LevelOne VDS-0200 Manual


Ethernet over VDSL2
Converter (AnnexA) VDS-0200
H/W Version: 1
Why convert Ethernet to VDSL?
The LevelOne VDS-0200 converts your data
from Ethernet to VDSL, making it easy to send
high-bandwidth data over long distances. This
new technology uses traditional twisted-pair
telephone wiring instead of expensive Cat.5
cables.
New technology = cost-effective
deployment
When using VDSL2 (Very High Speed Digital
Subscriber Line) technology, users can transmit
data up to 300 meters without having to
add expensive Ethernet switches or cables
to extend the network reach. And with
100Mbps downstream and 60Mbps upstream,
VDSL2technology provides ample space for all
high bandwidth usage.
Fast transfer speeds? Yes.
Easy Installation? Yes.
VDS-0200 works especially well in applications
where traditional copper phone lines are
already installed: apartments, condominiums,
hotels, university campus, etc. There is no need
to run expensive Ethernet cables and installers
can easily integrate VDSL technology into the
existing network. The VDS-0200 is plug and play
ready and requires minimum installation time.
Customized settings
Each VDS-0200 also allows for customized
settings for advanced use. Using a built-in
DIP switch, users can customize the behavior
of the device to match the desired network
conguration.
Annex A
For networks that utilize PSTN telephone
systems.
Key Features
- Supports a VDSL connection up to 2km over
single pair copper wire
- Provides100Mbps downstream and 60Mbps
upstream over 300m
- Features selectable Fast and Interleaved modes
- Selectable xed data rate and xed SNR
margin
- Features 4 Dip Switches for Conguration
Settings
- Low-Latency for Video/Voice/Data applications
FSW-0811
8-Port Fast Ethernet Switch
Works Well With
1. LEDs
2. Dip Switch
3. Power Port
4. Telephone Port
5. VDSL2 Interface
6. 10/100Mbps Ports
WBR-6001
N_Max Wireless Broadband
Router
2 3 5 61 4 6


Media Converter
www.level1.com
I
one world_one brand_one level_
VDSL Transmission
ITU-T G.993.1/2, SG15Q4 DMT Compliance
Trellis Code with 1024 DMT bins
Max Data Rate: 100/60 Mbps
1 * RJ-11 Port for DSL
1 * RJ-11 Port for Telephone
LAN Interface
Auto-Detection for 10/100 BaseT and Half/Full duplex
High performance bridge for Ethernet extension
Fully compatible with IEEE802.3/IEEE802.3u
Automatic MDIX Function
RJ-45 Connector x 2
ITU-T G.993.1/2, SG15Q4 DMT Compliance
Trellis Code with 1024 DMT bins
Technical Specication
LEDs
Power, LAN1, LAN2 , DSL, M/S
Power Supply
DC 5V, 1A/2A
Dimension
120mm (L) x 90mm (W) x 28mm (H)
Operating Temperature and Humidity
Operating: 0°C ~ 50°C
Humidity: 5% ~ 95% (non-condensing)
EMI Certications
CE, FCC Class B
Product Diagram
Ofce B
Ofce C
Ofce D
Ofce E
Internet
VDS-0200/0201
Wireless Router
VDS-0202 BNC
VDS-0120 PSE
VDS-0130 PD
Modem Router
PC
Server IP Set up box
Phone
PSTN
PoE Switch
Ethernet Cable (RJ 45)
Phone Line (RJ 11)
BNC
PoE
VDS-0200/0201
VDS-0200/0201
Up to
100/60 Mbps
for 300meters
Ofce A
PD Switch
Up to
100/60 Mbps
for 300meters
VDS-0202 BNC
Up to
100/60 Mbps
for 400meters
Network
Camera
Up to
100/60 Mbps
for 300meters
VDS-0120 PSE
PD Device


Order Information VDS-0200: Ethernet over VDSL2 Converter
Package Contents VDSL2 Converter
Power Adapter
User Manual
Telephone Line
V1.0
All mentioned brand names are registered trademarks and property of their owners. Technical specications are subject to change without notice.
© Copyright 2009 Digital Data Communications GmbH. All Rights Reserved.