LF allen + roth 1005PT User manual

Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-866-439-9800, 8 a.m. - 8 p.m., EST, Monday - Friday.
ITEM #0160126
Français p.6
MODEL #1005PT
ATTACH YOUR RECEIPT HERE
Serial Number Purchase Date
1
Español p.11
allen + roth® is a registered trademark
of LF, LLC. All Rights Reserved.
3 PC NESTING TABLE SET
XXXXXX Lowes.com/allenandroth

PACKAGE CONTENTS
2
A
B
C
PART DESCRIPTION QUANTITY
A Scallop Table Top 1
B Round Table Top 1
C Square Table Top 1
PART DESCRIPTION QUANTITY
E
D Large Leg
Medium Leg
Small Leg
F
4
4
4
D
D
D
D
E
E
E
E
F
F
F
F
Lowes.com/allenandroth

AA
Nut
Qty. 24
HARDWARE CONTENTS (shown actual size)
3
BB CC DD
WARNING
• Do not allow children to climb on this product.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or
install the product.
• Assemble the parts on a soft, non-abrasive surface, such as carpeting, to avoid
scratching the finish.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware ccontents list. If any part is missing or damaged, do not
attempt to assemble the product.
Estimated Assembly Time: 45 minutes
Tools Required for Assembly (included): Hex Wrench
Flat
Washer
Qty. 24
Lock
Washer
Qty. 24
Hex
Wrench
Qty. 1
Lowes.com/allenandroth

1. Attach large legs (D) to scallop table top (A)
using two nuts (AA), two flat washers (BB)
and two lock washers (CC). Tighten with
hex wrench (DD). Do not overtighten to
avoid cracking the wood.
Hardware Used
4
AA Nut x 8
BB x 8
Flat Washer
CC x 8
Lock Washer
ASSEMBLY INSTRUCTIONS
1
AA
AA
AA
CC
CC
BB
BB
CC BB
DD x 1
Hex Wrench
2. Attach medium legs (E) to round table top (B)
using two nuts (AA), two flat washers (BB)
and two lock washers (CC). Tighten with
hex wrench (DD). Do not overtighten to
avoid cracking the wood.
Hardware Used
AA Nut x 8
BB x 8
Flat Washer
CC x 8
Lock Washer
2
DD x 1
Hex Wrench
3. Attach small legs (F) to square table top (C)
using two nuts (AA), two flat washers (BB)
and two lock washers (CC). Tighten with
hex wrench (DD). Do not overtighten to
avoid cracking the wood.
Hardware Used
AA Nut x 8
BB x 8
Flat Washer
CC x 8
Lock Washer
1
DD x 1
Hex Wrench
DD
DD
B
C
A
D
D
D
E
E
E
F
F
F
F
E
D
DD
Lowes.com/allenandroth

A
C
D
D
D
D
B
E
E
E
E
F
F
F
F
5
CARE AND MAINTENANCE
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-866-439-9800,
8 a.m. - 8 p.m., EST, Monday - Friday.
Printed in Thailand
• Periodically check to make certain all components are properly positioned, free from damage
and firmly connected.
• Wipe clean using a damp cloth and a mild cleaner. Wipe dry with a clean cloth.
160126-A
160126-B
160126-C
160126-D
160126-E
160126-F
PART DESCRIPTION
A Scallop Table Top
B Round Table Top
C Square Table Top
D Large Leg
E Meduim Leg
F
AA
BB
Small Leg
160126-AA
Nut
160126-BB
Flat Washer
160126-CC
CC Lock Washer
160126-DD
DD Hex Wrench
PART #
AA BB CC DD
allen + roth® is a registered trademark
of LF, LLC. All rights reserved.