LevelOne FCS-0031 User manual

FCS-0031
Megapixel PIR Lighting PoE Network Camera
Ver 1.0
LevelOne
User Manual

- -
Product name: Megapixel Cube Network Camera (FCS-0031)
Release Date: 2011/02/01
Manual Revision: V1.x Firmware 1.x.x.x
Web site:
www.level1.com
Default Settings
IPAddress DHCP
Username admin
Password admin
General Public License
This product incorporates open source code into the software and therefore falls under
the guidelines governed by the General Public License (GPL) agreement.
Adhering to the GPL requirements, the open source code and open source license for
the source code are available for free download at http://global.level1.com.
If you would like a copy of the GPL or other open source code in this software on a
physical CD medium, LevelOne (Digital Data Communications) offers to mail this CD to
you upon request, for a price of US$9.99 plus the cost of shipping.

- -
Table of Contents
Before You Use This Product ................................................................................ 0
Overview ........................................................................................................ 1
Device Appearance Description ............................................................................. 3
Installation ...................................................................................................... 5
System Requirements..........................................................................................................5
Camera Connection.............................................................................................................6
Software installation.............................................................................................................7
Access to the Network Camera ........................................................................... 14
Check Network Settings.....................................................................................................14
Add Password to prevent Unauthorized Access.................................................................14
Authentication ..................................................................................... 15
Installing plug-in.................................................................................................................16
Live View ...................................................................................................... 17
Configuration ............................................................................................... 20
Administrators can access the configuration page. .................................................... 20
Camera/Video/Audio..........................................................................................................20
Camera ............................................................................................ 20
Video ............................................................................................... 22
Audio ............................................................................................... 25
Multicast .......................................................................................... 26
Network .............................................................................................................................27
IP Setting .......................................................................................... 27
UPnP ............................................................................................... 28
DDNS (dynamic domain name service) ...................................................... 29
TZO ................................................................................................. 30
Easy Link.......................................................................................... 30
HTTP/HTTPS ..................................................................................... 31
Event.................................................................................................................................31
Motion Detection ................................................................................ 31
Notification setting ............................................................................. 32
Scheduled Event..............................................................................................................36
PIR .................................................................................................. 37
System Log ....................................................................................... 38
Date & Time Settings ........................................................................... 39
Device Information ............................................................................. 40
Maintenance.....................................................................................................................42

- -
User Management ............................................................................... 42
IP Filter ............................................................................................ 43
Firmware Upgrade .............................................................................. 43
Configuration .................................................................................... 44
Reset to default .................................................................................. 44

Before You Use This Product
The use of surveillance devices may be prohibited by law in your country. The Network
Camera is not only a high-performance web-ready camera but also can be part of a
flexible surveillance system. It is the user’s responsibility to ensure that the operation of
such devices is legal before installing this unit for its intended use.
It is important to first verify that all contents received are complete according to the list
in the "Package Contents" chapter. Take notice of the warnings in “Quick installation
guide” before the Network Camera is installed, then carefully read and follow the
instructions in the “Installation” chapter to avoid damages due to faulty assembly and
installation.
Package Contents
Camera
CD Manual/utility
QIG
Camera Stand
Power Adapter

- 1 -
Overview
The LevelOne FCS-0031 is designed for 24hrs home surveillance. It provides a distinct and
stylish design, with excellent features and quality, providing multiple applications and a wide
range of coverage. Users can view the live motion image anywhere through a web browser
via the Internet. With a megapixel progressive sensor and white LED, the FCS-0031 comes
with high-resolution quality and sharp sensitivity – an ideal solution for your day-and-night
surveillance system.
In addition, the FCS-0031 provides many advanced features, including human detection
sensor (PIR), Micro SD card slot and Privacy button. The FCS-0031 complies with 802.3af
PoE standard and supports flexible deployment, even in locations without power outlet.
With an "Easy Installation Wizard", this LevelOne IP camera is very user-friendly, perfect for
both home and business use. It is also embedded with a high-performance image sensor and
CPU. The FCS-0031 supports H.264, MPEG4 and MJPEG video compression, providing a
high resolution at 640x400 or 1280x800 for high-quality video and real-time viewing.

- 2 -

- 3 -
Device Appearance Description
<Front & Rear view >
< LEDs >
F/W upgrade Power LED
Privac LED Ethernet LED

- 4 -
<Hardware Reset >
The reset button is used to reset the system or restore the factory default settings. Sometimes
resetting the system can return the camera to normal operation. If the problems remain after
reset, please restore the factory settings and install it again.
Reboot - Please press and release the indented reset button within 1 second with paper clip
or thin object. Wait for the network camera to reboot.
Restore - Please press and hold the reset button until the status of LED turns off. It takes
about 10 seconds. Please note that all settings will be restored to factory default. Upon
successful restore, the status of LED will be blue again during normal operation.
<Micro-SD Card Capacity>
The network camera is compliant with Micro-SD/SDHC (Maximum 32GB) cards.

