Lexicon MPX 110 - REV 1 User manual

CE COMPLIANCE INFORMATION (FOR EUROPEAN MARKET)
EMC Directive 89/336/EEC and Amendment 92/31/EEC, Class B Digital Device.
EN 50081-1, Generic Emissions Standard for Residential, Commercial and Light Industrial Products.
(EN 55022/CISPR 22, Limits and Methods of Measurement of Radio Interference Characteristics Information Technology Equipment.) Warning: This is a Class B
product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
EN 50082-1, Generic Immunity Standard for Residential, Commerical and Light Industrial Products.
(IEC 801-2, IEC 801-3, IEC 801-4)
Directive EMC 89/336/CEE et amendement 92/31/CEE, dispositif numérique de Classe B.
EN 50081-1, Norme sur les émissions génériques pour les produits domestiques, commerciaux et industriels légers.
(EN 55022/CISPR 22, Limites et méthodes de mesure des caractéristiques d’interférences radiophoniques, Matériel des technologies de l’information.) Mise en
garde: ceci est un produit de Classe B. Il risque produire des interférences radiophoniques dans un environnement domestique auquel cas l’utilisateur peut se
voir demandé de prendre des mesures adéquates.
EN 50082-1, Norme sur l’immunité générique pour produits domestiques, commerciaux et industriels légers.
(CEI 801-2, CEI 801-3, CEI 801-4)
EMC Richtlinie 89/336/EEC und Änderung 92/31/EEC, Digitales Gerät der Klasse B.
EN 50081-1, Allgemeiner Emissions - Standard für Haushalt - und kommerzielle Produkte sowie Erzeugnisse der Leichtindustrie.
(EN 55022/CISPR 22, Beschränkungen und Verfahren der Messung von informationstechnischen Ausrüstungen mit Funkstörmerkmalen.)
Warnung: Dies ist ein Erzeugnis der Klasse B. Dieses Erzeugnis kann Funkstörungen im Wohnbereich verursachen; in diesem Fall können entsprechende
Maßnahmen seitens des Benutzers erforderlich sein.
EN 50082-1, Allgemeiner Unempfindlichkeits - Standard fur Haushalt - und kommerzielle Produkte sowie Erzeugnisse der Leichtindustrie.
(IEC 801-2, IEC 801-3, IEC 801-4)

© 2002 Lexicon, Inc. All rights reserved.
This document should not be construed as a commitment on the part of Lexicon, Inc. The information it contains is subject to change
without notice. Lexicon, Inc. assumes no responsibility for errors that may appear within this document.
A Harman International Company
Lexicon, Inc.
3 Oak Park
Bedford, MA 01730-1441 USA
Tel [phone]
Fax [phone]
www.lexicon.com
Customer Support
Tel [phone]
Fax [phone] (Sales)
Fax [phone] (Service)
Lexicon Part No. 070-14956 | Rev 1 | 02/02
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
1. Re-orient the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected,.
4. Consult the dealer or an experienced radio/TV technician for help.
• The use of shielded cables for connection of the monitor to the graphics card is required to ensure compliance with FCC regulations.
• Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate
this equipment.

Introduction Lexicon
ii
Introduction
Important User Information. . . . . . . . . . . . . . iv
Wichtige Benutzerinformation . . . . . . . . . . . . v
Información importante para el usuario . . . . . vi
Important - Informations Utilisateur . . . . . . . vii
Importanti informazioni per l’utente. . . . . . . viii
Informações Importantes ao usuário . . . . . . . ix
Section 1: Getting Started
About the MPX 110 . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Highlights
Front Panel Overview . . . . . . . . . . . . . . . . . . . . . . . 1-4
Rear Panel Overview . . . . . . . . . . . . . . . . . . . . . . . 1-6
Connecting the Unit . . . . . . . . . . . . . . . . . . . . . . . 1-8
Headphones • Footswitch
Setting Audio Levels. . . . . . . . . . . . . . . . . . . . . . . 1-10
Reinitialization . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11
Section 2: Basic Operation
Adjust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Selecting Programs . . . . . . . . . . . . . . . . . . . . . . . . 2-2
SINGLE Programs • DUAL Programs • User Programs
Editing Programs . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
Storing Programs . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
Tap Tempo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
Varying Rhythm • Audio Tap • Global Tempo
Bypass. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6
FR
IT
PT
ES
DE
US

