Licetec V-Comb User manual

Securely attach Capture Filter to the
V-Comb combing head, ensuring it clips
into place (until you hear a click).
Re-attach the combing head to the main
body by aligning the guiding arrows and
twist to lock.

Hold and push down the knobs on both
sides to manually adjust the combing
angle. Two set positions are available:
straight or raking position.

Brush hair to remove knots and separate into
sections using hair clips. Ensure the V-Comb is
the right way up and start from the nape of the
neck, working your way up, one section at a time.
Comb hair in sections no wider than the teeth and
comb close to the scalp. Comb through each
section several times in all directions (top, bottom,
left and right).

After treatment is complete, immediately
remove capture filter from the V-Comb
and replace lid before discarding. Clean
comb with the brush provided.
Refer to page 12 in the Instruction Manual for
thorough cleaning instructions.

Head lice live for approximately 30 days.and a single
female louse can lay up to 150 eggs in its lifetime.
Eggs (nits) hatch in 7-10 days, this is why it is important
to use the V-Comb daily for two weeks during an active
infestation. Breaking the life cycle is essential to ensure
that any eggs or lice that might have been missed or
new lice that have been transferred can be eliminated
before they reach maturity.