
______________________________________________________________________________________
BW-0635 16-08-31 Page 5 of 5www.liden-weighing.com
a. Press this key to adjust zero range (<+/-2%).
b. When the slide down switch on position and screen shows ZERO, hold
down this key lasting 3 seconds and it will display high resolution value.
Press to leave this mode.
c .Turn on the power and then press key and then you will see the
software version. Release this key and it will back to weighing mode.
a. In ZERO mode, press this key briefly to enter multi-range mode l1l l2l auto
c. In ZERO mode, hold down this key to change unit weight(kg/lb or g/oz)
Store weight value (press briefly)
Place baby on the platform and it will hold the baby’s weight after weigh
stable. Hold down this key lasting 3 seconds, it will display and
use to key in the storage position (1-99). Press to
select (1) or (2).
(1) Press to leave or wait for 10 seconds to auto back weighing mode.
(2)Use key to to clear storage value. After clearing, it will display next
memory position. You could go on to clear or press to leave.
Weigh difference
Place baby on the platform and it will hold the baby’s weight after weighing
stable. Press this key, it will display and use to key in the storage
postion (1-99). Press to display the different value. Remove the baby
and the screen will back to weighing mode after 3 seconds.
Recall DIF.:
Press this key briefly and display and use to key in (desired
memory position (1-99), press to display DIF. value. Then back to
weighing mode after 3 seconds.
In zero mode, press this key briefly to display previous reading.