User Manual for TVP304
5.5.1 Net Service configuration.……………………………………………………………....25
5.5.2 SIP advanced configuration …………………………………………………………….26
5.5.3 Value added service configuration …………………………………………………….30
5.5.4 DSP configuration ……………………………………………………………………..32
5.6 Number binding configuration ……………………………………………………...33
5.7 Save and Clear configuration ……………………………………………………….38
5.8 Upgrade on-line ……………………………………………………………………….39
5.8.1Upload WEB page …………………………………………………………………… 39
5.8.2 FTP download ………………………………………………………………………..40
5.8.3 Configuration files WEB download ………………………………………………….41
5.9 System management ………………………………………………………………………41
5.9.1 Account management ………………………………………………………………...41
5.9.2 Phone book configuration ……………………………………………………………43
1 Welcome
TVP304 series of SIP phones are innovative IP telephones that offer a rich set of functionality and
superb sound quality. They are fully compatible with SIP and H.323 industry standard and can
interoperate with many other SIP or H.323 compliant devices and software on the market.
2 Installation
TVP304 series IP phones are designed to look and feel like standard
telephones. The following photo illustrates the appearance of an TVP304
IP phone and the use of its key buttons.
3

Shenzhen Letel Technology Co.,Ltd*User Manual for TVP304
2.1 Package L st
The TVP304 phone package contains:
1) ne TVP304 phone
2) ne universal power adapter
3) ne Straight Ethernet cable
2.2 Safety Compl ances
The phone should only be operated with the universal power adapter
provided with the package. Damages to the phone caused by using other
4

Shenzhen Letel Technology Co.,Ltd*User Manual for TVP304
unsupported power adapters would not be covered by the manufacturer’s
warranty.
3 Product Overv ew
TVP304 IP Phone is a next generation IP network telephone based on
industry open standard SIP (Session Initiation Protocol) and H.323. Built
on innovative technology, TVP304 IP Phone features market leading
superb sound quality and rich functionalities at massaffordable price.
3.1 Key Features
Support two models: Bridge and Router(NAT&NAPT)
Network Protocols: TCP/UDP/IP 、ICMP 、HTTP 、DHCP
Client（WAN Interface）、DHCP Server（LAN Interface）、DNS
Client、DNS Relay、SNTP、PPPoE、FTP、TFTP
VoIP Protocols: Support H323 (V4)&SIP (RFC3261, RFC3262,
RFC3264, RFC3265) synchronously
Voice Codecs: G.711 （A-law/U-
law ）、G.723.1 、G.729A/B 、G.726，and G.722
Redundancy SIP server (or Gate Keeper): Can auto swap address
between two servers address
NAT transversal: Support STUN client, AVS and Citron etc . Can
modify SIP register port、HTTP server port、Telnet server port and
RTP port
Support two SIP server synchronously ：Can register two different
SIP server, and can make a call by either proxy
Support standard voice features such as numeric Caller ID Display,
Call Waiting, Hold, Transfer, Do-Not-disturb, Forward, in-band and
out-of-band DTMF, Hotline (off hook autodial), auto answer,ban
outgoing
Full duplex hands-free speakerphone, redial, call log, volume control,
voice record with indicator
Support standard encryption and authentication (DIGEST using MD5,
5

Shenzhen Letel Technology Co.,Ltd*User Manual for TVP304
MD5-sess)
Support Silence Suppression, VAD (Voice Activity Detection), CNG
(Comfort Noise Generation), Line Echo Cancellation (G.168), and
AGC (Automatic Gain Control)
Provide easy configuration thru manual operation (phone
keypad 、Web interface and Telenet) or automated centralized
configuration file via TFTP or HTTP.
Support firmware upgrade via TFTP/FTP and HTTP
Support syslog, can send event of phone to syslog server.
3.2 Hardware Specification
The table below describes the hardware specification.
Item Specification
Power Adapter Input 110-220V AC
utput 5V DC 1A
Port WAN 10/100Base T RJ-45
LAN 10/100Base T RJ-45
Power Consumption 2.8W/1.9W
LCD 74mmx29mm
perating Temperature 0～60℃
Relative Humidity 5～95%
Volume
Weight
4 Basic Operations
4.1 Get Fa iliar with LCD
TVP304 phone has a LCD of 74mmx29mm size and a backlight. Here is
the display when all segments illuminate:
6

