Liebert Process Fluid Chiller PS096A User manual

Process Fluid Chiller Designed for CTI PETNet Cyclotron 1
Keeping Business in Business
Process Fluid Chiller
Designed for CTI PETNet Cyclotron
• Dedicated, equipment-matched cooling supplies the proper temperature and water flow year round.
• Factory-tested, piped, wired and charged for hassle-free startup and operation.
• Clean, non-ferrous cooling loop, required for sensitive medical equipment.
• Local service and parts for quick and knowledgeable maintenance and service.
• Optional switch-over to alternate water source provides redundant, continuous operation.
• Optional remote monitoring systems keep you informed of chiller operation.
• UL/CSA listing on standard models.
• ISO 9001 certified company.
PETNet Cyclotron Specifications
Fluid Specified Water
Heat Dissipation—BTUH (kW) 60,000 (17.6)
Fluid Temperature Range—°F (°C) 40-50 (4.4-10)
Fluid Flow Rate—GPM (l/m) 10 (38)
Fluid Pressure Drop—PSI (kPa) 5 (34)
Note: Performance is based on 95°F condenser ambient.
Process Fluid Chiller Specifications
Model Number PS096A PS096A
Fluid Circulated Ethylene Glycol Propylene Glycol
Net Cooling Capacity—BTUH (kW) 72,400 (21.2) 68,200 (20)
Leaving Fluid Temperature—°F (°C) 45 (7.2) 45 (7.2)
Fluid Flow Rate—GPM (l/m) 10 (38) 10 (38)
PETNet Cyclotron Pressure Drop—PSI (kPa) 5 (34) 5 (34)
Chiller Pressure Drop—PSI (kPa) 6.6 (45) 8.0 (54.5)
Pump Total Head—PSI (kPa) 65 (448) 65 (448)
Head Available for Piping Circuit—PSI (kPa) 53.4 (369) 52.0 (360)
Pump HP (kW) 3 (2.2) 3 (2.2)
Based on Siemens specification dated 07/97

Process Fluid Chiller Designed for CTI PETNet Cyclotron 2
1050 Dearborn Drive
P.O. Box 29186
Columbus, OH 43229
Phone: [phone]
Fax: [phone]
Via Leonardo Da Vinci 8
Zona Industriale Tognana
35028 Piove Di Sacco
Italy
Phone: [phone]
Fax: [phone]
23/F Allied Kajima Bldg.
138 Gloucester Road
Wanchai
Hong Kong
Phone: [phone]
Fax: [phone]
©2000 Liebert Corporation. All rights
reserved throughout the world.
Specifications subject to change without
notice.
®Liebert and the Liebert logo are
registered trademarks of Liebert
Corporation. All names referred to are
trademarks or regisered trademarks of
their respective owners.
Model
No.
A-Width
in. (mm)
B-Height
in. (mm)
C-Depth
in. (mm) D
Weight
lbs. (kg) Voltage (60 Hz)
PS096A 77 (1956) 69.25 (1759) 38.5 (978) 5.5 (140) 750 (340) 460, 3-phase; 208/230, 3-phase
PS120A 77 (1956) 69.25 (1759) 38.5 (978) 5.5 (140) 750 (340) 460, 3-phase; 208/230, 3-phase
Standard Features
• Indoor/outdoor cabinet
• Hermetic compressor
• Refrigerant dehydrator
• Expansion valve
• Refrigerant receiver
• Stainless steel fluid reservoir expansion tank
• Pressure relief valve
• Hot gas bypass valve capacity control
• Stainless steel pump
Optional Features
• Refrigerant gauges and reservoir heater
Suggested Options (may not be required)
• EWB15W—Indoor wallbox with fluid filter, flow
meter, temperature gauges, shut-off/ball valves
and 1" hose barbs.
Accessories
• Emergency water bypass
• Enviro-source emergency bypass
• Water level control and alarm system
•Fluidpressuregauge
•Checkvalve
• Dial thermometer
• Relief valve
• Circuit setter
• Ball valve
• High temperature thermostat
• Low flow switch
• Liebert RCM8 monitor
Required Options
• 100 gallon stainless steel storage tank built into
chiller frame
Liebert Web Site—http://www.liebert.com
SL-16543 (03/01)