Osram AR111 User manual

Installation instructions for AR111 luminaires
Product overview
• COINlight AR111 (LED module)
• Matching OPTOTRONIC control gear
The following instructions demonstrate how easy it is to replace an AR111 halogen lamp with a COINlight
AR111 LED module. These instructions are also applicable for initial installations of LED luminaire systems.*
*Please observe the safety and mounting information specified in the product data sheets.

Installation instructions for AR111 luminaires
Instructions
1. Disconnect the existing luminaire from the
existing power supply cable.

Installation instructions for AR111 luminaires
2. Disconnect the existing lamp.
Instructions

Installation instructions for AR111 luminaires
3. Open the lamp housing and remove the existing
lamp.
Instructions

Installation instructions for AR111 luminaires
4. Install the COINlight AR111 LED module and
insert it into the luminaire.
Instructions

Installation instructions for AR111 luminaires
5. Open the cap of the control gear, connect the
power supply cables (observe correct polarity)
and close the cap.
Instructions

Installation instructions for AR111 luminaires
6. LED installation complete. Since the lamp and
the control gear are now directly connected to
each other, the original luminaire connector isn’t
needed anymore and can be removed.
Instructions