Introduction
MPX 110
iii
Section 3: System Mode
Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
System Mode Parameters & Functions . . . . . . . . . . 3-3
Section 4: Program Descriptions
SINGLE Programs. . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Plate • Gate • Hall • Chamber • Ambience • Room • Tremolo •
Rotary • Chorus • Flange • Pitch • Detune • Delay, Echo
Special FX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18
DUAL Programs . . . . . . . . . . . . . . . . . . . . . . . . . . 4-20
Effects Lvl/Bal • Flange-Delay • Pitch-Delay • Chorus-Delay •
Delay-Reverb • Flange-Reverb • Pitch-Reverb • Chorus-Reverb
The Pitch Programs . . . . . . . . . . . . . . . . . . . . . . . 4-36
User Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-38
Section 5: MIDI Operation
Learn Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Program Load Channel. . . . . . . . . . . . . . . . . . . . . . 5-3
Program Change Messages . . . . . . . . . . . . . . . . . . 5-4
Loading Programs • Activating Bypass or Tap Functions
Learning Continuous Controllers. . . . . . . . . . . . . . . 5-6
Section 5: MIDI Operation (continued)
Clearing Learned Assignments . . . . . . . . . . . . . . . . 5-7
MIDI Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8
MIDI Dumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8
MIDI Sysex Messages . . . . . . . . . . . . . . . . . . . . . . . 5-9
Permanent Patches . . . . . . . . . . . . . . . . . . . . . . . . 5-9
MIDI Implementation Chart . . . . . . . . . . . . . . . . . 5-12
Appendix
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2
Declaration of Conformity . . . . . . . . . . . . . . . . . . . A-3
Index

Introduction Lexicon
iv
Important User Information
Lexicon is pleased to present its user guides on CD-ROM.
By utilizing CD-ROM technology we are able to provide
our documentation in multiple languages.
The printed edition of the user guide is in English only.
The enclosed CD-ROM includes the user guide in
multiple languages (French, German, Italian, Portuguese,
and Spanish) in easy-to-use PDF format. The CD-ROM
also includes Adobe® Acrobat® Readers for both PC and
Macintosh platforms, enabling printing of all or any part
of the documents. In addition, we have included dry
audio tracks for product demonstrations. (Track 1
contains non-audio data.)
Please take a moment to read through the important
safety information. For additional information about
Lexicon, Inc., our products and support, please visit our
web site at www.lexicon.com.
Unpacking and Inspection
After unpacking the unit, save all packing materials in
case the unit ever needs to be shipped. Thoroughly
inspect the modules and packing materials for signs of
damage. Report any damage to the carrier at once;
report equipment malfunction to the dealer.
US

Introduction
MPX 110
v
Wichtige Benutzerinformation
Lexicon ist erfreut, seine Benutzerhandbücher nun auch
auf CD-ROM vorlegen zu können. Durch den Einsatz von
CD-ROM-Technologie können wir unsere Dokumentation
in verschiedenen Sprachen zur Verfügung stellen.
Die gedruckte Ausgabe des Benutzerhandbuchs ist nur in
englischer Sprache verfügbar. Die beigelegte CD-ROM
enthält das Benutzerhandbuch in verschiedenen
Sprachen (spanisch, französisch, italienisch, deutsch und
portugiesisch) im leicht zu benutzenden PDF-Format.
Die CD-ROM enthält auch Adobe® Acrobat® Reader
sowohl für PC wie auch für Macintosh; mit ihm ist es
möglich, das gesamte Dokument oder Teile davon
auszudrucken. Darüber hinaus befinden sich auf der
CD-ROM Audio-Tracks zur Produktdemonstration.
(Track 1 enthält keine Audio-Daten.)
Nehmen Sie sich bitte einen Augenblick Zeit und lesen
Sie die wichtigen Sicherheitshinweise. Weitere
Informationen über Lexicon, Inc., sowie über unsere
Produkte und unseren Support finden Sie auf unserem
Website unter www.lexicon.com.
Auspacken und Überprüfung
Bewahren Sie nach dem Auspacken des Geräts das
Verpackungsmaterial für den Fall auf, dass Sie das Gerät
wieder versenden müssen. Überprüfen Sie die Module
und die Verpackung sorgfältig auf Anzeichen von
Beschädigung. Etwaige Schäden sind dem Transporteur
unverzüglich anzuzeigen; Funktionsstörungen sind dem
zuständigen Händler zu melden.
DE