Shenzhen Letel Technology Co.,Ltd*User Manual for TVP304
The LCD is equipped with a backlight. When the phone is in the normal
idle state, the backlight is off. Whenever an event occurs, the backlight
turns on automatically and brings the user’s attention.
Icon LCD Icon Definitions
Network Status Icon:
FLASH in the case of Ethernet link failure or the phone is not
registered properly.
Network Status Icon:
ON when Phone work on DHCP odel and FLASH when
DHCP client is not successful.
OFF when Phone is work on another odel
Network Status Icon:
ON when Phone work on Static odel and FLASH when IP
address is disable.
OFF when Phone is work on another odel
Network Status Icon:
ON when Phone work on PPPoE odel and FLASH when
PPPoE is not successful.
OFF when Phone is work on another odel
Message Status Icon:
ON and Flash if Phone has new essage include text essage
or voice record
Missed call display
ON and Flash if Phone has issed call and not be read.
H323 register Status:
FLASH when enable register and can not register successfully,
ON when enable register and register successfully,
OFF when disable register
SIP1 (Public sip server) register Status:
Flash when enable register and can not register successfully,
ON when enable register and register successfully,
OFF when disable register
SIP2 (Private sip server) register Status Icon:
Flash when enable register and can not register succedfully,
ON when enable register and register succedfully,
7

Shenzhen Letel Technology Co.,Ltd*User Manual for TVP304
OFF when disable register
Handset Status Icon:
ON if off hook
OFF if on hook
Hand-free Status Icon:
ON when phone work on hand-free odel
OFF when IDLE or work on handset odel
…Weekday Status Icon:
Nu erical Nu bers and Characters:
0 - 9
* # @
A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, Q, R, S, T, U, V, W,
X, Y, Z
4.2 Get Fa iliar with Keypad
TVP304 phone has a 28-button keypad.
Key Button Key Button Definitions
0 - 9, *, # Digit, star and pound keys are usually used
to make phone calls
Sysinfo Display basic information, including IP
address and gateway address
ENTER Enter key
Exit Back key
Volume Adjust volume by revolving
MENU Enter MENU mode when phone is in IDLE
mode.
UP Previous menu item when phone is in IDLE
mode r increase handset/speakerphone
volume
D WN Next menu item when phone is in IDLE
mode r reduce handset/speakerphone
volume
H LD Temporarily hold the active call
Transfer Transfer the active call to another party or
Enter 3-way conferencing call.
Redial/Send Dial a new number or Redial the number
last dialed. After entering the phone
number, pressing this key would force a call
to go out immediately before timeout
SPEAKER Enter hands-free mode
DEL Delete a key entry, call log, voice
mail and etc
8

Shenzhen Letel Technology Co.,Ltd*User Manual for TVP304
MUTE Mute an active call;
UT Dial call records
IN Incoming call records
REC RD Enter voice record menu
PB K User can make a call directly by # button if
choicing the proper person in phone number
book.
4.3 Make Phone Calls
4.3.1 Make Calls Us ng Regular Phone or Extens on Numbers
There are three ways to make phone calls:
1. Pick up handset or press SPEAKER button, and then enter the phone
numbers
2. Press the SEND/REDIAL button directly to redial the number last
called. nce pressed, the last dialed number will be displayed on the LCD
as the corresponding DTMF tones are played out and an outgoing call is
sent.
3. Browse the UTG ING/INC MING history and press the # button.
nce pressed, the last dialed number will be displayed on the LCD as the
corresponding DTMF tones are played out and an outgoing call is sent.
Examples:
To dial a number on the proxy, such as 1001, simply pick up handset or
press speaker phone, dial 1001 and then press the “SEND/(Re)Dial”
button.
To dial a PSTN number such as 62281486, you might need to enter in
some prefix number followed by the phone number. Please check with
your VoIP service provider to get the information. If your phone is
assigned with a PSTN-like number such as 62281493, most likely you
just follow the rule to dial 62281486 as if you were calling from a regular
analog phone, followed by pressing the “SEND/(Re)Dial” button.
5 Conf gurat on w th WEB
The IP Phone Web Configuration Menu can be accessed by the following URI: http://Phone-IP-
9

Shenzhen Letel Technology Co.,Ltd*User Manual for TVP304
Address. The default LAN IP address is “192.168.10.1” and WAN IP address is “192.168.1.179”.
If the web login port of the phone is configured as non-80 standard port，then user need to input
http://xxx.xxx.xxx.xxx：xxxx/，otherwise the web will show that no server has been found),it
will be shown as follows:
5.1 Current state
n this page user can gather information of each commonly-used parameter of the phone, it is
shown as the following figure：the network section shows the current WAN, LAN configurations
of the phone ：including gaining way of WAN IP and IP（static state, DHCP, PPPoE) ，MAC
address，WAN IP address of the phone，LAN IP address of the phone，opening state of LAN
DHCP server.
10

