LHBcraft OT001-box C User manual

LHBcraft
PE Rattan Furniture Set
Assembly Instructions
OT001--box C
Thanks for choosing our product.
1. There will be three boxes(box A,box B,box C)in total for this whole product. Before assembling, please check
you receive all the parts listed below. If there is any missing or damaged part, or if you have any question,
please feel free to contact our service team for help.
2. Two persons are recommended to assemble the set.
3. Recommend to use waterproof furniture cover for entire furniture set when it is used outdoor to keep them
longer lifetime.
4. Sofa cushion covers can be removed and cleaned up by cleaner when there are stains.
5.If the screw hole cannot be aligned, try loosening the screw on the other side.
ATTENTION

1
Left Arm 1PC
Right Arm 1PC
1PCS
A2
B2
A3
E6
1PC
1PC
B1
A1
Long Back Cushion 2PCS
2PCS
a9
8PCSSeat Cushion 2PCS Back Cushion 2PCS
①
E2 E3
8PCS
1PC
M6 20PCS
a1 a3
a8
a7
a5
M6x25 16PCS M6x35 8PCS
Parts List
M6x30 12PCS
a2
Please kindly check parts list and follow the assembly guide to install your furniture set.
Any problems, please feel free to contact us.
WhatsApp
[email protected]
Email:
These parts are in box C, the other parts are in box A and box B.
B3
1PCS

2
STEP1
STEP2
Left Corner Sofa Assembly
A3
A1
A3
A1 A2
a3
2PCS
a5
4PCS
A1
1PC
A3
1PC
a2
2PCS
a3
2PCS
a5
6PCS
A2
1PC
a2
4PCS
a3
a3
a7
a7
a5
a5
Kindly check A1 and B1, A2 and B2 very carefully,
which are similar but has different hole position on
the side of sofa.

3
STEP3
ASSEMBLE ACCOMPLISHED
Left coner sofa
A3
A1
A2
①①
①
a7 a8
a1
a1
8PCS
a8
4PCS
①
4PCS
A3
A1 A2
Install all feet on the chair.
①
Tips: You can adjust the parts a8 to keep sofa in balance.
The blue plastic cover on each feet
should be removed after assembled.

4
B3B1
B3
B1
B2
STEP1
STEP2
Right Corner Sofa Assembly
a3
2PCS
a5
4PCS
B1
1PC
B3
1PC
a2
2PCS
a3
2PCS
a5
6PCS
B2
1PC
a2
4PCS
a3
a7
a5
a3 a7
a5
Kindly check A1 and B1, A2 and B2 very carefully,
which are similar but has different hole position on
the side of sofa.

5
B3
B1
B2
①
STEP3
ASSEMBLE ACCOMPLISHED
B3
B1
B2
①
①
①
Install all feet on the chair.
a7 a8
a1
a1
8PCS
a8
4PCS
①
4PCS
Tips: You can adjust the parts a8 to keep sofa in balance.
Right coner sofa
The blue plastic cover on each feet
should be removed after assembled.

6
Use Clips to keep the sofas connected.
a9
a9
Clips Assembly
Cushion Assembly
Attention
1.We care about each customer's user experience. Please feel free to contact us if you have any
questions, such as missing parts, or defective parts in transit. We will offer good solutions to you ASAP.
2.We recommend to use a waterproof cover for this patio sofa set when not in use, especially in rainy
days, in order to prolong item life.
3. The cushion covers are removable and can be cleaned up by detergent when there are stains on them.
4. It's available to adjust the foot height by adjusting the knobs a8 regarding ground condition in order to
keep the sofa set in balance.