LevelOne FCS-6010 User manual

1
FCS-6010
Day/Night 1.3-Megapixel P/T
PoE Network Camera
User Manual
Ver1.0

2
Product name:
Day/Night 1.3-Megapixel P/T
PoE Network Camera
(FCS-6010)
Release Date:
2011/11/21
Manual Revision:
V1.0
Firmware 1.0.0.11
Web site:
www.level1.com
Made in Taiwan.
Default Settings
IPAddress
DHCP
Username
admin
Password
admin

3
Table of Contents
1. Before You Use This Product...................................................................................................5
1.1 Package Contents.....................................................................................................................5
2. Network Camera Overview ....................................................................................................6
3. Device Appearance Description..............................................................................................7
3.1 Front & Rear view.....................................................................................................................7
3.2 Micro-SD Card Capacity............................................................................................................7
Installation ..........................................................................................................................................8
4.1 System Requirements ...............................................................................................................8
4.2 Software installation ................................................................................................................8
4.3 Setting the Network Camera IP address.................................................................................13
4. Access to the Network Camera.............................................................................................15
5.1 Check Network Settings .........................................................................................................15
5.2 Add Password to prevent Unauthorized Access......................................................................15
5. Authentication .....................................................................................................................16
6.1 Installing plug-in.....................................................................................................................16
6. Live View ............................................................................................................................. 17
7.1 View Mode.............................................................................................................................17
7. Camera/Video/Audio...........................................................................................................22
8.1 Camera...................................................................................................................................22
8.2 Video ......................................................................................................................................23
8.3 Audio ......................................................................................................................................25
8.4 Multicast ................................................................................................................................26
8.5 Privacy Mask ..........................................................................................................................26
8.6 Multi Camera .........................................................................................................................27
8.7 NTSC / PAL..............................................................................................................................27

4
8. Camera Control .................................................................................................................... 28
9.1 Preset Positions ......................................................................................................................28
9.2 Patrol Settings........................................................................................................................29
9. Network............................................................................................................................... 30
10.1 IP Setting ................................................................................................................................30
10.2 UPnP.......................................................................................................................................32
10.3 DDNS(dynamic domain name service) ...................................................................................32
10.4 Easy Link.................................................................................................................................33
10.5 HTTP/HTTPS ...........................................................................................................................34
10. Event....................................................................................................................................35
11.1 Motion Detection ...................................................................................................................35
11.2 Notification Settings...............................................................................................................36
11.3 Scheduled Event .....................................................................................................................39
11.4 DI/DO .....................................................................................................................................39
11. System .................................................................................................................................40
12.1 System Log .............................................................................................................................40
12.2 Date and Time........................................................................................................................41
12.3 Device Information.................................................................................................................42
12.4 Storage Management ............................................................................................................43
12.5 LED Indicators ........................................................................................................................44
12. Maintenance........................................................................................................................44
13.1 User Management .................................................................................................................44
13.2 IP Filter ...................................................................................................................................45
13.3 Firmware Upgrade .................................................................................................................46
13.4 Configuration .........................................................................................................................46
13.5 Reset to Default...................................................................................................................... 47
13.6 Reboot.................................................................................................................................... 47

5
1. Before You Use This Product
The use of surveillance devices may be prohibited by law in your country. The Network Camera is not
only a high-performance web-ready camera but also can be part of a flexible surveillance system. It is
the user’s responsibility to ensure that the operation of such devices is legal before installing this unit
for its intended use.
It is important to first verify that all contents received are complete according to the list in the
"Package Contents" chapter. Take notice of the warnings in “Quick installation guide” before the
Network Camera is installed, then carefully read and follow the instructions in the “Installation”
chapter to avoid damages due to faulty assembly and installation.
1.1 Package Contents
FCS-6010
Power Adapter
Bracket
RJ45 Ethernet LAN Cable
Quick Installation Guide
CD Manual / Utility

