Life Ionizers M7 X User manual

1
LIFE | M7 X/M7 X UC NGLifeIonizers.com/support

2
LIFE | M7 X/M7 X UC NG LifeIonizers.com/support
Congratulations on the purchase of your new alkaline mineral water
ionizer. We are grateful to our many customers for recognizing our
eorts in providing the best water ionizer available!
Ionized Alkaline Mineral Water promotes good health with its superi-
or hydration, mineralization, oxygenation and cellular detoxication.
Our ionizers use a series of internal and external ltration systems
and the nest-quality platinum-coated titanium plates, to create
alkaline water with the highest anti-oxidant potential in the industry.
Welcome to the LIFE Ionizers family!
What do I need to know?
• Please read all safety warnings before the installation or
operation of your LIFE Ionizer to ensure proper product usage.
• To receive warranty service, you must register your warranty
online. Please see enclosed warranty card for detailed instructions.
• Refer to this manual when you have questions on adjustments
and how to change your lters. We also have instructional videos
and help guides online at LifeIonizers.com/support.
• Filters are important! To ensure optimal performance and to
guarantee your warranty, internal lters should be changed
annually and a citric acid cleaning lter should be used up to
three times per year to reduce the build-up of minerals found
in the source water which can cause blockage in the ionizer.

3
LIFE | M7 X/M7 X UC NGLifeIonizers.com/support
Safety Guide
Product Specications
Package Contents
Important to Remember
Parts of the Ionizer
M7 X NG Installation (counter top)
M7 X NG UC Installation (under counter)
Quick Connect Fittings and Tubing
Display Overview
Function Options
M7 X NG Operation Method (counter top)
M7 X NG UC Operation Method (under counter)
Internal Filter Replacement
Filter Reset Instructions (counter top)
Filter Reset Instructions (under counter)
Citric Acid (Scaling) Cleaning Filter
Filtration Media
Pre-Filter Replacement
Acidic Cleaning Instructions & Routine Maintenance
Common Problems and Solutions
Operation Warnings/Error Messages
How Alkaline Water is Made
Alkaline/Acidic/Puried Water
Uses of Ionized Alkaline/Acidic Water
Performance Features
Frequently Asked Questions
4
7
8
10
12
14
16
18
19
20
25
26
28
29
30
31
33
34
35
36
37
38
39
40
43
44
Table of Contents

4
LIFE | M7 X/M7 X UC NG LifeIonizers.com/support
Safety Guide
Power Plug
As with most electrical appliances, electrical parts in this
ionizer are electrically live even when the switch is o.
• Power cord should not be touched with wet hands
• Use only (110v) in the USA, Mexico and Japan. Most
other countries require (220v). The power cord cannot
be altered from manufacturer’s specs.
• Do not crimp or staple the power cord
• Power cord should be plugged directly into an
electrical outlet
• Dusty or dirty electrical outlets may cause safety
issues
• Bending, twisting, pulling or putting heavy objects
onto the power word may cause electrical problems
including re.
• If power cord, plug or electrical outlet are damaged,
discontinue use immediately.
• Unplug the electric power when
not in use for a long time (over 3
days)

5
LIFE | M7 X/M7 X UC NGLifeIonizers.com/support
Ionizer
• Place machine in an upright position only
• Do not install this unit in direct sunlight or near a heater,
replace or other heat source
• Do not place the machine in humid areas such as
bathrooms
• If wall mounted, secure rmly and correctly
• Do not use water with a temperature of over 95
degrees Fahrenheit or 35 degrees Celsius
• This machine should not be repaired or otherwise
disassembled by any unauthorized person as it may
cause electrical re or shock and will void the
manufacturer’s warranty
• Do not clean this machine by spraying the ionizer with
water as it may cause electrical shock.
• Do not use benzene, thinner, or chemicals to clean the
unit as it can damage the housing.
• Do not block the unit vent as it can cause overheating
and/or electrical problems.
• Do not block the water passage or tubing
• Do not place anything on the unit
• Don’t shake or drop
the unit
• If the ionizer
machine falls into
water:
1. Unplug power cord
from electrical outlet
2. Wipe the machine
down and place in
shaded area
3. Contact your LIFE
Ionizer dealer

