LevelOne IES-0883 User manual

IES-0883
6 GE + 2 SFP Managed Switch -20 to 60C, DIN-rail
User Manual
v1.00 -1206

IES-0883 User Manual Page 1
Preface
This manual describes how to install and use the Industrial Managed Gigabit Ethernet
Switch. This switch introduced here is designed to deliver full scalability with SNMP/RMON
web-based management functions by providing:
To get the most out of this manual, you should have an understanding of Ethernet
networking concepts.
In this manual, you will find:
Features on the Industrial Managed Gigabit Ethernet Switch
•Illustrative LED functions
•Installation instructions
•Management Configuration
•S N M P, I G M P…
•Specifications

IES-0883 User Manual Page 2
Table of Contents
PREFACE...........................................................................................................................................................1
QUICK START GUIDE.........................................................................................................................................4
PHYSICAL DESCRIPTION ............................................................................................................................................ 4
FUNCTIONAL DESCRIPTION ....................................................................................................................................... 6
CONSOLE CONFIGURATION ....................................................................................................................................... 6
WEB CONFIGURATION ............................................................................................................................................. 8
PRODUCT OVERVIEW.......................................................................................................................................9
INDUSTRIAL MANAGED GIGABIT ETHERNET SWITCH ...................................................................................................... 9
PACKAGE CONTENTS ................................................................................................................................................ 9
PRODUCT HIGHLIGHTS ........................................................................................................................................... 10
FRONT PANEL DISPLAY ........................................................................................................................................... 12
PHYSICAL PORTS ................................................................................................................................................... 14
SWITCH MANAGEMENT ......................................................................................................................................... 15
INSTALLATION................................................................................................................................................16
SELECTING A SITE FOR THE SWITCH ........................................................................................................................... 16
WIRING DIAGRAM ................................................................................................................................................ 16
DIN RAIL MOUNTING ............................................................................................................................................ 17
CONNECTING TO POWER ........................................................................................................................................ 18
CONNECTING TO YOUR NETWORK ............................................................................................................................ 20
SWITCH MANAGEMENT.................................................................................................................................21
MANAGEMENT ACCESS OVERVIEW ........................................................................................................................... 21
ADMINISTRATION CONSOLE (CLI) ............................................................................................................................ 22
WEB MANAGEMENT ............................................................................................................................................. 23
SNMP-BASED NETWORK MANAGEMENT ................................................................................................................. 23
PROTOCOLS ......................................................................................................................................................... 23
MANAGEMENT ARCHITECTURE ................................................................................................................................ 24
SNMP & RMON MANAGEMENT.....................................................................................................................25
OVERVIEW ........................................................................................................................................................... 25
SNMP AGENT AND MIB-2 (RFC 1213) .................................................................................................................. 25
RMON MIB (RFC 2819) AND BRIDGE MIB (RFC 1493) ........................................................................................... 26
WEB-BASED BROWSER MANAGEMENT .........................................................................................................28
LOGGING ON TO THE SWITCH ................................................................................................................................... 28
UNDERSTANDING THE BROWSER INTERFACE ............................................................................................................... 29
SYSTEM ............................................................................................................................................................... 31
PORT .................................................................................................................................................................. 38
SWITCHING .......................................................................................................................................................... 41
TRUNKING ........................................................................................................................................................... 44
STP / RING ......................................................................................................................................................... 45
VLAN ................................................................................................................................................................ 51
QOS ................................................................................................................................................................... 55
SNMP ............................................................................................................................................................... 57
802.1X .............................................................................................................................................................. 61
OTHER PROTOCOLS ............................................................................................................................................... 64
COMMAND LINE CONSOLE MANAGEMENT ...................................................................................................68
ADMINISTRATION CONSOLE .................................................................................................................................... 68
SYSTEM ............................................................................................................................................................... 77
PORT .................................................................................................................................................................. 86

IES-0883 User Manual Page 3
SWITCHING .......................................................................................................................................................... 90
TRUNKING ........................................................................................................................................................... 95
STP / RING ......................................................................................................................................................... 96
VLAN .............................................................................................................................................................. 109
QOS ................................................................................................................................................................. 115
SNMP ............................................................................................................................................................. 118
802.1X ............................................................................................................................................................ 127
OTHER PROTOCOLS ............................................................................................................................................. 132
SPECIFICATIONS...........................................................................................................................................143
APPENDIX A.................................................................................................................................................144
APPENDIX B.................................................................................................................................................145

