LG LED LCD TV User manual

www.lg.com
OWNER’S MANUAL
LED LCD TV
Please read this manual carefully before operating your
set and retain it for future reference.

2
ENG
ENGLISH
LICENSES
ENG
ENGLISH
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays
DivX video. Visit divx.com for more information and software tools to convert your
files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered
in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your device setup menu. Go to
vod.divx.com for more information on how to complete your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”
“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation
or its subsidiaries and are used under license.”
Covered by one or more of the following U.S. patents :
7,295,673; 7,460,668; 7,515,710; 7,519,274

3
ENGENGLISH
LICENSES

4
ENG
ENGLISH
TABLE OF CONTENTS
TABLE OF CONTENTS
2LICENSES
6 ASSEMBLING AND PREPAR-
ING
6 Unpacking
7 Parts and buttons
10 Lifting and moving the TV
10 Setting up the TV
10 - Attaching the stand
11 - Mounting on a table
13 - Mounting on a wall
14 - Tidying cables
14 - Connection of TV
14 - How to use Dual Lock™
15 REMOTE CONTROL
18 WATCHING TV
18 Connecting an antenna
18 Turning the TV on for the first time
19 Watching TV
19 Managing programmes
19 - Automatically setting up programme
20 - Manually setting up programme (In
digital mode)
20 - Manually setting up programme (In
analogue mode)
22 - Editing your programme list
23 - CI [Common interface] Information
23 - Selecting the programme list
24 EPG (Electronic Programme Guide) (In
digital mode)
24 - Switch on/off EPG
24 - Select a programme
25 - NOW/NEXT Guide Mode
25 - 8 Day Guide Mode
25 - Date Change Mode
25 - Extended Description Box
26 Using additional options
26 - Adjusting aspect ratio
28 - Changing AV modes
28 - Using the input list
29 - Locking the buttons on the TV (Child Lock)
30 Using the quick menu
31 ENTERTAINMENT
31 - Connecting USB storage devices
32 - Browsing files
33 - Viewing movies
36 - Viewing photos
38 - Listening to music
40 - Extra contents
41 - DivX® VOD Guide
42 CUSTOMIZING TV SETTINGS
42 Accessing main menus
43 Customizing settings
43 - SETUP settings
44 - PICTURE settings
49 - AUDIO settings
52 - TIME settings
54 - LOCK settings
55 - OPTION settings
58 MAKING CONNECTIONS
59 Connection overview
60 Connecting to a HD receiver, DVD, or
VCR player
60 - HDMI connection
60 - DVI to HDMI connection
60 - Component connection
61 - Euro Scart connection
61 - Speaker output Setup
62 Connecting to a PC
62 - HDMI connection
62 - DVI to HDMI connection
62 - RGB Connection
63 Connecting to an audio system

5
ENGENGLISH
TABLE OF CONTENTS
63 - Digital optical audio connection
64 - Headphone connection
64 Connecting to a USB
64 Connecting to a CI Module
65 SIMPLINK connection
65 - Activating the SIMPLINK feature
66 TELETEXT
66 Switch On/Off
66 Simple Text
66 - Page selection
66 Top Text
66 - Block / Group / Page Selection
66 - Direct Page Selection
67 Fastext
67 - Page selection
67 Special Teletext Function
68 DIGITAL TELETEXT
68 Teletext within digital service
68 Teletext in digital service
69 MAINTENANCE
69 Cleaning your TV
69 - Screen and frame
69 - Cabinet and stand
69 - Power cord
70 Preventing “Image burn” or “Burn-in” on
your TV screen
71 TROUBLESHOOTING
73 SPECIFICATIONS
77 IR CODES
78 EXTERNAL CONTROL DEVICE
SETUP
78 RS-232C Setup
78 RS-232C Configurations
79 Communication Parameters
79 Command reference list
80 Transmission / Receiving Protocol
85 OPEN SOURCE LICENSE
85 Open source software notice

6
ENG
ENGLISH
ASSEMBLING AND PREPARING
Remote control and
batteries(AAA)
Owner’s Manual Power Cord
(This item is not included
for all models.)
Polishing cloth1
(This item is not included
for all models.)
Ferrite core
(Depending on model)
Dual Lock™
(This item is not included for all
models.)
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and item.
1 Gently wipe the spots on the cabinet with the polishing cloth.
Only 26LV25**
Screw for assembly Cable Holder DC Adapter
(M4x6)
x 2
(M4x16)
x 2
Only 32/37/42/47LV35**
Screw for assembly
(M4x12)
x 8
Screw for fixing
(Only 32/37LV35**)