Shenzhen Letel Technology Co.,Ltd*User Manual for TVP304
The VoIP section shows the current default signaling protocol in use，and server parameter in use
of each protocol ： including GateKeeper IP of H323 ，H323ID ，whether enables
register，whether has registered on GK； Register server IP of SIP，proxy server IP，whether
enables register ，whether has registered on register server ，whether enables outbound
proxy，whether enables STUN server；
The Phone Number section shows corresponding phone number of each protocol；
The version number and date of issue have been shown at the end of the page；
5.2 User verification
User should login before configurating dialogue machine.
Guest account ：the default username and password are all" guest", user can have a browse of
system.
Administrator account ：the default username and password are all" admin" ，this user can
11

Shenzhen Letel Technology Co.,Ltd*User Manual for TVP304
configure the system.
Note ：after inputting username and password ，user press carriage return directly to enter the
page.
5.3
Network
configuration
5.3.1 W de area network（WAN）
User can view the current network IP linking mode of the system on this page.
User will be authorized to set the network IP，Gateway and DNS if the system adopts the static
linking mode.
If the system selects DHCP service in the network which is using DHCP service, IP address will
be gained dynamically.
If the system selects PPP E service in the network which is using the PPP E service, then the IP
address will be gained by the set PPP E ISP internet and password of the account.
Note ：if IP address has been odified, the web page will no longer respond owing to the
odification，so new IP address should be input in the address field now.
12

Shenzhen Letel Technology Co.,Ltd*User Manual for TVP304
Configuration Explanation：
Current phone IP， subnet mask，mac address and current phone IP；
，Select acquisition way of IP for WAN；This is single option；Configure static IP parameter for
WAN：
Configure static IP
address；
Configure subnet
mask；
Configure IP address
of the the phone；
Configure "dns
13

Shenzhen Letel Technology Co.,Ltd*User Manual for TVP304
domain" suffix ；if user input "domain" and it can't be resolved ，then the phone will add and
resolve the "domain" after user has input；
Main DNS server IP
address；
The second DNS
server IP address；
Configure PPPoE：
Service name ， if PPPoE ISP
has no special requirement for
this name，generally is the default；
PPPoE account；
PPPoE
password；
Configure the parameter and then click "apply" to go into effect；
5.3.2 Local area network (LAN)
User can make local area network (LAN) configuration on this page, when bridging mode is
selected, the local area network (LAN) configuration will no longer go into effect.
Configuration Explanation：
Use bridge mode （transparent
mode）：bridge mode will make the
phone no longer set IP address for
LAN physical port，LAN and WAN will join in the same network；
Configure LAN static IP；
Configure LAN subnet
mask；
Enable LAN port DHCP server ；
14

Shenzhen Letel Technology Co.,Ltd*User Manual for TVP304
after user modify LAN IP ，the phone will automatically modify the adjustment and save the
configuration according to IP and subnet mask team DHCP Lease Table，user need to restart the
phone to make DHCP server configuration go into effect；
Enable NAT ；
5.4 VOIP configuration
5.4.1 H.323 conf gurat on
User can configure specific parameter of H323 signaling protocol on this page；
Configuration Explanation：
show H323 register
state ；if register
successfully,there will show Registered in the square bracket，otherwise show Unregistered；
Configure default
GateKeeper IP
address；
15

Shenzhen Letel Technology Co.,Ltd*User Manual for TVP304
Configure default
GK port；
Configure default
GK ID ；if no special
requirement of
GK，user don't need to
fill in anything；
The system initiates
Q931 signal
port，the default is 1720；
Configure the net
gate RAS register
port for the system ；terminal user can logon to gatekeeper through RAS passage and make a
request for allowing to initiate the call request. If the request has been allowed, then the
gatekeeper will return a transport address（with IP address and port number）as the call signaling
passage of the called party；
Configure DTMF
mode ，RTP
mode ，RFC2833
mode ，H245-string mode
and H245-signal mode；
Configure permission for
no-registered call ，allow to
initiate call without net gate
register；
Early245 configuration ，which
means
that when initiating a call,the 225 message transmission begins at the
same time with 245 message transmission，the default is Disable；
Configure enable/cancel register
Configuration for transferring
245 message package to 225 message package；
Configure H323 to run the
talking only by G.7231
encode，the default is Disable；
Configure the phone use
H323 protocol as default call
protocol；
16

