
Before use...
Install 4 x AA batteries as follows...
Zip
battery
case
battery case cover
battery case
1. Take the battery case out of the massager 2. Open the battery case as shown above
power cable
battery case
batteries
battery case cover
battery case
3. Insert 4 x AA batteries observing the correct
polarity
4. Close the battery case as shown above
ON/OFF
outer button
Outer
cover
ON/OFF
inner button
Main body
5. Check the case is closed correctly and place
back into the massager
6. Ensure the inner and outer power button are
aligned and zip up the cover.
How to use...
Run yourself a nice hot bath, turn your massager on and use it
anywhere on your body that feels good! Simple!
Precautions
Please read this Instruction Manual carefully to ensure you are using the
massager correctly. Please also note:
• Do not use whilst driving or walking
• Store the massager away from humidity, heat and/or corrosive gas.
• Individuals with symptoms such as inflammation, blood stasis or those who
have undergone a recent operation should not use this product.
• Do not use foot ornaments or jewellery when using this product
• Do not apply nail polish within an hour before using this product.
• If the massager will not be used for a long time, remove the batteries to avoid
leakage.
• This massager is designed as a personal care product. It is not for diagnosis /
treatment of any health disorder or injury, Nor it is meant for commercial use.
• Do not machine wash the outside cover. Only wash by hand.
• Use only the correct size batteries ensuring the correct polarity is observed.
Troubleshooting
Problem Possible Reason Possible Solution
Massager will not power on
Batteries are low / run out Change batteries
Batteries are not installed
correctly
Check if batteries have
been inserted correctly and
are seated suitably.
Weak vibration Batteries are low / run out
Change the batteries.
Check if batteries have
been inserted correctly and
are seated suitably.
Technical
Product Name: Bath Massage Pillow
Product SKU: 1703
Power Supply: 4 x AA batteries
Ideal Environment: Temperature: 5°C - 40°C Relative humidity: ≤80%
Material: Main body: Sponge Foam, PVC waterproof cover Outside cover: Refer to the
washing label.
Product size: 300mm X 260mm X 80mm
Waterproof Grade: IPX7
1703IM - 1703040418.indd 6-7 05/04/2018 10:15:02