7
ENGENGLISH
ASSEMBLING AND PREPARING
yDo not use any pirated items to ensure the safety and product life span.
yAny damages or injuries by using pirated items are not covered by the warranty.
CAUTION
NOTE
yFor an optimal connection, HDMI cables and
USB devices should have bezels less than 10
mm thick and 18 mm width. *A 10 mm
*B 18 mm
yThe items supplied with your product may vary depending on the model.
yProduct specifications or contents of this manual may be changed without prior notice due to
upgrade of product functions.
Parts and buttons
yTV can be placed in standby mode in order to reduce the power consumption. And TV should be
turned off if it will not be watched for some time, as this will reduce energy consumption.
yThe energy consumed during use can be significantly reduced if the level of brightness of the
picture is reduced, and this will reduce the overall running cost.
NOTE
yDo not step on the glass stand or subject it to any impact. It may break, causing possible injury
from fragments of glass, or the TV may fall.
yDo not drag the TV. The floor or the product may be damaged.
CAUTION

8
ENG
ENGLISH
ASSEMBLING AND PREPARING
1 Intelligent sensor - Adjusts the image quality corresponding to the surrounding environment.
2. Touch Button - You can use the desired button function by touching.
Button Description
Scrolls through the saved programmes
Adjusts the volume level
Selects the highlighted menu option or confirms an input
Accesses the main menus, or saves your input and exits the menus
Changes the input source
Turns the power on or off
USB IN
IN 3
H/P
OPTICAL
DIGITAL
AUDIO OUT
AUDIO IN
(RGB/DVI)
RGB IN (PC)
RS-232C IN
(CONTROL & SERVICE)
2 1
ANTENNA
IN
VOLUME CONTROL
STEREO(8 )
SPEAKER
OUT
DC-IN
USB IN
IN 3
H/P
PCMCIA Card
Slot
Headphone
Socket
Connection panel
(See p.58)
Speakers
USB input
Touch buttons2
Only 26LV25**
Remote control and
intelligent1sensors
Power Indicator
(Can be adjusted using
the Power Indicator in
the OPTION menu.)
yImage shown may differ from your TV.
Clock
LED
HDMI
Screen

9
ENGENGLISH
ASSEMBLING AND PREPARING
USB IN
H/P
OPTICAL
DIGITAL
AUDIO OUT
AUDIO IN
(RGB/DVI)
RGB IN (PC)
RS-232C IN
(CONTROL & SERVICE)
2 1
ANTENNA
IN
VOLUME CONTROL
STEREO(8 )
SPEAKER
OUT
USB IN
IN 3
H/P
P
OK
INPUT
HOME
Connection panel
(See p.58)
Touch buttons2
1 Intelligent sensor - Adjusts the image quality corresponding to the surrounding environment.
2. Touch Button - You can use the desired button function by touching.
Button Description
Scrolls through the saved programmes
Adjusts the volume level
Selects the highlighted menu option or confirms an input
Accesses the main menus, or saves your input and exits the menus
Changes the input source
Turns the power on or off
Speakers
Only 32/37/42/47LV35**
Remote control and
intelligent1sensors
Power Indicator
(Can be adjusted using
the Power Indicator in
the OPTION menu.)
yImage shown may differ from your TV.
Clock
LED
PCMCIA Card
Slot
Headphone
Socket
USB input
HDMI
Screen

