Liebert CSU 3000 User manual

CSU3000 Chiller Designed For Siemens Magnetom Harmony/Symphony 1
Keeping Business in Business
CSU3000 Chiller Designed
For Siemens Magnetom Harmony/Symphony
• Dedicated, equipment-matched cooling supplies the proper temperature and water flow, year round.
• Factory-tested, piped, wired, and charged for hassle-free start-up and operation.
• Local service and parts for quick and knowledgeable maintenance and service
• Optional switch-over to alternate water source provides redundant continuous operation.
• Optional remote monitoring systems keep you informed of chiller operation.
• Standard product ETL/CSA Certified.
• ISO 9000 Certified Company.
Magnetom Harmony/Symphony Specifications
Fluid Specified Water/Glycol
Max Heat Dissipation—BTUH (kW) 102,390
Fluid Temperature Range—°F (°C) 43-54 (6-12)
Fluid Flow Rate—GPM (l/m) 13 (50)
Fluid Pressure Drop—PSI (kPa) 21.8 (150)
Process Fluid Chiller Specifications
Model Number CS135A
Fluid Circulated Water
Net Cooling Capacity—BTUH (kW) 116,000 (34)
Leaving Fluid Temperature—°F (°C) 45 (7.2)
Fluid Flow Rate—GPM (l/m) 24 (91)
Harmony/ Symphony Pressure Drop—PSI (kPa) 21.8 (150)
Chiller Pressure Drop—PSI (kPa) 11.7 (81)
Pump Total Head—PSI (kPa) 56.3 (388)
Pump HP (kW) 3 (2.2)

CSU3000 Chiller Designed For Siemens Magnetom Harmony/Symphony 2
1050 Dearborn Drive
P.O. Box 29186
Columbus, OH 43229
Phone: [phone]
Fax: [phone]
Via Leonardo Da Vinci 8
Zona Industriale Tognana
35028 Piove Di Sacco
Italy
Phone: [phone]
Fax: [phone]
23/F Allied Kajima Bldg.
138 Gloucester Road
Wanchai
Hong Kong
Phone: [phone]
Fax: [phone]
©2000 Liebert Corporation. All rights
reserved throughout the world.
Specifications subject to change without
notice.
®Liebert and the Liebert logo are
registered trademarks of Liebert
Corporation. All names referred to are
trademarks or regisered trademarks of
their respective owners.
* This application requires the chiller modules and storage tank to be mounted in a "CT" sized frame.
74"
(1880mm)
33"
(838mm)
OverallDimension
OverallDimension
PROJECTION OF
DISPLAY BEZEL
5/8" (16mm)
31"
(787mm)
Unit Base
1"
(25.4mm)
SHADED AREAS
INDICATE A RECOMMENDED
CLEARANCE OF 34" (864mm)
BE PROVIDED FOR COMPONENT
ACCESS. FOR RECOMMENDED
MINIMUM CLEARANCE REFER TO
THE INSTALLATION MANUAL.
72"
(1829mm)
UNIT DIMENSIONAL DATA
PCR 3000 DISPLAY
FACTORY SUPPLIED
DISCONNECT SWITCH,
ONE (1) PER MODULE
72"
(1829mm)
Unit Base
Standard Features
• Indoor chiller with outdoor air-cooled condenser
• Electronic controls and monitor
• Semi-hermetic compressor
• Hot gas bypass capacity control
• Circulating pump
• Manual shut-off valves
• Flow switch and check-valve
• Non-locking disconnect switch
• Water- and glycol-cooled models available
Optional Features Available
• Refrigerant gauges and reservoir heaters
• Alternate water source (AWS) module
• Stainless steel circulating pump
• UPS pump connection
• Separate pump power connection
• Locking disconnect switch
• Remote monitoring panel
Required Special Options
• SFA E4968-1, 110 gallon internal storage tank
• SFA E6351-4, Electronic thermostats with auto-
matic cylinder unloader controls
• SFA E5226-1, 3 hp pump
• SFA #E5818-3, Freezestat Change to allow for
45°F water temperature 15% glycol solution is
required to prevent icing
Liebert Web Site—http://www.liebert.com
SL - 16560 (07/00)