LIBRATONE Track+ User manual

User Manual
App Download
Button And Interface Instruction
Bluetooth Connection
Basic Operation
Status Indication
CityMix® Smart
Plus 1
FAQ
Button And Interface Instruction
①Function Button ②Volume Down ③Play/Pause Button ④Volume Up ⑤Charging Port
⑥Indicator Light (LED)
Bluetooth Connection
1.Power On
Long press the Function Button for 1s until the LED is lit

2.Enter Bluetooth Pairing Mode
The earphone will enter Bluetooth pairing mode automatically during the first run, this is
indicated by a fast blink of the white LED
*When powered off, press and hold Function Button for more than 3s to enter Bluetooth pairing
mode

3.Select Product
Find and select your Libratone TRACK+ in the Bluetooth device list of your phone
4.Connected

The LED will blink twice when connected. Track+ is ready to play!
Basic Operation
①Function Button
Function Button

Short press to adjust CityMix® noise cancelling level
Double press to activate Ambient Monitoring to lower the music and hear the world - double
press again to go back
Long press for 1s to power on/off
When powered off, press and hold Function Button for more than 3s to enter Bluetooth pairing
mode
①Volume Down ②Play/Pause Button ③Volume Up
Play/Pause Button
Short press to play & pause music / answer & end phone calls
Double click for next track
Triple click for previous track
Long press to enable voice assistant/reject call
(voice assistant is only available when your device supports it and is connected via Bluetooth)
Status Indication

①Indicator Light (LED)
Indicator Light
White LED keeps blinking when Bluetooth pairing mode is activated
Red LED keeps blinking during firmware update
Triple blink of red LED means something is wrong
White LED is solid on when charging(The LED is red when low battery)
The LED is off when fully charged
CityMix® Smart
CityMix® Smart on/off
Enable/disable CityMix® Smart function in the App. When it's enabled, the earphone will
automatically adjust CityMix® levels according to user's surroundings and motion

Plus 1
Setup
Enter the earphone page in App, click the 'PLUS 1' icon at the bottom, follow the instructions to
complete the connection

Enjoy
You can play music synchronously on two connected earphones
FAQ
Playback is interrupted?
Normally, the working distance is 10m at a non-sheltered area. If the distance to the playing
device is more than 10m the music playback will be interrupted
The earphone cannot connect to the phone paired before
If you can't connect, please delete the earphone from the Bluetooth device list in the phone, press
the Function button for 2 seconds to enter Bluetooth pairing mode and then pair with the phone
again
I have two phones, and want to connect both to Track+
If the earphone have been previously paired with the two phones, just select the earphone from
the Bluetooth device list in the phone to connect
The earphone will automatically power off if no operation/playback is detected
By default, the earphone will automatically power off if no operation/playback is detected within
30 minutes to save power. This value can be changed via App

* Phone, tablet computer or any other device with Bluetooth are all applicable This User Manual
takes phone as an example for operation instruction