6
2. Network Camera Overview
Product Overview
The LevelOne FCS-6010 with built-in high performance H.264 1.3-Megapixel CMOS sensor delivers
high quality images up to 1280x1024 resolution. It is able to broadcast live images to your mobile
phone or PDA, and supports 3GPP/ ISMA RSTP format for 3G mobile phones.
Build-in IR LED and ICR for Day/Night
The FCS-6010 features 10 IR illuminators built around the lens for a clear view at night up to 10
meters distance. With the built-in ICR, the FCS-6010 provides a good video quality in both day and
night.
Support remote16CH Live View
The FCS-6010 allow you to monitor up to 16 cameras video simultaneously via a Internet Explorer
(ActiveX)
1.3-Megapixel with H.264 / MPEG4 / MJPEG Compression
The Level1 FCS-6010 supports triple-mode video compression. In order to achieve the highest video
quality and/or faster video transmission, users can select MJPEG, MPEG4 or H.264 compression
mode depending on their network settings. In addition, the FCS-6010 provides many advanced
features, including PoE, DI/DO, TV out (video), 2-Way audio, Micro-SD/SDHC card slot for local
storage and a USB port for an upgrade to wireless connections by optional with WUA-0606 (150Mbps
Wireless USB Adapter).

7
3. Device Appearance Description
3.1 Front & Rear view
The reset button is used to reset the system or restore the factory default settings. Sometimes
resetting the system can return the camera to normal operation. If the problems remain after reset,
please restore the factory settings and install it again.
Reboot - Please press and release the indented reset button within 1 second with paper clip or thin
object. Wait for the network camera to reboot.
Restore - Please press and hold the reset button until the status of LED turns off. It takes about 10
seconds.
3.2 Micro-SD Card Capacity
The network camera is compliant with Micro-SD/SDHC (Maximum 32GB) cards.

8
Installation
4.1 System Requirements
Operating System
Microsoft Windows XP Home Edition SP2
Microsoft Windows XP Professional SP2
Computer
IBM PC/AT Compatible
CPU
Pentium 3GHz or faster
Memory
1024 MB or more
Monitor
1024 x 768 pixels or more, 24-bit True color or better
Network Interface
10/100Mbps Network interface card must be installed
Web Browser
Microsoft Internet Explorer 6.0 SP2
CD-ROM Drive
It is necessary to read the operating instructions in the provided CD-ROM.
Adobe Reader
It is necessary to read the operating instructions in the provided CD-ROM.
4.2 Software installation
In this manual, "User" refers to whoever has access to the Network Camera, and "Administrator"
refers to the person who can configure the Network Camera and grant user access to the camera.
After hardware connection checking, the users can run the Installation Wizard program included in
the product CDROM to automatically search for the Network Camera in the Intranet. There may be
many Network Cameras in the local network. Users can differentiate the Network Cameras with the
serial number. The serial number is printed on the labels on the carton and the bottom of the Network
Camera body.

9
Insert the Installation CD into the CD-ROM driver. Click install and shows the welcome screen.
Follow the steps to install the Installation wizard on user’s computer.

10

11
Do not check the box if user would like to check the hardware installation settings, Otherwise click
“Skip the hardware installation”to skip the hardware connection checking, the program will
automatically search for the Network Camera in the Intranet.
Click “Start”to continue.

12

13
Select the Network Camera from the survey list and enter the user name and password. The user
name and password are assigned as “admin/admin”.
4.3 Setting the Network Camera IP address
User can either select simple mode or professional mode for network camera IP setting. If simple
mode is selected, the easy configuration program will set up the connection automatically. If
professional mode is selected, the user will need to configure the IP manually, The DHCP setting is
recommended. If user wants to set IP address manually, please refer to the product user manual.

14
Please make sure the internet connection is ready then start to do the internet discovery, otherwise
click “Skip”to finish the setting.
The default domain name is MAC address; you can also register with your own name on-line.