Introduction Lexicon
vi
Información importante para el
usuario
Lexicon se complace en presentar sus manuales de
usuario en CD-ROM. Gracias a la utilización de la
tecnología de CD-ROM, nosotros podemos ofrecer nues-
tra documentación en múltiples idiomas.
La edición impresa del manual del usuario sólo está
disponible en inglés. El CD-ROM que se entrega incluye
el manual del usuario en múltiples idiomas (español,
francés, italiano, alemán y portugués) en formato PDF. El
CD-ROM también incluye Adobe® Acrobat® Readers
para plataformas tanto PC como Macintosh, lo cual
permite la impresión de todos o parte de los
documentos. Además, hemos incluido pistas de audio
sin efectos para demostraciones de los productos. (La
pista 1 contiene información que no es de audio.)
Dedique unos momentos a leer la información de
seguridad importante. Si desea información adicional
acerca de Lexicon, Inc., nuestros productos o nuestra
asistencia, visite nuestro sitio web en www.lexicon.com.
Desembalaje e inspección
Después de desembalar la unidad, guarde todos los
materiales de embalaje por si alguna vez transportar la
unidad. Inspeccione con atención los módulos y los
materiales de embalaje para comprobar que no
muestren desperfectos. Informe inmediatamente de
cualquier desperfecto al transportista; informe de
cualquier problema de funcionamiento del equipo a su
distribuidor.
ES

Introduction
MPX 110
vii
Important - Informations Utilisateur
Nous sommes fiers de présenter nos modes d’emploi en
version CD-ROM. L’utilisation des CD-ROM nous
per-mettent de décliner nos manuels en plusieurs
langues.
La version imprimée de ce manuel existe uniquement en
anglais. Le CD-ROM regroupe les versions espagnole,
française, italienne, allemande et portugaise au format
PDF. Le CD-ROM comprend également Adobe®
Acrobat® Reader pour PC et Macintosh, ce qui vous
permet d’imprimer les documents en toute ou partie. De
plus, nous avons ajouté des pistes audio sans traitement
pour la démonstration du produit (la piste 1 contient des
données non audio).
Prenez le temps de lire les informations relatives à la
sécurité. Pour obtenir de plus amples informations sur
Lexicon, Inc., nos produits et notre service clientèle,
consultez notre site web à l’adresse : www.lexicon.com.
Contenu de l’emballage et inspection
Après avoir ouvert l’emballage, conservez-le pour tout
retour. Inspectez avec soin les modules et les matériaux
d’emballage pour tout signe de dommage. Veuillez
rapporter immédiatement les dommages auprès du
transporteur. Les dysfonctionnements du matériel
doivent être signalés à votre revendeur.
FR