10
ENG
ENGLISH
ASSEMBLING AND PREPARING
Lifting and moving the TV
When moving or lifting the TV, read the following to
prevent the TV from being scratched or damaged
and for safe transportation regardless of its type
and size.
yIt is recommended to move the TV in the box
or packing material that the TV originally came
in.
yBefore moving or lifting the TV, disconnect the
power cord and all cables.
yWhen holding the TV, the screen should face
away from you to prevent the screen from
scratches.
yHold the top and bottom of the TV frame firmly.
Make sure not to hold the transparent part,
speaker, or speaker grill area.
yWhen transporting a large TV, there should be
at least 2 people.
yWhen transporting the TV by hand, hold the
TV as shown in the following illustration.
yWhen transporting the TV, do not expose the
TV to jolts or excessive vibration.
yWhen transporting the TV, keep the TV
upright, never turn the TV on its side or tilt
towards the left or right.
yAvoid touching the screen at all times, as
this may result in damage on the screen
or some of the pixels used to create
images.
CAUTION (Only 26LV25**)
1Lay the TV with the screen side down on a flat
surface.
yLay a foam mat or soft protective cloth
on the surface to protect the screen from
damage.
CAUTION
2Assemble the parts of the Stand Body with the
Stand Base of the TV.
3Secure the TV and the stand with the 2 screws.
Stand
Body
Stand Base
(M4x6)
(M4x16)
yTighten the screws firmly to prevent
the TV from tilting forward. Do not over
tighten.
CAUTION
Setting up the TV
yImage shown may differ from your TV.
Put your TV on a pedestal stand and mount the TV
on a table.
Attaching the stand

11
ENGENGLISH
ASSEMBLING AND PREPARING
(Only 32/37/42/47LV35**)
1Lay the TV with the screen side down on a flat
surface.
yLay a foam mat or soft protective cloth
on the surface to protect the screen from
damage.
CAUTION
2Assemble the parts of the Stand Body with the
Stand Base of the TV.
3Secure the TV and the stand with the 4 screws.
yTighten the screws firmly to prevent
the TV from tilting forward. Do not over
tighten.
CAUTION
Mounting on a table
yImage shown may differ from your TV.
1Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (minimum) space from the
wall for proper ventilation.
2Connect the power cord to a wall outlet.
yDo not place the TV near or on sources
of heat, as this may result in fire.
CAUTION
ySwivel 20 degrees to the left or right and
adjust the angle of the TV to suit your
view.(Except for 26LV25**)
NOTE
10 cm
10 cm
10 cm
10 cm
Stand Body
Stand Base

12
ENG
ENGLISH
ASSEMBLING AND PREPARING
Securing the TV to a table
yImage shown may differ from your TV.
(Only 32/37/42/47LV35**)
Fix the TV to a table to prevent from tilting forward,
damage, and potential injury.
Mount the TV on a table, and then insert and
tighten the supplied screw on the rear of the stand.
yTo prevent TV from falling over, the TV
should be securely attached to the floor/
wall per installation instructions. Tipping,
shaking, or rocking the TV may cause
injury.
WARNING
Securing the TV to a wall
yImage shown may differ from your TV.
1Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
yUse a platform or cabinet that is strong
and large enough to support the TV
securely.
NOTE
yMake sure that children do not climb on
or hang on the TV.
CAUTION
4-Screws
(not provided as parts of the product)
Desk
Stand
yScrews: M5 x L (*L: Table depth + 8-10 mm)
ex) Table depth: 15mm, Screw: M5 x 25
NOTE
AC IN
CABLE MANAGEMENT
AC IN
CABLE MANAGEMENT
CABLE MANAGEMENT
AC IN
1-Screw (provided as parts of the product)
Desk
Stand
(Only 32/37LV35**)

13
ENGENGLISH
ASSEMBLING AND PREPARING
Using the Kensington security system (This feature is
not available for all models.)
yImage shown may differ from your TV.
The Kensington security system connector is
located at the rear of the TV. For more information
of installation and using, refer to the manual
provided with the Kensington security system or
visit http://www.kensington.com.
Connect the Kensington security system cable
between the TV and a table.
Mounting on a wall
Attach a wall mount bracket at the rear of the TV
carefully and install the wall mount bracket on a
solid wall perpendicular to the floor. When you
attach the TV to other building materials, please
contact qualified personnel.
LG recommends that wall mounting be performed
by a qualified professional installer.
10 cm
10 cm
10 cm
10 cm
Make sure to use screws and wall mount
bracket that meet the VESA standard. Standard
dimensions for the wall mount kits are described in
the following table.
Model 26LV25** 32LV35**
VESA (A x B) 100 x 100 200 x 100
Standard screw M4 M4
Number of screws 4 4
Wall mount
bracket
LSW100B, LSW100BG
Model 37LV35** 42/47LV35**
VESA (A x B) 200 x 200 400 x 400
Standard screw M6 M6
Number of screws 4 4
Wall mount
bracket
LSW200B,
LSW200BG
LSW400B,
LSW400BG,
Separate purchase(Wall Mounting Bracket)
yDisconnect the power first, and then move
or install the TV. Otherwise electric shock
may occur.
yIf you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury.
Use an authorized LG wall mount bracket
and contact the local dealer or qualified
personnel.
yDo not over tighten the screws as this may
cause damage to the TV and void your
warranty.
yUse the screws and wall mount bracket that
meet the VESA standard. Any damages
or injuries by misuse or using an improper
accessory are not covered by the warranty.
CAUTION
yUse the screws that are listed on the
VESA standard screw specifications.
yThe wall mount kit includes an installation
manual and necessary parts.
yThe length of screws may differ
depending on the wall mount. Make sure
to use the proper length.
yFor more information, refer to the manual
supplied with the wall mount bracket.
NOTE