6
LIFE | M7 X/M7 X UC NG LifeIonizers.com/support
Ionized water
• If inexperienced with drinking Ionized Alkaline Water,
users are encouraged to start with level 1
• When drinking Ionized Alkaline Water - Do not take
prescription or other medications for approximately one
hour before and after drinking water. Ionized alkaline
water hydrates more eciently, therefore will deliver
more medication than tap water.
• Store Ionized Alkaline Water in an air-tight glass
container and refrigerate for up to 2 days
• DO NOT DRINK ACIDIC WATER
• Do not store Alkaline or Acidic water in metal containers,
although you can put alkaline water in the Water for LIFE
Stainless Steel bottles as they are designed to maintain
pH and ORP
• Aluminum and brass containers will be tarnished by
alkaline and acidic water
• If not used for several days, run water through the unit
for 1 to 3 minutes before starting
• If the machine will not be
used for several days:
1. Unplug the power cord
from the electrical outlet
2. Turn o the water valve to
avoid leaking
3. Remove lters, drain and
place in refrigerator in
plastic bags.
4. Let water run on the
“Puried Water” setting for
at least 3-5 minutes
before any operation

7
LIFE | M7 X/M7 X UC NGLifeIonizers.com/support
Product Specications
Special features Fully convertible: counter-top to
under counter
Cleaning function Advanced RADC Cleaning System
Display Full Color LED Display w/Automatic
Voice Prompting
Filtration Dual Internal, Custom Pre-lter
Flow Control Automatic
Power in watts Adjusts up to 450 watts
ORP Output up to -700
(Enhanced ORP at drinkable levels)
pH Output pH range from 2.5 up to 11.0
Protection Automatic Heat Sensor
Power System MAX Yield SMPS Power System™
Rated Voltage Dual voltage input compatibility
110/220 volts. All you need is the
power plug or adapter. When
plugged into the power source the
unit automatically recognizes voltage.
Settings 1 Puried, 3 Acidic, 4 Alkaline
Warranty Lifetime Parts plus 10 years labor
Dimensions 13” x 13” ¾ x 6”
Plate Material Platinum over Industrial Titanium

8
LIFE | M7 X/M7 X UC NG LifeIonizers.com/support
Package Contents
Extra Fuse
1/4”Tubing Hose User Manual
BTB Chemical
pH Color
Chart
Reagent Drops
(pH Test Drops)
Suction Cup Located in the Power
Switch at the bottom of the
machine
1
LIFE| M7 X/M7 X UC NGLifeIonizers.com/support
Flexible
Hose
Cold Water
Connect
Faucet
Faucet Adapter
Faucet
Patch Cable
Alkaline/Acid
Hoses
Tubing/Cable
Protector
For M7 X UC NG
Diverter Valve

9
LIFE | M7 X/M7 X UC NGLifeIonizers.com/support
10
9.0
8.0
7.0
6.0
5.0
4.0
Alkaline
Water
Acid
Water
Neutral
PH Tester Kit Instructions:
1. Place 1-2 ounces of water you are
testing into a glass
2. Add 2-3 drops of Reagent Drops
3. Stir water to observe the color
change
4. Compare to “pH COLOR CHART”
to determine pH and acid levels.
When handling the pH test (reagent drops):
1. Keep away from eye area. If eyes become irritated, ush
thoroughly and consult a doctor.
2. If accidentally swallowed, drink water and consult a doctor.
3. Store in an airtight container away from the reach of children.
4. Drops are ammable. Keep away from children.
How to measure the pH of your water
A pH color chart and a bottle of Reagent Drops are included with
your ionizer in case you would like to test the water from your new
ionizer.

10
LIFE | M7 X/M7 X UC NG LifeIonizers.com/support
Important to Remember
• You must run 2-3 gallons of water through the pre-lters before
you connect them to the ionizer. To do this, install the pre-lters
into their housings, connect a piece of tubing to the outlet con-
nection on the pre-lter housing and run it into the sink so you
can ush them out with water. This hydrates the lters and cleans
them from any loose media. After you nish this procedure, con-
nect your pre-lter back to your ionizer and run normally. This
needs to be done every time you put in new pre-lters.
• The pre-lter housings must be replaced every 2 years.
Pre-lter Installation & Maintenance
Ionizer Installation
• Plugs located on the bottom of the ionizer must be removed
before installation.
• Do not overtighten the patch cable connection on the back of
the ionizer when plugging in patch cable.
• Run the ionizer and check for leaks at all tubing locations from
the Diverter Valve to the Ionizer itself before operating the unit.

