LG OUTDOOR GCO22 User manual

THIS IS AN IMPORTANT DOCUMENT PLEASE READ AND KEEP
WITH YOUR RECEIPT
Product After Care
To prolong the life of your product, some additional minor maintenance and aftercare will be required.
Warm soapy water is recommended to clean the product, steel components may corrode if not treated
(For guidance contact manufacturer), an all purpose water sealant should be used to protect stone
table tops, and enclosed touch up paint can repair minor defects. Throughout the winter months, we
recommend bringing indoors where possible or using a furniture cover.
General Warranty Conditions
The warranty applies to the original purchaser from the date of purchase and covers manufacturing
faults and defects only. If an item should fail as a result of a manufacturing fault or defect under normal
domestic use, the manufacturer at their discretion will repair, refinish or replace the failed item. The
manufacturer reserves the right to substitute failed items with a similar product should the model or
colour no longer be available. Any replacement will be for the failed item only not a complete set. The
original warranty period is not extended in the event of a repair, refinish or replacement. In the event of
a failure, it is the customer’s responsibility to return the item to the store of purchase along with a copy
of the receipt. Warranty specifically excludes general wear and tear, rusting of steel components and
parts, corrosion, commercial use and damage caused as a result of failure to observe reasonable care,
maintenance and assembly instructions for both furniture and hardware.
Necessary Tools
Please check the pack contents before attempting to assemble this product. A full checklist of
Components is given in this leaflet. If any components are missing, please contact the retailer from
whom you bought this product
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG CHILDREN.
Read this leaflet in full before commencing assembly.
G old Coast 3 Seat Swing GCO22

1. Front leg
2. Back leg
3. Leg side base
4."U"support cross bar
5. Top cross beam
6. Canopy frame straight bar
7. Canopy frame "U"bar
8. Swing armrest
9. Spring hook
10. Knob
11.Bolt(M8*45L)
12. Bolt(M8*93L)
13. Bolt(M8*55L)
14. Bolt(M8*60L)
15. Nut(M8)
16. Plastic bolt cap(M8)
17. Plastic nut cap(M8)
18. Metal washer(Φ8.5)
19. Hex wrench
20. Canopy cover
21.Touch-up paint bottle
22.Back frame
23. Seat frame
•
•
No. Description Quantit
y
No. Description Quantity
•
•
2
2
2
1
1
2
2
2
2
2
2
6
8
14
8
22
2
1
1
1
2
4
1
G old Coast 3 Seat Swing GCO22

Fig.4
Fig.1
Fig.5
Fig.6
Fig.7
Fig.3
Fig.2
#1
#2
#14
#16
#6
#20
#18
#3
#4
#5
#17
#17
#15
#12
#18
#16
#16
#11
#23
#18
#15
#22
• •
#13
#14
#14
#13
#16 #18
#17
#15
#10
#7
#9
PLEASE ENSURE ALL FIXINGS ARE LEFT LOOSE DURING ASSEMBLY,
BUT ARE SECURELY TIGHTENED UPON COMPLETION.
GCO22
G old Coast 3 Seat Swing