Ocean Lantern
- Press and hold the knob to turn the lantern on and off.
- The default lighting mode is warm light.
- To make the lantern at its brightest you will need to turn it four loops clock-
wise.
- To make the lantern its darkest, you will need to turn the switch knob four
loops anti clockwise.
- To switch between warm and cool light, short press the knob switch for
colour temperature change. This will change the light from warm light to
cool light.
- Clockwise rotate the knob switch for cool white light.
- Turn the knob switch anti clockwise for warm light.
- Once colour temperature is selected, short press the knob again to set it to
your chosen colour. Then it will take 4 clockwise loops to turn the lantern to
its brightest.
- The lantern will not turn on when it is in need of charging. When charging,
make sure the lantern is in the OFF position.
Hold the knob for power ON/OFF
Short press for dimmable/colour change adjustment
USB
- The green indicator light flashes when the lantern is charging and stays on
when the lantern is fully charged.
- The USB output is available for external equipment charging and will show a
constant red light when charging.
- The USB output is not available when the lantern is charging.