Lexar LDP-600 Use and care manual

To Update the firmware:
1. Unzip the file to a location on their hard drive.
2. Connect LDP-600
3. Drag and drop the file ldp600.rom to the Home directory of their LDP-600. Make sure that they
copy it to the root.
4. Once the file is copied, disconnect the LDP-600.
5. Power o5. Power off and power on the LDP-600.
6. Upon powerup, the LDP-600 will automatically start updating the firmware.
_______________________________________________________________________
Based on user feedback, we have enhanced the features and capabilities of the LDP-600 in the
1.07 update:
These enhancements include:
1. Resume from SD card is now enabled.1. Resume from SD card is now enabled.
2. Autochange to SD mode is enabled. If you insert a SD card into the SD card slot, the LDP 600
will automatically switchover to the SD card.
3. Bookmark on SD card is enabled.
4. Fixes intermittent performance issues.