14
ENG
ENGLISH
ASSEMBLING AND PREPARING
(Only 26LV25**)
Cable Holder
Tidying cables
yImage shown may differ from your TV.
1After connecting the cables as necessary,
install Cable Holder as shown and bundle the
cables.
1Gather and bind the cables with the Cable
Holder on the TV back cover.
(Only 32/37/42/47LV35**)
Cable Holder
Connection of TV
DC Adapter
1Connect the antenna cable to the antenna
input port on the TV.
2Connect the DC adapter plug to the power
input jack on the TV.
3Connect the power cord to the DC adapter first,
then plug the power cord into the wall power
outlet.
(Only 26LV25**)
yImage shown may differ from your TV.
How to use Dual Lock™
(This feature is not available for all models.)
Fix the set-top box to the TV and use it when you
want to.
1After removing the protection paper from the
Dual Lock, stick it to the TV and the set-top
box as shown.
2Attach the set-top box to the TV by pressing
the Velcro strips together.
yPlease make sure no foreign substances
exist on the surface of the product, and
then firmly attach the Dual Lock.
yBefore attaching the set-top box to the
TV set, let the attached Dual Lock dry for
at least three days.
NOTE

15
ENGENGLISH
REMOTE CONTROL
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching
and ends to the label inside the compartment, and close the battery cover. Be
sure to point the remote control to the remote control sensor on the TV.
To remove the batteries, perform the installation actions in reverse.
yDo not mix old and new batteries, as this may damage the remote control.
CAUTION
P
A
G
E
P
1 2 3
4 5
0
6
7 8 9
LIST
Q.VIEW
AV MODE INPUT
TV/
RAD
ENERGY
SAVING
MARK
RATIO
MUTE
OK
Q.MENU AD ALARM
EXIT
OK
GUIDE PORTAL
Home BACK
INFO
GUIDE PORTAL
Home BACK
INFO
EXIT
P
A
G
E
P
1 2 3
4 5
0
6
7 8 9
LIST
Q.VIEW
AV MODE INPUT
TV/
RAD
ENERGY
SAVING
MARK
RATIO
MUTE
OK
Q.MENU AD ALARM
EXIT
OK
GUIDE PORTAL
Home BACK
INFO
GUIDE PORTAL
Home BACK
INFO
EXIT
(POWER)
Turns the TV on or off.
ENERGY SAVING (See p.44)
Adjusts the brightness of the screen to reduce energy consumption .
AV MODE (See p.28)
Selects an AV mode.
INPUT (See p.28)
Changes the input source; Turns the TV on .
TV/RAD
Selects Radio, TV and DTV programme.
Number buttons
Enters numbers.
LIST (See p.23)
Accesses the saved programme list.
Q.VIEW
Returns to the previously viewed programme.