11
LIFE | M7 X/M7 X UC NGLifeIonizers.com/support
Settings
• Flow rate must be set before adjusting or running your ionizer.
• Set ow rate no higher than 2.5 liters per minute. Anything higher
could cause internal damage.
• When adjusting the settings, the buttons must be pressed
quickly as failure to do so will result in booting you out of the
program menu.
• The unit must be dispensing water before pressing the buttons.
• Adjust the ow rate (LPM) by slowing down the water ow to
ionizer from the source water:
- Cold Water Connect (for under undercounter units)
- Faucet Diverter ( for countertop units)
Ionizer Care
• Do not twist top of faucet. This will damage the faucet.
• We recommend internal lters and pre-lters be changed
annually.
• Citric acid cleaning lter should be used 3 to 4 times
per year.
• Use cold water only with your ionizer

12
LIFE | M7 X/M7 X UC NG LifeIonizers.com/support
xxx-xxxxx-xx-xx
6
345
** Plugs must be removed before installation.
See page 18 for Quick Connect Fittings and Tubing instructions.
Parts of the Ionizer
BACK
BOTTOM
1. First Filter Cover
2. Wall Mount Screw
Holes
3. Speaker
4. Bar Code and Serial
Number
5. Second Filter
6. Under Counter
Installation
Plug/Connector
1. Source water inlet
2. Acidic outlet
3. On/O Power Switch
4. Fuse Box
5. Power Plug

13
LIFE | M7 X/M7 X UC NGLifeIonizers.com/support
1. Control Panel
2. Flexible Spout
3. LCD Panel
2
1
3
A
IonizerParts List and InstallationGuide
1.Referto the diagrams on thefollowing pagebefore beginning
installation
2.Be aw are that a 110v outlet (US) or 220v outlet isrequired.If this
outlet is located under the sink make sure it is not near thewater
source.
3.If after installation thewater has an odor,you may needto install a
pre-filter.Pleaseconsultyour Life Ionizer dealer.
DO NO Trun thefollowingtypes ofwater though the Life Ionizer as it
cancause damageto the unit:
1.Dirty orSaltWater
2.Watercontaining high amounts ofrust or iron
3.Water above 40 degrees C/104 degrees F
Read these instructions thoroughly before attempting
installation
1-AcidWaterSpout
2-Digital Indicator
3-AlkaliWater Spout
4-ControlPanel
WARNING:
Do not twist top of faucet.
This will damage the faucet.
5
FRONT
FAUCET (for M7 X UC)
1- Water Spout
2- Digital Indicator
3- Water Spout
4- Control Panel
5- Top of Faucet
counter hole for faucet
should be 1 3/8”

14
LIFE | M7 X/M7 X UC NG LifeIonizers.com/support
M7 X NG Installation
(counter top)
Refer to diagrams on page15.
(help video on LifeIonizers.com/support)
STEP 1: Unscrew the existing aerator from your faucet.
STEP 2: Use Teon plumber’s tape on the threads. Make sure the black rubber
washer is inside the diverter valve before you screw it onto your
faucet. This assures a proper seal. (Three dierent sized adaptors
are included for non-standard sized faucets).
STEP 3: Unscrew the round nut from the side of the diverter valve. Place the
1/4”tubing through the nut and over the opening. Screw the nut
back onto the diverter valve over the tubing. Tubing should now t
snugly onto the diverter valve.
STEP 4: Run the other end of the 1/4”tubing that you attached to the
diverter valve to the (IN) on the Pre-lter. Connect another piece
of 1/4”tubing to the (OUT) on the Pre-lter. This tube will go to the
inlet valve on the bottom of the ionizer in STEP 6 .
STEP 5: Remove the plugs in the following manner: Lay the ionizer down
on its back and you will see two white elbows extruding from the
bottom of the machine. There will be an o-white collar around the
base of the elbow (see page 18). Push in the collar against the face of
the tting. With the collar held in this position, you can extract the
elbow from the machine. It is sometimes helpful to use the back of
a butter knife or screw driver to remove the plugs.
STEP 6: Insert the 1/4” tubing from the (OUT) on the Pre-lter to the inlet
valve on the bottom of the ionizer using the quick connect instruc-
tions on page 18. Insert another 1/4” tube in the outlet valve on
the bottom of the ionizer and run the other end into the sink secur-
ing it with the suction cup provided. Some units may contain water
Don’t be alarmed; we test units for quality before shipment.
STEP 7: Run the ionizer and check for leaks at all tubing locations from
the Diverter Valve to the Ionizer itself before operating the unit.

15
LIFE | M7 X/M7 X UC NGLifeIonizers.com/support
DIVERTER CONNECTION
STEP 1:
STEP 2:
aerator
STEP 3:
round nut
1/4” tubing
Diverter valve
STEP 4:
elbows
STEP 5:
Bottom of ionizer
Diverter valve
inlet
valve
outlet valve
Bottom of ionizer
suction
cup
Pre-Filter
In Out
plugs
(in green)
STEP 6:
NOTE: Run 2-3 gallons of water
through the pre-lters before you
connect them to the ionizer.
** Plugs must be removed before installation.
Pre-lters
Diverter valve
Option:
Diverter Valve Adapter if
needed for your type of sink.

