Lifeline HomeSafe Cellular User manual

Welcome and
thank you for
selecting the
Lifeline Service!
The Lifeline Communicator
allows you to summon
assistance 24 hours a day
by simply pressing your
Help button.
This Setup Guide will
walk you through how
to activate your
Lifeline Service.
If you have any questions,
please contact Lifeline.
Communicator
Neck Button
or
Wrist Button
Power Cord Optional
Fall Detection
Pendant
Setup Guide
HomeSafe – Cellular
PACKAGE CONTENTS

2
☑Plug the Communicator into a power outlet.
☑Choose a power outlet that can not be
turned off by a wall switch.
☑ Press the ashing, orange Message button
when you are ready to continue
☑Place the Communicator in an area
of the home where you spend most
of your time, such as your bedroom
or living room.
☑Avoid placing the Communicator
next to loud objects, such as the TV,
radio or air conditioner.
☑After plugging in your
Communicator, check the signal
strength bars.*
*For reliable operation,
at least 2 bars should be
lit. It may take several
minutes for signal
strength indication to
appear. Call Lifeline
customer service for
instruction if fewer than
two bars illuminate.
Find a Good Location
Signal

3
A source of loud noise (television, radio, etc.) can interfere
with your communication with a Trained Care Specialist.
In cases when a source of loud noise prevents voice
communication with a Trained Care Specialist,
Lifeline will still send help when we
receive your Help call.
Note
Communicator Base
Multi-story Home

4
Installing Your Communicator
Communicator
(back)
Communicator
(front)
☑Turn ON the Communicator using the
switch on the back.
☑ Press the ashing, orange Message
button when you are ready to continue

5
Conduct a Range Test with Your Help Button
☑
Place the Help button around your neck or on your wrist.
☑Press the Help button as you go from room to room.
☑Continue moving around the home. Be sure
to check the bathroom and all other rooms.
☑When you see the light ashing on
your Help button you will know you
have coverage in that room.
☑Return to the Communicator and
press the ashing, orange Message
button when you are ready
to continue.