16
ENG
ENGLISH
REMOTE CONTROL
P
A
G
E
P
1 2 3
4 5
0
6
7 8 9
LIST
Q.VIEW
AV MODE INPUT
TV/
RAD
ENERGY
SAVING
MARK
RATIO
MUTE
OK
Q.MENU AD ALARM
EXIT
OK
GUIDE PORTAL
Home BACK
INFO
GUIDE PORTAL
Home BACK
INFO
EXIT
P
A
G
E
P
1 2 3
4 5
0
6
7 8 9
LIST
Q.VIEW
AV MODE INPUT
TV/
RAD
ENERGY
SAVING
MARK
RATIO
MUTE
OK
Q.MENU AD ALARM
EXIT
OK
GUIDE PORTAL
Home BACK
INFO
GUIDE PORTAL
Home BACK
INFO
EXIT
+ -
Adjusts the volume level.
MARK
Selects a menu or option.
RATIO (See p.26)
Resizes an image.
MUTE
Mutes all sounds.
P
Scrolls through the saved programmes.
PAGE
Moves to the previous or next screen.
GUIDE
Shows programme guide.
PORTAL
Displays and removes hotel interactive menu.
INFO (See p.24)
Views the information of the current programme and screen.
Navigation buttons (up/down/left/right)
Scrolls through menus or options.
OK
Selects menus or options and confirms your input.
Home
Selects a menu.
Clears all on-screen displays and returns to TV viewing from any menu.
BACK
Returns to the previous level.
EXIT
Clears all on-screen displays and return to TV viewing.

17
ENGENGLISH
REMOTE CONTROL
P
A
G
E
P
1 2 3
4 5
0
6
7 8 9
LIST
Q.VIEW
AV MODE INPUT
TV/
RAD
ENERGY
SAVING
MARK
RATIO
MUTE
OK
Q.MENU AD ALARM
EXIT
OK
GUIDE PORTAL
Home BACK
INFO
GUIDE PORTAL
Home BACK
INFO
EXIT
P
A
G
E
P
1 2 3
4 5
0
6
7 8 9
LIST
Q.VIEW
AV MODE INPUT
TV/
RAD
ENERGY
SAVING
MARK
RATIO
MUTE
OK
Q.MENU AD ALARM
EXIT
OK
GUIDE PORTAL
Home BACK
INFO
GUIDE PORTAL
Home BACK
INFO
EXIT
Coloured buttons
These buttons are used for teletext (on TELETEXT models only),
Programme edit.
P
A
G
E
P
1 2 3
4 5
0
6
7 8 9
LIST
Q.VIEW
AV MODE INPUT
TV/
RAD
ENERGY
SAVING
MARK
RATIO
MUTE
OK
Q.MENU AD ALARM
EXIT
OK
GUIDE PORTAL
Home BACK
INFO
GUIDE PORTAL
Home BACK
INFO
EXIT
TELETEXT BUTTONS (See p.66)
These buttons are used for teletext.
For further details, see the ‘Teletext’ section.
SUBTITLE
Recalls your preferred subtitle in digital mode.
Control buttons( , , , , )
Controls the MY MEDIA menus, or the SIMPLINK compatible devices
(USB,SIMPLINK).
SIMPLINK (See p.65)
Accesses the AV devices connected to the TV;
Opens the SIMPLINK menu.
Q. MENU (See p.30)
Accesses the quick menus.
AD
Switches the Audio Description On or Off.
ALARM
Sets the alarm function.

18
ENG
ENGLISH
WATCHING TV
WATCHING TV
ANTENNA
IN
yFor optimum picture quality, adjust
antenna direction.
yIn poor signal areas, to achieve better
picture quality it may be necessary to
install a signal amplifier to the antenna.
yIf the image quality is poor with an
antenna connected, aim the antenna to
the correct direction.
yAn antenna cable and converter are not
supplied.
NOTE
Turning the TV on for the first
time
When you turn the TV on for the first time, the
Initial setting screen appears. Select a language
and customize the basic settings.
1Connect the power cord to a power outlet.
2
In Standby mode, press (POWER) to turn the TV
on.
The Initial setting screen appears if you turn
the TV on for the first time.
yYou can also access Factory Reset by
accessing OPTION in the main menus.
NOTE
Wall Antenna
Socket
Connecting an antenna
Connect an antenna to watch TV while referring to
the following.
To prevent damage do not connect to the mains
outlet until all connections are made between the
devices.
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
3Follow the on-screen instructions to customize
your TV settings according to your preferences.
Selects a language to display.
Selects a country to display.
(Depending on model)
Language

Country

Time Zone

Set Password

Auto Tuning Scans and saves
available programmes
automatically.
Set the password.
(When France is selected for
Country)
yFor those countries without confirmed
DTV broadcasting standards, some DTV
features might not work, depending on
the DTV broadcasting environment.
yWhen France is selected for Country,
password is not ‘0’, ‘0’, ‘0’, ‘0’ but ‘1’, ‘2’,
‘3’, ‘4’.
NOTE
Selects the time zone and
daylight saving.
(When Russia is selected for
Country)

