LevelOne IEC-4000 User manual

IEC-4000
Industrial Fast Ethernet mini Media Converter
10/100Mbps RJ-45 Copper to 100Mbps SFP Fibre
Quick Installation Guide
v1.00 - 1402

IEC-4000 Page 1
Overview
LevelOne IEC-4000 is an industrial Fast Ethernet media
converter with a rugged aluminium case which providing superb
heat dissipation. This converter is designed to be mounted on
an industrial standard DIN-rail, plus the clearly visible status
LEDs provide simple monitoring of port link activity. It also
features Link Fault Pass Through in order to alert remote
location when link status changes.
High Reliability
All components are built to withstand harsh environment
applications without compromise where humidity, temperature
variation and even shock vibration are concerns, including
Electric & Utility, Critical Infrastructure, Transportation and
Surveillance Security. This device operates under -40 to 75
Celsius (-40 to 167 Fahrenheit) temperature.
Ultra-Compact
The ultra-compact converter has the smallest form-factor of any
such device in the world, but still offers industrial levels of
toughness. Housed in a rugged IP31 aluminium case with in-
built surge and ESD protection, the device measures just
59mm by 49mm, with a height of 36mm.

IEC-4000 Page 2
Features
10/100BaseT to 100Base-FX
Rugged aluminium case design in a ultra-compact form
factor
18V-36VAC & 12V-60VDC with polarity protection
Link Fault Pass through (LFP) function
Supports switch and pure converter mode
Surge & ESD protection
Maximum noise & interference immunity
-40°C to 75°C (-40°F to 167°F) operating temperature range
DIN-Rail or panel mount installation
Package Contents
Industrial mini Media Converter
Quick Installation Guide
DIN-rail & Panel mount kits

IEC-4000 Page 3
LED Status
LED
Status
Description
PWR
Steady
Power On
Off
Power Off
LK/Act
Steady
Fibre link established
Flashing
Transmitting or Receiving data
10/100Base-TX
Green
Steady
Network connection established
Flashing
Transmitting or Receiving data
Amber
Steady
100M speed is established
Off
10M speed is established

IEC-4000 Page 4
Power Input
Terminal Block
V+
18 –36VAC
12 –60VDC
V–
Neutral Ground
Earth Ground
Note:
This unit provides 3 pin terminal-block. And it can be operated
using either VAC or VDC power source. The VDC power range
is from 12VDC to 60VDC, and the VAC power range is from
18VAC to 36VAC. Always Make sure your input voltage is
within this supported voltage range.
WARNING –any exceeded input voltage will not make this unit
function and may damage this unit.
To make power connection –Follow the printed polarity for V+,
V- and Ground. Connect positive wire to V+, connect negative
wire to V-, and also connect neutral wire to ground.

IEC-4000 Page 5
DIP Switch
DIP2
DIP1
ON
LFP enabled
Converter Mode
OFF
LFP disabled
(default)
Switch Mode
(default)
Note:
This unit is equipped with dip switches, located on the front
panel marked as SW1. Adjusting the dip switches will change
the default function of this unit. This unit has set to
manufacturer default as: switch mode and LFP function off.
The table shown as you may change the dip switch setting to
your desired environment.

IEC-4000 Page 6
DIN Rail Mount
Assembly: Place the switch on the DIN rail from above using
the slot. Push the front of the switch toward the mounting
surface until it audibly snaps into place
Start-up: Connect the supply voltage to start up the switch
via the terminal block (or DC JACK)
Dismantling: Pull out the lower edge and then remove the
switch from the DIN rail

IEC-4000 Page 7
SFP Transceiver (Optional)
The IEC-4000 SFP slot supports pluggable modules (100Base-
X only) that enabling you to choose from a variety of
transceivers
Model No.
Description
Industrial
SFP-2100
125M MMF SFP Transceiver (2km, 850nm, -20 to 85C)
SFP-2200
125M MMF SFP Transceiver (2km, 1310nm, -40 to 85C)
SFP-2230
125M SMF SFP Transceiver (30km, 1310nm, -40 to 85C)
SFP-2260
125M SMF SFP Transceiver (60km, 1310nm, -40 to 85C)
SFP-2280
125M SMF SFP Transceiver (80km, 1310nm, -40 to 85C)
SFP-2300
125M SMF SFP Transceiver (20km, 1550nm, -40 to 85C)
SFP-2310
125M SMF SFP Transceiver (100km, 1550nm, -40 to
85C)
SFP-2320
125M SMF SFP Transceiver (120km, 1550nm, -40 to
85C)
Comm
ercial
SFP-1101
155M MMF SFP Transceiver (2km, 1310nm, 0 to 70C)
SFP-1311
155M SMF SFP Transceiver (20km, 1310nm, 0 to 70C)

IEC-4000 Page 8
SFP-1411
155M SMF SFP Transceiver (40km, 1310nm, 0 to 70C)