LHBcraft OT001 User manual

LHBcraft
PE Rattan Furniture Set
Assembly Instructions
OT001--box B
Thanks for choosing our product.
1. There will be three boxes(box A,box B,box C)in total for this whole product. Before assembling, please check
you receive all the parts listed below. If there is any missing or damaged part, or if you have any question,
please feel free to contact our service team for help.
2. Two persons are recommended to assemble the set.
3. Recommend to use waterproof furniture cover for entire furniture set when it is used outdoor to keep them
longer lifetime.
4. Sofa cushion covers can be removed and cleaned up by cleaner when there are stains.
5. If the screw hole cannot be aligned, try loosening the screw on the other side.
ATTENTION

1
1PC 1PC
1PC
D1 D2
D3
1PC
D4
4PCS
a9
2PCS
2PCS 2PCS
10PCS 2PCS
Seat Cushion 2PCS Back Cushion 2PCS
E1 C1
C2 C3
① ②
E2 E3
Table Glass 1PC
12PCS1PC
M6 26PCS
a1 a2
a8a7
a3 a5
M6x35 4PCSM6x25 24PCS M6x30 22PCS
Parts List
Please kindly check parts list and follow the assembly guide to install your furniture set.
Any problems, please feel free to contact us.
WhatsApp
[email protected]
Email:
These parts are in box B, the other parts are in box A and box C.

2
STEP1
STEP2
D2
D3
D3
D2
D1
D1
D3
Table Assembly
a2
3PCS
a5
2PCS
D3
1PC
D2
1PC
a2
a7
a5
a2
2PCS
a5
3PCS
D1
1PC
a2
5PCS
a5
5PCS
D4
1PC
a2
a7
a5
STEP3
D2
D4
a7
a5
a2

3
D1
D3
E1
STEP5
ASSEMBLE ACCOMPLISHED
①
①
①
Remove
D1 D3
E1
D2
STEP4
Install all feet on the table. ①
a7 a8
a1
a1
8PCS
a8
4PCS
①
4PCS
Tips: You can adjust the parts a8 to keep sofa in balance.
The blue plastic cover on each feet
should be removed after assembled.

4
Armless Sofa Assembly
STEP1
STEP2
C3
C1
C2
C3
C2
a2
a2
a7
a7
a5
a5
a2
2PCS
a5
2PCS
C3
1PC
C2
1PC
a3
2PCS
a5
6PCS
a2
4PCS
C1
1PC

5
ASSEMBLE ACCOMPLISHED
Now you can assemble another
armless chair with the same steps.
①
①
①
①
①
②
②
②
①
a7
a7
Install all feet on the chair.
Tips: You can adjust the parts a8 to keep sofa in balance.
STEP3
a1
a1
a8
a8
a1
8PCS
a8
4PCS
①
3PCS
②
1PCS
C3
C1
C2
The blue plastic cover on each feet
should be removed after assembled.

6
Cushion Assembly
Use clips to keep the sofas connected.
Clips Assembly
a9
a9
Attention
1.We care about each customer's user experience. Please feel free to contact us if you have any questions, such as
missing parts, or defective parts in transit. We will offer good solutions to you ASAP.
2.We recommend to use a waterproof cover for this patio sofa set when not in use, especially in rainy days, in order to
prolong item life.
3. The cushion covers are removable and can be cleaned up by detergent when there are stains on them.
4. It's available to adjust the foot height by adjusting the knobs a8 regarding ground condition in order to keep the sofa set
in balance.