LIBRATONE TRACK Air+ User manual

TRACK Air+
User Manual
App Download
Button and Interface Instruction
First Use and Pairing
Connect
Power On and Off
Basic Operation
Smart Noise Cancelling
Wear Detect
Sleep
Connect To a New Device
Status Indication
FAQ
Button and Interface Instruction
①Function Button ②Indicator Light (LED) ③Charging Port
* To avoid damage of the charging port, please make sure you dry your earbuds of water before
putting them back to the charging case

First Use and Pairing
Put the two earbuds into the charging case to power them on. They will enter pairing mode
automatically
Connect
1. Connect the left earbud

Connect the left earbud
with your phone via Bluetooth, when the earbuds are in pairing mode
* When the two earbuds are in the charging case, long press the function button for 2s to enter
pairing mode. The light will fast blink continuously
2. Pair the right earbud

Right after the left
earbud is connected, a pop up window will appear on your phone. Click 'Pair' or 'Ok', and the
right earbud is paired with the phone to complete the connection
3. Connected

Done! Put on the earbuds and
enjoy your music.
* Each time it's used, the earbud which is taken out of the charging case first will automatically
become the master one. And the master earbud will connect to the moible phone and
synchronously transfer the signal to the other one
Power On and Off

When the
earbuds are in the charging case, just take them out and then will power on automatically, so you
can use them right away

To power
the earbuds off, put them back into the charging case and close the cover
Basic Operation
Gesture Control

To play/pause music or answer/end phones calls, double tap the earbuds. The function can be
customized in the Libratone app
Function Button

Short press the function button in the charging case, to check it's battery level. A red light will
blink when the battery is low, or else the white light will blink
When both earbuds are in the charging case, press and hold the function button for 2s to enter
Bluetooth pairing mode
Smart Noise Cancelling
CityMix® Smart noise cancelling automatically adjusts to an appropriate CityMix® level
according to your surroundings and motions
CityMix® Smart is disabled by default. You can change the settings in the Libratone app
* You can also adjust the noise cancelling level manually in the App
Wear Detect

If you take both earbuds off,
music will be paused or phone calls will be transferred back to your phone automatically
The earbuds will resume playing or
answer phone calls automatically when you put any one of them back on