Introduction Lexicon
viii
Importanti informazioni per l’utente
Lexicon è lieta di presentare i propri manuali su CD-
ROM. Utilizzando la tecnologia su CD-ROM siamo stati
capaci offrire la nostra documentazione in più lingue.
L’edizione stampata del manuale è solamente in inglese.
Il CD-ROM contiene il manuale in diverse lingue
(Spagnolo, Francese, Italiano, Tedesco, e Portoghese)in
formato PDF, facile da utilizzare. Il CD-ROM include
anche Adobe‚, Acrobat‚ Reader per PC e per Macintosh,
rendendo possibile la stampa di tutta la
documentazione. Inoltre Sono incluse tracce audio per
dimostrazioni del prodotto. (La Traccia 1 contiene dati
non audio).
Si prega di prendere un momento per leggere le
importanti norme di sicurezza. Per ulteriori informazioni
riguardo Lexicon, Inc., i nostri prodotti e la nostra
assistenza, visiti il nostro sito internet www.lexicon.com.
Disimballaggio ed ispezione
Dopo aver disimballato l’unità, salvi tutto il materiale
d’imballaggio, in caso Lei abbia bisogno di spedire
l’unità. Ispezioni attentamente i moduli ed il materiale
d’imballaggio per vedere se riportano segni di danno.
Riporti subito ogni segno di danno al corriere; riferisca il
malfunzionamento dell’attrezzatura al suo rivenditore.
IT

Introduction
MPX 110
ix
Informações Importantes ao usuário
A Lexicon tem o prazer de apresentar o Guia do Usuário
em CD-ROM. Através da tecnologia CD-ROM temos a
possibilidade de fornecer nossa documentação em vários
idiomas.
A versão impressa do Guia do Usuário está apenas em
Inglês. O CD-ROM contém o Guia do Usuário em vários
idiomas (Espanhol, Francês, Italiano, Alemão e
Português) em formato PDF. Também inclui o aplicativo
Adobe Acrobat Reader para as plataformas Macintosh e
PC, possibilitanto a impressão de qualquer parte da
documentação. Além disso, incluimos faixas no CD com
áudio sem processamento para a demosntração dos
produtos. (A faixa 1 do CD não contém informação de
áudio.)
Por favor separe uns instantes para ler as informações
sobre segurança. Elas são muito importantes. Para
informações adicionais sobre a Lexicon, Inc., nossos
produtos e suporte, acesse nosso web site em
www.lexicon.com.
Retirando a embalagem e Inspecionando
Depois de desembalar a unidade, guarde a embalagem
caso precise enviar a unidade para manutenção.
Inspecione cuidadosamente o módulo e a embalagem
procurando sinais de dano. Avise à loja qualquer tipo de
dano ou mal funcionamento do equipamento.
PT

Getting Started
1
About the MPX 110.........................................................................1-2
Highlights
Front Panel Overview ......................................................................1-4
Rear Panel Overview ........................................................................1-6
Connecting the Unit........................................................................1-8
Headphones • Footswitch
Setting Audio Levels ......................................................................1-10
Reinitialization ...............................................................................1-11

Getting Started Lexicon
1-2
ABOUT THE MPX 110
Thank you for purchasing the MPX 110 Dual Channel
Processor, featuring Lexicon’s proprietary Lexichip®.
The MPX 110 is a true stereo, dual-channel processor
with 24-bit internal processing, analog-to-digital
conversion, and digital-to-analog conversion. It offers
240 presets with classic Lexicon reverbs, including Plate,
Chamber, Ambience, Tremolo, Rotary, Chorus, Flange,
Pitch, Detune, 5.7 second Delay, Echo, and Inverse.
Dual-channel processing creates two independent
effects in combinations such as Dual Stereo (Parallel),
Cascade, Mono Split, and Dual Mono.
The front panel Adjust knob allows instant manipulation
of critical preset parameters, and the Effects Lvl/Bal knob
controls effect level in SINGLE programs or effect
balance in DUAL programs. All programs can be selected
with the PROGRAM and VARIATION knobs. The
PROGRAM knob selects SINGLE, DUAL, or User
programs, while the VARIATION knob selects among 16
program variations.
Tap Tempo simplifies the once-complicated process of
matching delay times and modulation rates between
tempo-based presets and other music. Tempo-controlled
delays and modulation rates lock to Tap or MIDI clock. In
addition, Tap can be controlled using audio input, a dual
footswitch, the front panel Tap button, or an external
MIDI controller using MIDI Continuous Controller or
Program Change messages.
The MPX 110 features Learn Mode, a powerful editing
tool that allows MIDI patching of five front panel
controls. Standard Continuous Controller and Program
Change messages provide complete control over Bypass,
Effects Lvl/Bal, Mix, Tap, and even Adjust.