IES-0883 User Manual Page 4
Quick Start Guide
This quick start guide describes how to install and use the Industrial Managed Gigabit
Ethernet Switch. This is the switch of choice for harsh environments constrained by space.
Physical Description
The Port Status LEDs and Power Inputs
Power Input
Terminal Block
PW1 + 12 – 32VDC
– Power Ground
PW2 + 12 – 32VDC
– Power Ground
Earth Ground
Relay Output 1A @ 24VDC
Relay Alarm warning signal disable for following:
1. The relay contact closes if Power1 and Power2 are both failed but Power3 on
2. The relay contact closes if Power3 is failed but Power1 and Power2 are both on
•There are three power inputs can be used. Redundant power function is supported
PW3 is DC Jack type with 12VDC input

IES-0883 User Manual Page 5
LED Status
LED
Status
Description
PW 1,2,3 Steady Power On
Off Power Off
10/100/1000Base-TX & 1000Base-FX
LNK/ACT Steady Network connection established
Flashing Transmitting or Receiving data
100
Amber Connection at 1000Mbps speed
Green Connection at 100Mbps speed
Off Connection at 10Mbps speed
Alarm
Alarm
Steady State the power redundancy failure has
being addressed
Off State the power redundancy failure has
not being addressed

IES-0883 User Manual Page 6
Functional Description
•Meets EN61000-6-2 & EN61000-6-4 EMC Generic Standard Immunity for industrial
environment.
•Manageable via SNMP, Web-based, Telnet, and RS-232 console port.
•Supports Command Line Interface in RS-232 console.
•Supports IEEE802.3/802.3u/802.3ab/802.3z/802.3x. Auto-negotiation:
10/100/1000Mbps, full/half-duplex. Auto MDI/MDIX.
•1000Base-SX/LX: Multi mode or Single mode SC type, 1000Base-BX: WDM Single mode
SC type.
•Supports 4096 MAC addresses. Provides 1M bits memory buffer.
•Store-and-forward mechanism.
•Full wire-speed forwarding rate.
•Alarms for power failure by relay output.
•Operating voltage and Max. current consumption: 1.7A @ 12VDC, 0.85A @ 24VDC.
Power consumption: 20.4W Max.
•Power supply: Redundant DC Terminal Block power inputs and 12VDC DC JACK with
100-240VAC external power supply.
•Field Wiring Terminal Markings: Use Copper Conductors Only, 60/75℃, wire range
12-24 AWG, torque value 7 lb-in.
•-20℃ to 60℃ (-4℉ to 140℉) operating temperature range. UL508 Industrial Control
Equipment certified Maximum Surrounding Air Temperature @ 60℃ (140℉).
•For use in Pollution Degree 2 Environment.
•Supports DIN-Rail and Panel Mounting installation.
Console Configuration
lConnect to the switch console:
Connect the DB9 straight cable to the RS-232 serial port of the device and the RS-232
serial port of the terminal or computer running the terminal emulation application.
Direct access to the administration console is achieved by directly connecting a
terminal or a PC equipped with a terminal-emulation program (such as HyperTerminal)
to the switch console port.
lConfiguration settings of the terminal-emulation program:
Baud rate: 115,200bps
Data bits: 8
Parity: none
Stop bit: 1
Flow control: none
lPress the “Enter” key. The Command Line Interface (CLI) screen should appear as below:
lLogon to Exec Mode (View Mode):
At the “switch_a login:” prompt just type in “root” and press <Enter> to logon to Exec
Mode (or View Mode). And the “switch_a>” prompt will show on the screen.

IES-0883 User Manual Page 7
lLogon to Privileged Exec Mode (Enable Mode):
At the “switch_a>” prompt just type in “enable” and press <Enter> to logon to
Privileged Exec Mode (or Enable Mode). And the “switch_a#” prompt will show on the
screen.
lLogon to Configure Mode (Configure Terminal Mode):
At the “switch_a#” prompt just type in “configure terminal” and press <Enter> to logon
to Configure Mode (or Configure Terminal Mode). And the “switch_a(config)#” prompt
will show on the screen.
lSet new IP address and subnet mask for Switch:
At the “switch_a(config)#” prompt just type in “interface vlan1.1” and press <Enter> to
logon to vlan 1 (vlan1.1 means vlan 1). And the “switch_a(config-if)#” prompt will show
on the screen.
Command Syntax: “ip address A.B.C.D/M”. “A.B.C.D” specifies IP address. “M” specifies IP
subnet mask. “M”= 8: 255.0.0.0, 16:255.255.0.0, or 24: 255.255.255.0.
For example, At the “switch_a(config-if)#” prompt just type in “ip address
192.168.1.10/24” and press <Enter> to set new IP address (192.168.1.10) and new IP
subnet mask (255.255.255.0) for Switch.