19
ENGENGLISH
WATCHING TV
4When the basic settings are complete,
press OK.
yIf you do not complete the Initial setting, it
will appear whenever the TV turns on.
yDisconnect the power cord from the
power outlet when you do not use the TV
for a long period of time.
NOTE
5To turn the TV off, press (POWER) .
Watching TV
1In Standby mode, press
(POWER) to turn the
TV on.
2Press INPUT and select Antenna.
3To turn the TV off, press
(POWER) .
The TV switches to Standby mode.
Managing programmes
Automatically setting up programme
1Press Home to access the main menus.
2Press the Navigation buttons to scroll to
SETUP and press OK.
3Press the Navigation buttons to scroll to
Auto Tuning and press OK.
4Select Start to start automatic tuning.
The TV scans and saves available pro-
grammes automatically.
5When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
NOTE
yIf the TV scans a blocked programme, you
will be prompted to enter your password to
keep the programme scanned.
yThe number of programmes that you can
store differs depending on the broadcasting
signal environment.
yIf you wish to keep on auto tuning select
Start using the button. Then, press the
OK button. Otherwise select Close.
yWhen select Italy in the Country menu, if
the pop up is displayed when the conflicted
programme after Auto Tuning, select a
broadcaster for conflicting programme
number to solve.
Use this to automatically find and store all avail-
able programmes.
When you start auto programming, all previously
stored service information will be deleted.

20
ENG
ENGLISH
WATCHING TV
Manually setting up programme (In
digital mode)
Manual Tuning lets you manually add a pro-
gramme to your programme list.
1Press Home to access the main menus.
2Press the Navigation buttons to scroll to
SETUP and press OK.
3Press the Navigation buttons to scroll to
Manual Tuning and press OK.
4Press the Navigation buttons to scroll to DTV
and press OK.
5Scroll through the programme types, and then
add or delete programmes.
6When you are finished, press EXIT.
When you return to the previous menu, press BACK.
NOTE
yIf the TV scans a blocked programme, you
will be prompted to enter your password to
keep the programme scanned.
yYou can select SBAND when the country is
set to "Norway, Latvia."
Selecting DTV,
1Press Home to access the main menus.
2Press the Navigation buttons to scroll to
SETUP and press OK.
3Press the Navigation buttons to scroll to
Manual Tuning and press OK.
4Press the Navigation buttons to scroll to Cable
DTV and press OK.
5Scroll through the programme types, and then
add or delete programmes.
6When you are finished, press EXIT.
When you return to the previous menu, press BACK.
NOTE
yIf the TV scans a blocked programme, you
will be prompted to enter your password to
keep the programme scanned.
ySymbol rate : Enter a user-defined symbol rate (Sym-
bol rate: Speed at which a device such as modem
sends symbols to a channel).
yModulation : Enter a user-defined modula-
tion. (Modulation: Loading of audio or video
signals onto carrier).
Selecting Cable DTV,
NOTE
yIf the TV scans a blocked programme, you
will be prompted to enter your password to
keep the programme scanned.
yL: SECAM L/L’ (France)
yBG : PAL B/G, SECAM B/G (Europe / East
Europe / Asia / New Zealand / M.East /
Africa)
yI : PAL I (U.K. / Ireland / Hong Kong / South
Africa)
yDK : PAL D/K, SECAM D/K (East Europe /
China / Africa / CIS)
yTo store another channel, repeat steps 5 to
10.
Manually setting up programme (In
analogue mode)
Manual Tuning lets you manually tune and arrange
the stations in whatever order you desire.
1Press Home to access the main menus.
2Press the Navigation buttons to scroll to
SETUP and press OK.
3Press the Navigation buttons to scroll to
Manual Tuning and press OK.
4Press the Navigation buttons to scroll to
TV or Cable TV and press OK.
5Scroll through the programme types, and then
add or delete programmes.
6Press the Navigation buttons to scroll to
TV System.
7Press the Navigation buttons to scroll to
V/UHF or Cable.
8Press the Navigation buttons or Number but-
tons to scroll to the desired channel number.
9Press the Navigation buttons to scroll to
commence searching.
10 Press the Navigation buttons to scroll to
Store and press OK.
11 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.