Lexmark MS810 Series User manual

Menu Map
Menus list
Paper Menu Reports Network/Ports
Default Source
Paper Size/Type
Configure MP
Substitute Size
Paper Texture
Paper Weight
Paper Loading
Custom Types
Custom Names 3
Custom Bin Names 3
Universal Setup
Bin Setup
Menu Settings Page
Device Statistics
Stapler Test
Network Setup Page 1
Profiles List
Print Fonts
Print Directory
Asset Report
Active NIC
Standard Network 2
Standard USB
Parallel [x]
Serial [x]
SMTP Setup
Security Settings Help
Edit Security Setups 4
Miscellaneous Security Settings 3
Confidential Print
Disk Wiping
Security Audit Log
Set Date and Time
General Settings
Flash Drive Menu
Print Settings
Print All Guides
Print Quality
Printing Guide
Print Defects Guide
Information Guide
Supplies Guide
1Depending on the printer setup, this menu item appears as Network Setup Page or Network [x] Setup Page.
2Depending on the printer setup, this menu item appears as Standard Network or Network [x].
3This menu appears only in touch‑screen printer models.
4This menu appears only in select touch‑screen printer models.
Menu Map
Page 1 of 3

Using the printer control panel
Use the To
1Display •View the printer status.
•Set up and operate the printer.
2Select button Submit changes made in the printer settings.
3Arrow buttons Scroll up and down or left and right.
4Keypad Enter numbers, letters, or symbols.
5Sleep button Enable Sleep mode or Hibernate mode.
Do the following to wake the printer from Sleep mode:
•Press any hard button.
•Pull out Tray 1 or load paper in the multipurpose feeder.
•Open a door or cover.
•Send a print job from the computer.
•Perform a power‑on reset with the main power switch.
•Attach a device to the USB port on the printer.
6Stop or Cancel button Stop all printer activity.
7Back button Return to the previous screen.
8Home button Go to the home screen.
9Indicator light Check the status of the printer.
10 USB port Connect a flash drive to the printer.
Note: Only the front USB port supports flash drives.
Understanding the colors of the indicator and Sleep button lights
The colors of the indicator and Sleep button lights on the printer control panel signify a certain printer status or condition.
Indicator light color and its corresponding printer status
Indicator light Printer status
Off The printer is off or in Hibernate mode.
Blinking green The printer is warming up, processing data, or printing.
Menu Map
Page 2 of 3

Indicator light Printer status
Solid green The printer is on, but idle.
Blinking red The printer requires user intervention.
Sleep button light color and its corresponding printer status
Sleep button light Printer status
Off The printer is idle or in Ready state.
Solid amber The printer is in Sleep mode.
Blinking amber The printer is waking from or entering Hibernate mode.
Blinking amber for 0.1 second, then goes
completely off for 1.9 seconds in pulsing pattern
The printer is in Hibernate mode.
Menu Map
Page 3 of 3