IES-0883 User Manual Page 8
Web Configuration
lLogin the switch:
Specify the default IP address (192.168.1.10) of the switch in the web browser. A login
window will be shown as below:
lEnter the factory default login ID: root.
Enter the factory default password (no password).
Then click on the “Login” button to log on to the switch.

IES-0883 User Manual Page 9
Product Overview
Industrial ManagedGigabit Ethernet Switch
Front and Top View
Package Contents
When you unpack the product package, you shall find the items listed below. Please
inspect the contents, and report any apparent damage or missing items immediately to
your authorized reseller.
•IES-0883
•Quick Installation Guide
•CD Users Manual
•RS232 cable

IES-0883 User Manual Page 10
Product Highlights
Basic Features
•Meets EN61000-6-2 & EN61000-6-4 EMC Generic Standard Immunity for industrial
environment.
•Manageable via SNMP, Web-based, Telnet, and RS-232 console port.
•Supports Command Line Interface in RS-232 console.
•Supports IEEE802.3/802.3u/802.3ab/802.3z/802.3x. Auto-negotiation:
10/100/1000Mbps, full/half-duplex. Auto MDI/MDIX.
•1000Base-SX/LX: Multi mode or Single mode SC type, 1000Base-BX: WDM Single mode
SC type.
•Supports 4096 MAC addresses. Provides 1M bits memory buffer.
•Store-and-forward mechanism.
•Full wire-speed forwarding rate.
•Alarms for power failure by relay output.
•Operating voltage and Max. current consumption: 1.7A @ 12VDC, 0.85A @ 24VDC.
Power consumption: 20.4W Max.
•Power supply: Redundant DC Terminal Block power inputs and 12VDC DC JACK with
100-240VAC external power supply.
•Field Wiring Terminal Markings: Use Copper Conductors Only, 60/75℃, wire range
12-24 AWG, torque value 7 lb-in.
•-20℃ to 60℃ (-4℉ to 140℉) operating temperature range. UL508 Industrial Control
Equipment certified Maximum Surrounding Air Temperature @ 60℃ (140℉).
•For use in Pollution Degree 2 Environment.
•Supports DIN-Rail and Panel Mounting installation.
Management Support
VLAN
lPort-based VLAN
lIEEE802.1Q tagged VLAN
TRUNKING
lMAC-based Trunking with automatic link fail-over
PORT-SECURITY
lPer-port programmable MAC address locking
lUp to 24 Static Secure MAC addresses per port
lIEEE802.1x Port-based Network Access Control

IES-0883 User Manual Page 11
PORT-MIRRORING
lPort-mirroring
QOS (IEEE802.1p Quality of Service)
l4 priority queues
INTERNETWORKING PROTOCOLS
lBridging:
IEEE802.1s Multiple Spanning Tree
IEEE802.1w Rapid Spanning Tree
IEEE802.1D Spanning Tree compatible
IEEE802.1Q – GVRP
lIP Multicast:
IGMP Snooping
lRate Control
lNTP
NETWORK MANAGEMENT METHODS
lConsole port access via RS-232 cable (CLI, Command Line Interface)
lTelnet remote access
lSNMP agent:
MIB-2 (RFC1213)
Bridge MIB (RFC1493)
RMON MIB (RFC2819) – statistics, history, alarm and events
VLAN MIB (IEEE802.1Q/RFC2674)
Private MIB
lWeb browser
lTFTP software-upgrade capability

IES-0883 User Manual Page 12
Front Panel Display
Power & Port Status LEDs
The LEDs are located on the front panel, displaying status for each respective
port. Please refer to the following table for more details.
Terminal Block
PW1 + 12 – 32VDC
–
Power Ground
PW2 + 12 – 32VDC
– Power Ground
Earth Ground
Relay Output 1A @ 24VDC
Relay Alarm warning signal disable for following:
3. The relay contact closes if Power1 and Power2 are both failed but Power3 on
4. The relay contact closes if Power3 is failed but Power1 and Power2 are both on
•There are three power inputs can be used. Redundant power function is supported
PW3 is DC Jack type with 12VDC input