16
LIFE | M7 X/M7 X UC NG LifeIonizers.com/support
M7 X NG UC Installation
(under counter)
4. Connect the Cold
Water Connect to
the angle stop valve.
Then connect the
cold water line to the
Cold Water
Connect valve.
5. Close tight with
pliers.
6. Connect the 1/4”
tubing and open the
Cold Water Connect
valve. Turn the main
valve back on.
Source Water
** Highlighted plugs must be removed
before installation.
See page 18 for Quick Connect Fittings and Tubing instructions.
(help video on LifeIonizers.com/support) Angle stop valve
Cold water connect valve
1. Find the raw water
valve under sink.
Turn the main valve
(angle stop) o.
2. Take o the cold
water line from the
angle stop valve as
pictured.
3. Totally disconnect
the line as shown
above.
IMPORTANT
COLD WATER CONNECT
7. Run the ionizer and check for leaks at all tubing locations from the
Diverter Valve to the Ionizer itself before operating the unit.

17
LIFE | M7 X/M7 X UC NGLifeIonizers.com/support
xxx-xxxxx-xx-xx
MCU cable
Alkaline hose
Acid hose
Tap water hose
Faucet
Front
Back
Bottom
Rubber packing
Fixing nut
Alkaline hose
MCU cable connector
Acid hose
Union connectors
Faucet patch cable
Plug connector
Faucet turret
Acidic outlet valve
Source water inlet
Adapter
Tap water
hose
Alkaline outlet
Pre lter
(Optional double
or triple housings)
Pre lter(s)
Cold Water Connect
In Out NOTE: Run 2-3 gallons
of water through the
pre-lters before you
connect them to the
ionizer.
LAYOUT DIAGRAM counter hole for faucet
should be 1 3/8”
*Do not over
tighten
connection
on back
of ionizer

18
LIFE | M7 X/M7 X UC NG LifeIonizers.com/support
Quick Connect Fittings
and Tubing
Push the tubing into the quick connect. The collar (gripper )
has teeth which hold the tubing rmly in position while the “O” Ring
provides a permanent leak proof seal.
Check the Seal: Pull on the tubing to see if the seal is secure.
Check for leaks.
Ensure system is depressurized before removing ttings. Push in the
collar against the face of the tting. With the collar held in this position,
the tube can be removed. The tting can then be re-used.
collar
To ensure an optimal seal, tubing should be cut with the end square.
An angled cut or distortion of the tubing will not provide an ecient seal
and may cause leaks. Determine the length of tubing needed for
the connection and cut the segment of tubing to the appropriate length.
push in collar
pull tubing out
quick connect
TO CONNECT:
TO DISCONNECT:

19
LIFE | M7 X/M7 X UC NGLifeIonizers.com/support
1. ON/OFF Button
2. Alkaline Selector
3. Purify Selector
4. Acidic Selector
5. Menu/Function
6. Filter 1 Indicator/Reset
7. Filter 2 Indication/Reset
8. Filter 1/Life Indicator
9. Filter 2/Life Indicator
10. Operation Display Lamp
11. Level Indicator
12. Indicator Water Type (Alkaline/Acidic/Purify)
13. pH Indicator
1211
9
813
10
4325 6 7 1
Display Overview

20
LIFE | M7 X/M7 X UC NG LifeIonizers.com/support
Function Options
AMPS AND LITERS PER MINUTE (LPM)
NOTE: the unit must be dispensing water before pressing the buttons.
• Press and hold“FILTER 1”&“FILTER 2”simultaneously for 5 seconds in
order to enable the display of the Amps & LPM reading indicator light.
• Two numbers will then appear on the indicator.
• The top number is the amps number followed by the digit A.
• The bottom number is the Liters per Minute (LPM) followed by the
digit L.
• Once the LPM is displayed, you can make the necessary adjustment
to the water ow in order to adjust the LPM to the unit. Adjust the
LPM by
slowing down water ow to ionizer from the source water:
- Under Counter - Cold Water Connect
- Counter Top - Faucet Adapter
KEY NOTE: The slower the ow, the stronger the alkaline or acidic
water is produced. We recommend that you set the machine
between a ow of 1.5-2.5LPM.
• For strong 11+pH alkaline or 2.5 pH acid water, we recommend
that the ow rate be set at 1.1-1.5 LPM. Do not set below 1.0 LPM
because it will error out and display E1.
NOTE: Your pH will be determined by your water source. If you’re
on well water, your water is soft, or your TDS is too low, then you
might need a remeneralizing cartridge or a pre-lter to add alkaline
minerals so your unit can ionize properly.
NOTE: FLOW RATE MUST BE SET TO GET PROPER PH LEVELS.
Set ow rate no higher than 2.5 liters per minute. Anything higher could cause internal damage.
Amps & LPM (liters per minute) indicators