Getting Started
MPX 110
1-3
HIGHLIGHTS
• Lexicon’s proprietary Lexichip
• World-class Lexicon reverb
• 24-bit internal processing
• 24-bit analog-to-digital and digital-to-analog
conversion
• 240 presets
• 16 User programs
• 44.1K S/PDIF output
• Simultaneous analog and digital outputs
• Independent processing of each input
• DUAL programs that create two independent effects
with four routing configurations
• Dual effects that combine Delay with Reverb, or
either Delay or Reverb with Chorus, Flange, or Pitch
• Multiple delay, modulation, and pitch effects
• Tap Tempo
• Full MIDI control
• High-impedance inputs for instruments
• Two-stage headroom indicators
• Headphone output
• Software-selectable MIDI OUT/THRU port
• Push-button or footswitch selection of dry or muted
audio output
• 20Hz-20kHz±1dB frequency response

Getting Started Lexicon
1-4
1. Clip and Level LEDs
Indicate incoming signal levels. The Level LEDs do
not light when the incoming signal is more than
30dB below overload. The Clip LEDs light red when
the signal approaches overload (-2.5dB). When a
signal level is acceptable, the Level LEDs light green
almost continuously and the Clip LEDs flash red on
the loudest passages. See page 1-10 for more
information about setting audio levels.
2. Input
Sets the level of the incoming signal. The Clip and
Level LEDs indicate acceptable signal levels.
3. Mix
Controls the ratio of processed (Wet) to unprocessed
(Dry) audio signals.
FRONT PANEL OVERVIEW
1 2
3 5 7 9 10
4 6 8 11 12

Getting Started
MPX 110
1-5
4. Output
Sets analog output levels.
5. Effects Lvl/Bal
Sets effect level in SINGLE programs or effect
balance in DUAL programs.
6. Edit LED
Lights to indicate that a program has been modified
but not stored, and flashes to indicate MIDI activity.
(See page 2-4 for more information about editing
programs.)
7. Adjust
Controls the most relevant parameters for the
selected program variation.
8. Bypass
Mutes or bypasses the incoming signal, depending
on the setting of the System Mode parameter
Bypass. Press and hold for 2 seconds to access
System Mode parameters.
9. VARIATION
Selects program variations when the PROGRAM
knob is set to a SINGLE or DUAL program. Selects
memory locations for storing User programs when
the PROGRAM knob is set to User.
10. PROGRAM
Selects SINGLE, DUAL, or User programs.
11. Store
Activates the store function for User programs. When
pressed with Tap, activates MIDI Learn Mode.
12. Tap
Flashes to indicate that a tempo-based program is
selected. When pressed twice, sets tempo. When
pressed and held, uses input level to determine
tempo. When pressed with Store, activates MIDI
Learn Mode.

Getting Started Lexicon
1-6
1. POWER
Supplies power to the unit. Utilizes a Lexicon 1.9A,
9VAC power pack.
2. FOOTSWITCH
Allows footswitch control of front panel Bypass and
Tap functions. A 1/4 inch Tip/Ring/Sleeve connector
for a momentary contact footswitch is available.
REAR PANEL OVERVIEW
1 3
2 4
5 6
Tip
Ring
Sleeve
Tip Sleeve
Ring
Tap
Bypass

Getting Started
MPX 110
1-7
3. MIDI IN, OUT/THRU
Provide MIDI operation capabilities. Two 5-pin DIN
MIDI connectors are available for MIDI IN and
software-selectable MIDI OUT/THRU.
4. S/PDIF OUT
Provides digital audio output. One RCA coaxial
S/PDIF connector is available.
5. ANALOG OUTPUTs
Provide analog audio output. Two unbalanced,
single-ended stereo output connectors are available.
Both offer typical output levels of +8dBu. Use the
RIGHT (MONO) OUTPUT for mono output. If no
connection is made to the RIGHT (MONO) OUTPUT,
the LEFT (PHONES) OUTPUT can be used to drive
headphones at a modest volume.
6. ANALOG INPUTs
Provide analog audio input. Two unbalanced,
single-ended stereo input connectors are available.
Both accept levels as low as -30dBu. Input
impedance is 500kΩ. These can be used as direct
inputs for guitars. Use the RIGHT (MONO) INPUT for
mono sources.