- 5 -
Installation
System Requirements
Operating System
Microsoft Windows XP Home Edition SP2
Microsoft Windows XP Professional SP2
Computer
IBM PC/AT Compatible
CPU
Pentium 3GHz or faster
Memory
1024 MB or more
Monitor
1024 x 768 pixels or more, 24-bit True color or better
Network Interface
10/100Mbps Network interface card must be installed
Web Browser
Microsoft Internet Explorer 6.0 SP2
CD-ROM Drive
It is necessary to read the operating instructions in the provided CD-ROM.
Adobe Reader
It is necessary to read the operating instructions in the provided CD-ROM.
Audio function will not be working if a sound card is uninstalled on PC. Audio may be
interrupted depending on the network environment.

- 6 -
Camera Connection
Basic Connection
1. Connect the supplied power cable from the camera to the power outlet.
2. Connect the camera to a switch via Ethernet cable.
Please check your product package contains all the accessories listed in the foregoing
Package Contents. Upon powering up, the power LED will become lighted first and then
the device will go through booting process. The status LED will be steady amber for getting
IP address. After getting IP Address, the link LED will blink orange while network
connection is processing.

- 7 -
Software installation
In this manual, "User" refers to whoever has access to the Network Camera, and
"Administrator" refers to the person who can configure the Network Camera and grant user
access to the camera.
After hardware connection checking, the users can run the Installation Wizard program
included in the product CDROM to automatically search for the Network Camera in the
Intranet. There may be many Network Cameras in the local network. Users can differentiate
the Network Cameras with the serial number. The serial number is printed on the labels on the
carton and the bottom of the Network Camera body.
1. Insert the Installation CD into the CD-ROM driver. Click install and shows the welcome
screen. Follow the steps to install the Installation wizard on user’s computer.

- 8 -

- 9 -

- 10 -
2. Do not check the box if user would like to check the hardware installation settings,
Otherwise click “Skip the hardware installation” to skip the hardware connection checking,
the program will automatically search for the Network Camera in the Intranet.
Click “Start” to continue.

- 11 -
3. Select the Network Camera from the survey list and enter the user name and password.
The user name and password are assigned as “admin/admin”.

- 12 -
4. Setting the Network Camera IP address
User can either select simple mode or professional mode for network camera IP setting. If
simple mode is selected, the easy configuration program will set up the connection
automatically. If professional mode is selected, the user will need to configure the IP
manually, The DHCP setting is recommended. If user wants to set IP address manually,
please refer to the product user manual.

- 13 -
5. Please make sure the internet connection is ready then start to do the internet discovery,
otherwise click “Skip” to finish the setting.
The default domain name is MAC address; you can also register with your own name
on-line.
6. After finish setting, the connection successful or fail showed. If connection failed, user can
either try again or quit the installation. User can either select “Run PC-NVR” or "Start Web
GUI" to continue or click “X” on the top right of the screen to finish the installation.
Once installation is completed, the Administrator should proceed to the next section
"Access to the Network Camera" for necessary checks and configurations.

- 14 -
Access to the Network Camera
Check Network Settings
The Network Camera can be connected either before or immediately after software
installation onto the Local Area Network. The Administrator should complete the network
settings on the configuration page, including the correct subnet mask and IP address of
gateway and DNS. Ask your network administrator or Internet service provider for the detail
information.
Add Password to prevent Unauthorized Access
The Administrator should immediately implement a new password as a matter of
prudent security practice. The user name and password for the Administrator are assigned
as “admin/admin”. Once the Administrator’s password is saved, the Network Camera will ask
for the user’s name and password before each access. The Administrator can set up a
maximum of ten (10) user accounts. Each user can access the Network Camera except to
perform system configuration. Once the password is changed, the browser will display an
authentication window to ask for the new password. Once the password is set, there is no
provision to recover the Administrator’s password. The only option is to restore to
the original factory default settings.

- 15 -
Authentication
After opening the Web browser and typing in the URL of the Network Camera, a dialogue
window pops up to request a username and password. The user name and password for the
Administrator are assigned as “admin/admin”. Upon successful authentication, the following
figure is displayed.
The foreground is the login window and the background shows the message if authentication
fails. The user may check the option box to save the password for future convenience. This
option is not available to the Administrator for obvious reason.