LevelOne WBR-6801 User manual

LevelOne
WBR-6801
150Mbps N Wireless 3G Portable Router
Quick Installation Guide
English
Português
Deutsch
Svenska
Français

Español
繁體中文
Nederlands
한국어
Dansk

Italiano


2
Table of Contents
English........................................................................................... 3
Deutsch....................................................................................... 10
Français ...................................................................................... 17
Español ....................................................................................... 24
Nederlands.................................................................................. 31
Dansk.......................................................................................... 38
Italiano......................................................................................... 45
...................................................................................... 52
Português.................................................................................... 59
Svenska ...................................................................................... 66
................................................................................. 73
繁體中文...................................................................................... 80
한국어.......................................................................................... 87
....................................................................................... 94
Default Settings
IP Address
192.168.1.1
Password
admin
Wireless Mode
Enable
Wireless SSID
LevelOne
Security
None
This guide covers only the most common situations. All detailed
information is described in the user manual.

3
Package Contents
WBR-6801
Power Adapter (5V, 1.2A)
USB Cable (Only for power use)
CD-ROM with Manual and Utility
Quick Installation Guide
If any of the above items are missing, please contact your retailer
or distributor.
Check Your Network Settings
1. Please make sure your PC can get IP address automatically
so the WBR-6801 can communicate with your PC during
configuration.



Select the TCP/IP protocol for your network card.
English

4
Click on the Properties button. You should then see the
following screen and make sure you have selected

2. Reboot computer to make sure you have received the
IP address correctly form the Router.

password details ready.

5
Installation
1 Turn off the power switch
2 Plug your USB modem which with activated USB dongle

6
3 You can choose either Power Adapter or USB Cable for
power supply
3.1 Use Power Adapter
3.2 Use USB cable

7
4 Turn on the power switch
LED indicators
LED color
Description
USB LED
Blue
3G/3.5G is on
Blue in flash
Data access
Wi-Fi LED
Blue
WLAN is on
Blue in flash
Data access
Blue in fast
flash
Device is in WPS mode

8
1. Start your WEB browser (Internet Explorer recommended).
In the Address box, enter the following:
http://192.168.1.1
2. When prompted, use the following password.
Password: admin

9
3. The first time you connect to the WBR-6801, you should run
the Setup Wizard to configure the Internet Connection.
Select Wizard and click Next.
This wizard will guide you through the setup in 6 easy steps.
Note: For effective wireless security, LevelOne recommends
WPA2-PSK encryption methods.

10
Packungsinhalt
WBR-6801
Netzteil (5V, 1.2A)
USB-Kabel (nur für die Stromversorgung)
CD-ROM mit Bedienungsanleitung und Dienstprogramm
Kurzanleitung
Wenn eines der oben genannten Teile fehlen sollte, wenden Sie
sich bitte an Ihren Fachhändler oder Distributor.
Ü berprüfen Sie Ihre Netzwerkeinstellungen
1. Bitte stellen Sie sicher, dass Ihr PC die IP-Adresse
automatisch empfangen kann, sodaß der WBR-6801
mit Ihrem PC während der Konfiguration
kommunizieren kann.
Sie "Systemsteuerung" > Netzwerkverbindungen".

Sie "Properties" aus.
-Protokoll" für Ihre Netzwerk-Karte.
Deutsch