Dual-Function Footswitch
A dual-function footswitch with
labels to indicate Tap and Bypass
functions is available at Lexicon
dealers or www.lexicon.com.
BYPASS TAP
Getting Started Lexicon
1-8
CONNECTING THE UNIT
The INPUT and OUTPUT connectors on the MPX 110 are
1/4 inch unbalanced sockets. Connections should be
made utilizing high-quality shielded cables with 1/4 inch
Tip/Sleeve phone plugs at the end connected to the unit.
The unit produces effects from either mono or stereo
sources. For mono sources, use the RIGHT (MONO)
INPUT. For instruments and stereo sources, use both
inputs. It is recommended to use stereo outputs
whenever stereo inputs are used. Use the RIGHT
(MONO) OUTPUT if mono output is required. The left
and right input signals are combined internally when
only the RIGHT (MONO) OUTPUT is used.
HEADPHONES
The LEFT (PHONES) OUTPUT supplies a stereo signal
adequate to drive headphones, provided no connections
are made at the RIGHT (MONO) OUTPUT. This feature is
included for convenience and practice purposes. It is
intended to provide modest volume.
FOOTSWITCH
A footswitch connected to the rear panel FOOTSWITCH
connector can be used to control front panel Tap and
Bypass functions. A momentary footswitch can be wired
to a Tip/Ring/Sleeve connector or a stereo Y-connector,
which allows two identical switches to be used.
Note:
Power off the unit prior to connecting the
footswitch. Otherwise, Bypass functions will be
enabled.

Ch7 Ch8
Aux
Send 1
Aux
Send 2
RIGHT OutLEFT Out
RIGHT InLEFT In
Getting Started
MPX 110
1-9
The MPX 110 can be used as two independent effects
processors with DUAL program variations 11 to 16.
Designate two auxiliary sends on the console. Connect
these to the unit - one to the LEFT INPUT and the other
to the RIGHT (MONO) INPUT. See Section 4 to take
advantage of this configuration.
Right
(Mono)
Output
Left
Output
Amplifier &
Stereo Speaker
Cabinet
MPX 110
to MPX 110 RIGHT
(MONO) INPUT
SB 210
010
56
7
8
9
1
3
2
4
010
56
7
8
9
1
3
2
4
010
56
7
8
9
1
3
2
4
010
56
7
8
9
1
3
2
4
010
56
7
8
9
1
3
2
4
010
56
7
8
9
1
3
2
4
010
56
7
8
9
1
3
2
4
Midrange Treble
Right
Volume
Left
Volume
BassGain
(PullforBoost)
Presence
Input
Standby
OnOn
Power
AllTube Class "A" Stereo Recording Amplifier and Direct Source
DesignedbyJohn McIntyre
SB 210
010
56
7
8
9
1
3
2
4
010
56
7
8
9
1
3
2
4
010
56
7
8
9
1
3
2
4
010
56
7
8
9
1
3
2
4
010
56
7
8
9
1
3
2
4
010
56
7
8
9
1
3
2
4
010
56
7
8
9
1
3
2
4
Midrange Treble
Right
Volume
Left
Volume
BassGain
(PullforBoost)
Presence
Input
Standby
OnOn
Power
AllTube Class "A" Stereo Recording Amplifier and Direct Source
DesignedbyJohn McIntyre
Connecting to a Mono Guitar Input with Mono or
Stereo Amplifiers
Connecting to a Balanced Console
Connecting to a Dual Processor Setup with a
Console
Ring
MPX 110
Output
Mixer Input
Tip Sleeve
Mixer
Send
MPX 110 Input
Tip 1
2
3
Sleeve
1
2
3
Tip
Sleeve