Liebert CSU3000 User manual

CSU3000 Chiller For CTI PETNet Cyclotron w/o Redundancy 1
Keeping Business in Business
CSU3000 Chiller
For CTI PETNet Cyclotron w/o Redundancy
• Dedicated cooling supplies the proper temperature and water flow year round.
• Factory-tested, piped, wired and charged for hassle-free startup and operation.
• Local service and parts for quick and knowledgeable maintenance and service.
• Optional switch-over to alternate water source provides redundant, continuous operation.
• Optional remote monitoring systems keep you informed of chiller operation.
• Standard product ETL/CSA certified.
• ISO 9001 certified company.
PETNet Cyclotron Specifications
Fluid Specified Water/Glycol
Max Heat Dissipation—BTUH (kW) 60,000 (17.6)
Fluid Temperature Range—°F (°C) 40-50 (4.4-10)
Fluid Flow Rate—GPM (l/m) 10 (38)
Fluid Pressure Drop—PSI (kPa) 5 (34)
CSU Chiller Specifications
Model Number CS109A
Fluid Circulated Water
Net Cooling Capacity—BTUH (kW) 121,900 (35.7)
Leaving Fluid Temperature—°F (°C) 45 (7.2)
Fluid Flow Rate—GPM (l/m) 24 (91)
PETNet Cyclotron Pressure Drop—PSI (kPa) 5 (34)
Chiller Pressure Drop—PSI (kPa) 8.4 (58.1)
Pump Total Head—PSI (kPa) 35.9 (247.7)
Pump HP (kW) 1.5 (1.1)

CSU3000 Chiller For CTI PETNet Cyclotron w/o Redundancy 2
1050 Dearborn Drive
P.O. Box 29186
Columbus, OH 43229
Phone: [phone]
Fax: [phone]
Via Leonardo Da Vinci 8
Zona Industriale Tognana
35028 Piove Di Sacco
Italy
Phone: [phone]
Fax: [phone]
23/F Allied Kajima Bldg.
138 Gloucester Road
Wanchai
Hong Kong
Phone: [phone]
Fax: [phone]
©2000 Liebert Corporation. All rights
reserved throughout the world.
Specifications subject to change without
notice.
®Liebert and the Liebert logo are
registered trademarks of Liebert
Corporation. All names referred to are
trademarks or regisered trademarks of
their respective owners.
Model No.
A - Width
Inches (mm)
B - Height
Inches (mm)
C - Depth
Inches (mm)
Weight
Lbs. (kg)
CS109A 72 (1829) 72 (1829) 35 (889) 2550 (1157)
Standard Features
• Indoor chiller with outdoor air-cooled condenser
• Electronic controls and monitor
• Semi-hermetic compressor
• Hot gas bypass capacity control
• Circulating pump
• Manual shut-off valves
• Flow switch and check-valve
• Non-locking disconnect switch
• Water- and glycol-cooled models available
Optional Features
• Refrigerant gauges and reservoir heaters
• Alternate water source (AWS) module
• Stainless steel circulating pump
• UPS connection for pump
• Separate pump power connection
• Locking disconnect switch
• Remote monitoring panel
Required Special Options
• SFA#E4968-4—Single-module CSU Chiller with
internal 75 gallon storage tank
• Dual capacity unloaders
• SFA#E6351—Auto-unloading control
• SFA#E9028—Anti-recycle timer
• SFA#E6351-3—CSU with auto-unloading from
electronic temp stat
• SFA#E5818-1—Low-temp freeze stat
Note: Add a minimum of 15% glycol solution for
freeze protection.
Liebert Web Site—http:www.liebert.com
SL-16557 (03/01)