15
After finish setting, the connection successful or fail showed. If connection failed, user can either try
again or quit the installation. User can either select Start Web GUI to continue or click “X”on the top
right of the screen to finish the installation.
Once installation is completed, the Administrator should proceed to the next section "Access to the
Network Camera" for necessary checks and configurations.
4. Access to the Network Camera
5.1 Check Network Settings
The Network Camera can be connected either before or immediately after software installation onto
the Local Area Network. TheAdministrator should complete the network settings on the configuration
page, including the correct subnet mask and IP address of gateway and DNS. Ask your network
administrator or Internet service provider for the detail information.
5.2 Add Password to prevent Unauthorized Access
The Administrator should immediately implement a new password as a matter of prudent security
practice. The user name and password for the Administrator are assigned as “admin/admin”. Once
the Administrator’s password is saved, the Network Camera will ask for the user’s name and
password before each access. TheAdministrator can set up a maximum of ten (10) user accounts.
Each user can access the Network Camera except to perform system configuration. Once the
password is changed, the browser will display an authentication window to ask for the new password.
Once the password is set, there is no provision to recover the Administrator’s password. The only
option is to restore to the original factory default settings.

16
5. Authentication
After opening the Web browser and typing in the URL of the Network Camera, a dialogue window
pops up to request a username and password. The user name and password for the Administrator
are assigned as “admin/admin”. Upon successful authentication, the following figure is displayed.
The foreground is the login window and the background shows the message if authentication fails.
The user may check the option box to save the password for future convenience. This option is not
available to the Administrator for obvious reason.
6.1 Installing plug-in
For the initial access to the Network Camera in Windows, the web browser may prompt for
permission to install a new plug-in for the Network Camera on the Internet Explorer. Permission
request depends on the Internet security settings of the user’s PC or notebook. If the highest security
level is set, the computer may prohibit any installation and execution attempt. This plug-in has been
registered for certificate and is used to display the video in the browser. Users may click on
to proceed. If the web browser does not allow the user to continue to install, check
the Internet security option and lower the security levels or contact your IT or networking supervisor
for help.

17
6. Live View
7.1 View Mode
FCS-6010 support remote 16 channel function
You can setup FCS-6010 as a master IPcam to remote viewing other camera's video screen in
FCS-6010 Web configuration page.

18
Single
In single mode, you can check one camera video in the full screen.
You can select the drop-down menu to select the camera 1 to camera 16.
Multiple
In multiple mode, you can check 4 cameras video in the same screen.
You can select the drop-down menu to select the camera 1~4 to camera 13~16.
If you want to add camera2~camera4 in this screen, click the ch2~ch4 screen to add camera. It will
pop up a connect setting screen as following.

19
Auto Scan
In auto scan mode, you can check one camera video in the full screen.
The device will automatically change to next camera video each per 10 seconds.
You can select the drop-down menu to change the time parameter from 10 seconds to 100 seconds.
Live View
is the default page that opens when accessing the Network Camera. Live video is displayed directly
in the browser window.
Stream1/Stream2 Channels
The network camera offers simultaneous dual stream for optimized quality and bandwidth. To
configure the codec compression and video resolution, please go to the
Configuration->Camera/video/audio->Video to make the changes, or refer to the Video configuration
page.

20
TCP/UDP protocol
TCP - This protocol guarantees the complete delivery of streaming data and thus provides better
video quality. Nevertheless, the downside with this protocol is that its real-time effect is not as good
as that of the UDP protocol.
UDP - This protocol allows for more real-time audio and video streams. However, network packets
may be lost due to network burst traffic and images may be broken. Activate UDP connection when
occasions require time-sensitive responses and the video quality is less important.
LED Control
Select from the drop-down list to adjust the brightness of the camera’s LED.
Click Apply or Reset to take effect.
/ Recording on/off: shows the status of recording video
/ MIC on/off: shows the status of MIC volume.
/ MD on/off: shows the status of Motion Detection
Camera Control Panel - There are two slider bars and eight control buttons on the remote controller.
They are describe as below:
Brightness and Mic volume adjustment - Drag the slider bar to adjust the image brightness level
and Mic volume. Click “Default” for default brightness setting and “Mute” for no sound. For more
Audio setting, please refer to the Audio configuration on page 22.
Speaker –You can output the audio form the computer’s audio input terminal to the camera’s built-in
speaker output.
Play or Stop - Click this button to play or stop the video.
Recording - Click this button to record video to your computer.
Snapshot - Click this button to capture and save still images.
Digital Zoom - Click this button to enable the zoom operation.
Mirror - horizontally reflect the display of the live video.
Flip - vertically reflect the display of the live video.