IES-0883 User Manual Page 13
LED Status
LED
Status
Description
PW 1,2,3 Steady Power On
Off Power Off
10/100/1000Base-TX & 1000Base-FX
LNK/ACT Steady Network connection established
Flashing Transmitting or Receiving data
100
Amber Connection at 1000Mbps speed
Green Connection at 100Mbps speed
Off Connection at 10Mbps speed
Alarm
Alarm
Steady State the power redundancy failure has
being addressed
Off State the power redundancy failure has
not being addressed

IES-0883 User Manual Page 14
Physical Ports
The Industrial Managed Gigabit Ethernet Switch provides:
8-port Industrial Managed Gigabit Ethernet Switch
CONNECTIVITY
•RJ-45 connectors on TX ports
•SC connector on 1000Base-SX/LX/BX fiber port
MODE SELECTION
•10Base-T full-duplex mode
•10Base-T half-duplex mode
•100Base-TX full-duplex mode
•100Base-TX half-duplex mode
•1000Base-T/SX/LX/BX full-duplex mode
•Auto-negotiating mode

IES-0883 User Manual Page 15
Switch Management
Web-based browser interface
The switch also boasts a point-and-click browser-based interface that lets user access full
switch configuration and functionality from a Netscape or Internet Explorer browser.
Administration console via RS-232 serial port (CLI)
The switch provides an onboard serial port, which allows the switch to be configured via a
directly connected terminal.
External SNMP-based network management application
The switch can also be configured via SNMP.

IES-0883 User Manual Page 16
Installation
This chapter gives step-by-step instructions about how to install the switch:
Selecting a Site for the Switch
As with any electric device, you should place the switch where it will not be subjected to
extreme temperatures, humidity, or electromagnetic interference. Specifically, the site you
select should meet the following requirements:
-The ambient temperature should be between -20°C to 60℃ (-4℉ to 140℉).
-The relative humidity should be less than 95 percent, non-condensing.
-Surrounding electrical devices should not exceed the electromagnetic field (RFC)
standards.
-Make sure that the switch receives adequate ventilation. Do not block the ventilation
holes on each side of the switch.
Wiring Diagram
Field Wiring Terminal Markings: Use Copper Conductors Only, 60/75℃, wire range 12-24
AWG, torque value 7 lb-in.

IES-0883 User Manual Page 17
DIN Rail Mounting
Fix the DIN rail attachment plate to the back panel of the Industrial Managed Ethernet
Extender.
Installation: Place the Industrial Managed Ethernet Extender on the DIN rail from above
using the slot. Push the front of the Industrial Managed Ethernet Extender toward the
mounting surface until it audibly snaps into place.
Removal: Pull out the lower edge and then remove the Industrial Managed Ethernet
Extender from the DIN rail.

IES-0883 User Manual Page 18
Connecting to Power
Redundant DC Terminal Block Power Inputs or 12VDC DC Jack:
12VDC DC Jack
Step 1: Connect the supplied AC to DC power adapter to the receptacle on the topside of
the switch.
Step 2: Connect the power cord to the AC to DC power adapter and attach the plug into a
standard AC outlet with the appropriate AC voltage.
Redundant DCTerminal Block Power Inputs
There are two pairs of power inputs for use with redundant power sources. You only need
to have one power input connected to run the switch.
Step 1: Connect the DC power cord to the plug-able terminal block on the switch, and
then plug it into a standard DC outlet.
Step 2: Disconnect the power cord if you want to shut down the switch.
Top View

IES-0883 User Manual Page 19
Alarms for Power Failure
Step 1: There are two pins on the terminal block used for power failure detection. It
provides the normally closed output when the power source is active. Use this as a
dry contact application to send a signal for power failure detection.
Terminal Block
PW1 + 12 – 32VDC
–
Power Ground
PW2 + 12 – 32VDC
– Power Ground
Earth Ground
Relay Output 1A @ 24VDC
Relay Alarm warning signal disable for following:
5. The relay contact closes if Power1 and Power2 are both failed but Power3 on
6. The relay contact closes if Power3 is failed but Power1 and Power2 are both on
Special note:
The relay output is normal open position when there is no power to the switch.
Please do not connect any power source to this terminal to prevent shorting your
power supply.