Lexmark 1200 - Optra Color LED Printer User manual

SUPPLIES MENU
<color> Toner
<color> PC Drum
Tray 1 Status
Tray 2 Status
Tray
3 Status
PAPER MENU
Paper Source
PAPER SIZE
PAPER TYPE
CUSTOM TYPES
Output Bin
Substitute Size
Configure MP
Size Detection
FINISHING MENU
Copies
Blank Pages
Collation
Separator Sheets
Separator Source
Multipage Print
Multipage Order
Multipage View
Multipage Border
MAINTENANCE MENU
Maint Status COLOR MENU
Color Correction
Print Quality
Toner Saver
SERIAL MENU
SERIAL OPTION 1
SERIAL OPTION 2
PCL SmartSwitch
PS SmartSwitch
NPA Mode
Serial Buffer
Job Buffering
RS-232/RS-422
RS-422 Polarity
Serial Protocol
Robust XON
Baud
Data Bits
Parity
Honor DSR
NETWORK MENU
NETWORK OPTION 1
NETWORK OPTION 2
PCL SmartSwitch
PS SmartSwitch
NPA Mode
Network Buffer
Job Buffering
NETWORK x SETUP
FAX MENU
Fax Port
Fax Baud
Fax Data Bits
Fax Parity
Fax Buffer
TESTS MENU
Print Menus
Print Fonts
Print Directory
Print Demo
Color Samples
Factory Defaults
Format Flash
Format Disk
Job Acct Stat
Hex Trace
JOB MENU
Cancel Job
Reset Printer
Print Buffer
POSTSCRIPT MENU
Print PS Error
Font Priority
Image Smoothing
PARALLEL MENU
STD PARALLEL
PARALLEL OPT 1
PARALLEL OPT 2
PCL SmartSwitch
PS SmartSwitch
NPA Mode
Parallel Buffer
Job Buffering
Advanced Status
Protocol
Honor Init
Parallel Mode 1
Parallel Mode 2
INFRARED MENU
Infrared Port
PCL SmartSwitch
PS SmartSwitch
NPA Mode
Infrared Buffer
Job Buffering
Window Size
Transmit Delay
Max Baud Rate
LOCALTALK MENU
LocalTalk Port
PCL SmartSwitch
PS SmartSwitch
NPA Mode
LocalTalk Buffer
Job Buffering
NPA Hosts
LocalTalk Name
LocalTalk Addr
LocalTalk Zone
SETUP MENU
Printer Language
Power Saver
Resource Save
Download Target
Print Timeout
Wait Timeout
Auto Continue
Jam Recovery
Page Protect
Print Area
Display Language
Alarm Control
Printer Usage
Timing Adj
Job Buffer Size
Job Accounting
Job Acct Limit
Operator Panel
Press <Menu> to:
• Enter the menus from the ready state
• Scroll through menus or values
• Increase or decrease a numerical value
• Display the Job Menu or the Supplies Menu while the printer
is busy
Press Select to:
• Select the item on the second line of the display
• Save the selection as a new default setting
Press Return to:
• Back up to the previous menu level
Press Stop to:
• Temporarily stop all print activity without losing data
Press Go to:
• Exit printer menus and return to the ready state
• Clear messages
Menu Select Return
Go Stop
PCL EMUL MENU
Font Source
Font Name
Point Size
Pitch
Symbol Set
Orientation
Lines per Page
A4 Width
TRAY RENUMBER
Auto CR after LF
Auto LF after CR
Note: Menu items in italics appear on the display only if a required option is installed.
Capitalized menu items (for example, PAPER SIZE) have submenus.
Overview of Printer Menus

Quick Reference
Lexmark Optra Color 1200
© Copyright Lexmark International, Inc. All rights reserved. Printed in U.S.A.
This document is printed on recycled paper. 3/98
Loading Paper
1Important! Move the rear guide to the proper position for
the paper size.
2Load paper face down. Make sure the paper fits under the
corner tabs.
3Adjust width guides.
A4, A5, B5, and Letter
B4, A3, Legal, and 11x17
Maximum stack height
Corner tab
Short edge
Long edge
Maximum stack height
Corner tab
Loading Transparencies
Important! Use only Lexmark transparencies,
P/N 12A0540 (letter) or P/N 12A0541 (A4).
Tray 1
Multipurpose Feeder
Clearing Paper Jams
1Open the top cover all the way and remove the print units.
2Gently remove jammed paper from inside the printer.
3Check for jammed paper in the paper tray and paper tray
opening.
4Press the large green tab on each print unit and reinstall the
print units.
5Close the top and rear covers and press Go.
Notch
Notch
Cardboard sheet
with cutout
Transparencies
Rear guide
Rear guide
E.C. 1C0105 P/N 11F0847