LevelOne IES-0600 User manual

4
TX + 1 Switch SFP + 1Combo
Quick Installation Guide
IES-0600
TX + 1 Switch SFP + 1Combo
-
40 to 75C
Quick Installation Guide
40 to 75C
Quick Installation Guide
v1.00 - 1401
IES-0600 Page 1
Overview
Leve One IES-0600 Industry Ethernet Switch provides 4 ports
of 10/100/1000Base-T Ethernet p us 2 ports of Gigabit SFP to
enab e high speed network at mission-critica environment. The
compact meta housing is designed for desktop space saving,
p us the c ear y visib e status LEDs provide simp e monitoring of
port ink activity. Moreover, the SFP s ots support p uggab e
modu es that enab ing you to choose from a variety of
transceivers.
High Reliability
A components are bui t to withstand harsh environment
app ications without compromise where humidity, temperature
variation and even shock vibration are concerns, inc uding
E ectric & Uti ity, Critica Infrastructure, Transportation and
Survei ance Security. This device operates under -40 to 75
Ce sius (-40 to 167 Fahrenheit) temperature.
lug & lay
This unmanaged Industria Ethernet Switch is designed for the
demanding industria environments at businesses in need of
instant connectivity with no setup or configure required, tru y
p ug and p ay.
IES-0600 Page 2
Features
• Meets NEMA TS1/TS2 Environmenta requirements such as temperature,
shock, and vibration for traffic contro equipment
• Meets EN61000-6-2 & EN61000-6-4 EMC Generic Standard Immunity for
industria environment
• Supports 1024 MAC addresses. Provides 1M bits memory buffer
• Provides one combo Gigabit ports. SFP socket for Gigabit fibre optic
expansion.
• Store-and-forward mechanism. Fu wire-speed forwarding rate.
• Power Supp y: 12~55VDC Termina B ock power input.
• 5.52W power consumption 48VDC @ 0.12A (unit on y)
• -40℃ to 75℃ (-40℉ to 167℉) operating temperature range.
• Tested for functiona operation @ -40℃ to 85℃ (-40℉ to 185℉).
• Hardened meta case
ackage Contents
 IES-0600
 Quick Insta ation Guide
IES-0600
LED Status
LED
Status
PWR 1, 2
Steady
Off
P1 ~ P4
Steady
Off
10/100/1000Base-TX
(T1 ~ T5)
LNK
Steady
F ashing
SPD
Steady
Off
1000Base-SF
F5
Steady
F ashing
F6
Steady
Off
LED Status
Status
Description
Power On
Power Off
PD is connected
No PD is connected
(T1 ~ T5)
Network connection estab ished
F ashing
Transmitting or Receiving data
1000M speed is estab ished
10M or 100M speed is estab ished
Network connection estab ished
F ashing
Transmitting or Receiving data
A va id
connection estab ished
No connection is being estab ished
Page 3
Description
Network connection estab ished
Transmitting or Receiving data
1000M speed is estab ished
10M or 100M speed is estab ished
Network connection estab ished
Transmitting or Receiving data
connection estab ished
No connection is being estab ished

IES-0600
ower Input
Termina B ock
PW1
PW2
Relay Output
ower Input
+
12
–
55
VDC
–
Power Ground
+
12 – 55VDC
–
Power Ground
Relay Output
1A @ 24VDC
Page 4 IES-0600
DI Switch
OFF
T5 (RJ45) enab ed
ON
F5 (SFP) enab ed
Note:
Port5 (T5 & F5) is shared combo port
RJ45 or SFP via DIP1 switch
DI Switch
DI 1
DI 1
T5 (RJ45) enab ed
1000M
F5 (SFP) enab ed
100M
Port5 (T5 & F5) is shared combo port
, enab e either
RJ45 or SFP via DIP1 switch
Page 5
DI 1
1000M
100M
, enab e either
IES-0600
DIN Rail Mount
•
Assemb y: P ace the switch on the DIN rai from above using
the s ot. Push the front of the switch toward the mounting
surface unti it audib y snaps into p ace
• Start-
up: Connect the supp y vo tage to start up the switch
via the termina b ock (or DC JACK)
•
Dismant ing: Pu out the ower edge and then remove the
switch from the DIN rai .
DIN Rail Mount
Assemb y: P ace the switch on the DIN rai from above using
the s ot. Push the front of the switch toward the mounting
surface unti it audib y snaps into p ace
up: Connect the supp y vo tage to start up the switch
via the termina b ock (or DC JACK)
Dismant ing: Pu out the ower edge and then remove the
switch from the DIN rai .
Page 6
Assemb y: P ace the switch on the DIN rai from above using
the s ot. Push the front of the switch toward the mounting
up: Connect the supp y vo tage to start up the switch
Dismant ing: Pu out the ower edge and then remove the
IES-0600
10/100/1000Base
The fo owing ists the
in
10/100 DC & Data
1
Rx + DC +
2
Rx -
3
T
x + DC
4
unused
5 unused
6 Tx -
7 unused
8 unused
10/100/1000Base
-
TX in
The fo owing ists the
pin-out of 10/100/1000Base
-
10/100 DC & Data
1000
DC & Bi
Rx + DC +
TxRx A + DC +
DC + TxRx A -
x + DC
-
TxRx B + DC
TxRx C +
TxRx C -
DC - TxRx B -
TxRx D +
TxRx D -
Page 7
TX in
-
TX ports
DC & Bi
-
Data
TxRx A + DC +
DC +
TxRx B + DC
-
DC -