Lifetime 90541 User manual

COMPLETE BASKETBALL SYSTEM
OWNER’S MANUAL
Keep this Product ID Number and use when contacting Customer Service:
MODEL N° 90541
OWNER’S MANUAL

2
Save this owner’s manual for future reference and in the event that
the manufacturer has to be contacted.
**U.S. and Canada customers ONLY**
IF ASSISTANCE IS NEEDED,
DO NOT CONTACT THE STORE!
CALL OUR CUSTOMER SERVICE DEPARTMENT at
1 [phone]
HOURS: 7:00 a.m. to 5:00 p.m. Monday through Friday (Mountain Standard Time)
**Call or visit our Web site for Saturday hours**
Lifetime Products, Inc.
PO Box 160010 • Freeport Center, Bldg. D-11 Clearfield, Utah 84016-0010
**For customers outside the U.S. or Canada, please contact the store for assistance.**
INSTRUCTION #1158013 D 7/19/2018
REGISTER YOUR LIFETIME PRODUCT TODAY!
LIFETIME’S PROMISE TO YOU:
We invite you to read our privacy policy at www.lifetime.com
REGISTER today!
At Lifetime, we are committed to providing innovative and quality products. While registering, you will
have the opportunity to give us your feedback. Your input is valuable to us.
• You can also opt in to receive new product notifications or promotions.
• In the unlikely event of a product recall or safety modification, your registration
provides the information we need to notify you directly.
• Registration is fast, easy, and completely voluntary.
Maintaining your privacy is our long-standing policy at Lifetime. And you can rest
assured that Lifetime will not sell or provide your personal data to other third parties,
or allow them to use your personal data for their own purposes.
REGISTER YOUR PRODUCT ONLINE AT WWW.LIFETIME.COM

3
PARTS LIST
ID Item Description Qty
DKM Base 2
AEF Base Plug 2
DKN Support Tube 2
DKO Net Pole 2
DKP Net 1
DKQ Accessory Bag 1
DKR Paddle 4
PARTS IDENTIFIER
DKQ (x1)
Accessory Bag
DKR (x4)
Paddle
Parts shown at 10% of Actual Size
DKV (x1)
Birdie Sleeve EFT (x1)
Volleyball
DKT (x2)
Pickle Ball
DKU (x2)
Birdie
DKO (x2)
Net Pole
DKN (x2)
Support Tube
DKM (x2)
Base
AEF (x2)
Base Plug
DKP (x1)
Net (not to scale)
ID Item Description Qty
EFT Volleyball 1
DKT Pickle Ball 2
DKU Birdie 2
DKV Birdie Sleeve 1
EGN Plastic Stake 4
EGO Guy Line 2
EGP Storage Straps 2
EG0 (x2)
Guy Line
EGN (x4)
Plastic Stake
EGP (x2)
Storage Straps

4
PARTS REQUIRED
Parts shown at 10% of Actual Size
PICKLEBALL AND BADMINTON ASSEMBLY
SEC
1
TOOLS REQUIRED
(1)(1)
or
(35 lb)
DKM (x2)
Base
AEF (x2)
Base Plug
DKP (x1)
Net (not to scale)
DKO (x2)
Net Pole
DKN (x2)
Support Tube

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
5
OPTION A: Fill the Base (DKM) with sand.
SEC
1.1
(1)(1)
OPTION B: Fill the Base (DKM) with water. Add a tablespoon of chlorine bleach.
or
or
DKM DKM
(35 lb)
DKM
AEF
Insert the Base Plug (AEF) into the Base (DKM) as shown.
SEC
1.2
Note: Filling the bases with sand is recommended. Sand will provide increased performance of the
system by increasing stability and allowing for less sag in the net. Sand also reduces the chance of
leakage during storage or transport. If the base is filled with water, make sure that it remains full of
water during use. Performance will be significantly reduced if water has leaked from the system.
!

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
6
NO TOOLS OR HARDWARE REQUIRED FOR THIS PAGE
Slide the Base onto Support Tube (DKN) as shown.
SEC
1.3
Insert the Net Pole (DKO) into the Support Tube (DKN). Make sure the Push
Button clicks into place.
SEC
1.4
DKN
Note: Repeat steps 1.1-1.4 to assemble
the other Pole and Base assembly.
!
DKO
DKN

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
7
NO TOOLS OR HARDWARE REQUIRED FOR THIS PAGE
Arrange the Bases (DKM) as shown, with the Support Legs (DKN) facing in
toward each other.
SEC
1.5
Use the Clip to secure the Net (DKP) to the top loop on the Net Pole.
SEC
1.6
Note: Repeat this step to attach the net
to the other side of the assembly.
!
DKM
DKN
DKM
DKN
DKP
Loop
Loop
Clip
Clip

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
8
NO TOOLS OR HARDWARE REQUIRED FOR THIS PAGE
To adjust the height of the Net, press the Push Buttons near the top of
the Net Pole (DKO) and slide the pole to the desired position. Make sure the
Buttons snap into place. Repeat this for the other side of the assembly.
SEC
1.7
Note: To reduce the width of the Net, roll it onto the Net Pole until the desired length is reached.
!
Note: The Net has three height settings: 36” and 49” for Pickleball, and 61” for Badminton.
!
DKO
Push Buttons

9
VOLLEYBALL ASSEMBLY
PARTS REQUIRED
SEC
2
DKP (x1)
Net (not to scale)
DKO (x2)
Net Pole
DKN (x2)
Support Tube
TOOLS REQUIRED
EGN (x4)
Plastic Stake
EG0 (x2)
Guy Line

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
10
NO TOOLS OR HARDWARE REQUIRED FOR THIS PAGE
Move the cap from the end of the Support Tube (DKN) to the end of the short
protruding tube coming off the side of the Support Tube. Assemble the Net
Pole (DKO) to the Support Tube. Make sure the pins snap into place before
continuing to the next step.
SEC
2.1
Note: You will not need to use the bases for volleyball.
!
Cap DKN
DKO
Note: To reduce the width of the Net, roll it onto the Net Pole until the desired length is reached.
!
Note: The Volleyball Net has three height settings: 90”, 78”, and 65”.
!
Push Button
DKO
90”
78”
65”
Adjust the Net to the desired height. Press the Push Buttons near the top
of the Net Pole (DKO) and slide the pole to the desired position. Make sure
the Buttons snap into place. Repeat this for the other Net Pole assembly.
SEC
2.2