Shenzhen Letel Technology Co.,Ltd*User Manual for TVP304
Configure quick start mode to start
H323 call；
Configure multipexing of
logical channel ，the default is
Disable；
Configure the phone can receive
IVR ，such as the voice prompt,
dialing of PSTN color ring；
Configure GK backup and enable GK detecting and auto-swap functions ，the phone will
automatically swap to GK backup server when there is no response from default GK，and test the
default GK ；if the default GK recovers response ，the phone will automatically swap to the
default GK.
Configure GK
backup server IP；
Configure server
port for GK
backup；
Configure ID for
GK backup；
GK detection
interval time
configuration，the unit is second；
Enable the phone's auto-swap to
GK；
Configure the phone to detect GK
automatically
5.4.2 SIP conf gurat on
User can configure specific parameter of H323 signaling protocol on this page；
17

Shenzhen Letel Technology Co.,Ltd*User Manual for TVP304
Configuration Explanation：
show SIP register
state ；if register
successfully,there will show Registered in the square bracket，otherwise show Unregistered；
Configure SIP
register server IP
address；
Configure SIP
register server
signal port；
Configure SIP
register
account（usually it is the same with the port number that configured，some special SIP servers
will have different port configurations,then the port configuration needs to be configured to be
numbers，here the configuration account can be arbitrary character string）；
Configure
password of SIP
register account；
Configure proxy
server IP
address（usually SIP will provide user with service of proxy server and register server which have
18

Shenzhen Letel Technology Co.,Ltd*User Manual for TVP304
the same configuration ，so the configuration of proxy server is usually the same with that of
register server，but if the configurations of them are different(such as different IP addresses), then
each server's configuration should be modified separately）；
Configure SIP
proxy server
signal port；
Configure proxy
server account；
Configure proxy
server password；
Configure local
signal port ，the
default is 5060（this port will go into effect immediately, the SIP call will use the modified port
for communication after modification）
Configure expire
time of SIP
server register，the default is 600 seconds. If the expire time that server requires is more or less
than that configured by the phone，the phone can automatically modify it to the recommended
time limit and register；
Configure
detection interval
time of the server，if the phone enables SIP detection server function，the phone will detect once
for whether the server has response every other detection interval time；
Configure enable/disable
register；
Configure to enable public
outbound proxy. If proxy
server has been enabled，the phone will consider the user as using outbound proxy automatically.
If the configuration has been disabled，the phone can still be registered to the server，but can't
make SIP call；configuration of registered call by the phone will not have impacts on SIP point-
to-point call；
Configure SIP of the phone as
default protocol；
Enable the phone to
use protocol
edition.When the
phone need to
communicate with phones which is using SIP1.0 such as CISC 5300 and so on,then it should be
configured into RFC2543 to communicate normally. the default is to enable RFC3261； DTMF
sending mode configuration；three kinds：the above are basic configurations of SIP.
Note ：if you want to register and call through server ，you must configure corresponding
numbers （which are usually SIP accounts ）to local port ，otherwise the phone will reject for
sending out register message when it considers that there is no number.
19

Shenzhen Letel Technology Co.,Ltd*User Manual for TVP304
Configure automatic detection
server of the phone；
Configure main and backup
auto-swap server ；if the phone
enables main and backup server function ，the automatic detection and auto-swap functions
should both be chosen；
5.5 Advance configuration
5.5.1 Net Serv ce conf gurat on
User can set up Telnet, HTTP, RTP port on this page and view DHCP table.
Configuration Explanation：
Configure web browse
port ，the default is 80
port ，if you want to
enhance system safety，you'd better change it into non-80 standard port；
Configure telnet
port ，the default is 23
port；
Enable RTP initial
port configuration.
It is dynamic
20
After the aforesaid network and VoIP configurations have been configurated on the phone and
internetwork communication has been i ple ented，the user can ake VoIP calls by the
calling register and proxy.
SOME ISP INTERNET MAY INHIBIT THE PHONE TO REGISTER AND CANCEL THE
REGISTER IN SUCCESSION, SO USER HAD BETTER NOT APPLY OR REGISTER
AND CANCEL SOON IN SUCCESSION AND SUBMIT REGISTRATION REPEATEDLY.
SERVER MAY STOP RESPONSE OF DIALOGUE MACHINE, THEN THE PHONE
RECEIVES NO CERTIFICATION OF REGISTER/CANCEL LOGIN REQUEST AND
REGISTRATION STATE WILL SHOW AS INCORRECT!