LifeTrak Move C300 User manual

Goal Status Bar
Time/Date
Activity value
Activity type
Quick Start Guide
Watch/screen
images may
vary from
actual model Models: Move C300, Fit C400, Zone C410

Welcome to LifeTrak. Let’s take a quick tour of the basic features.
To turn on your activity tracker, press and hold any button.

MODE
Press to change modes:
Time Hourly Weekly Workout
START/STOP
Press to start and stop in Workout
Press to view: distance calories steps sleep*
Press & hold to read your heart rate
LIGHT
Press together for light
Can use MODE + VIEW or
double-click VIEW
If dark, pressing VIEW will also activate light*
VIEW
NOTE:
The buttons are not
intended for use
under water
BUTTON
LAYOUT
*Available only on C410 1

steps
distance
calories
sleep*
Increase value
In Time,
hold
MODE
for 3
sec
Select
GOAL
INSIDE
SETTING
MODE
GOAL
SETUP
Decrease value
Press: go to next setting
Press & hold: exit setting mode
12
*Available only on C410
2

seconds
minute
hour
year
month
day
month-day
format
12/24 hr
format
In Time,
hold
MODE
for 3
sec
Select
TIME
12
TIME
SETUP
Edit/increase value
INSIDE
SETTING
MODE
Edit/decrease value
Press: go to next setting
Press & hold: exit setting mode 3

In Time,
hold
MODE
for 3
sec
Select
ADV
12
ADVANCED
SETUP
Edit/increase value
INSIDE
SETTING
MODE
Edit/decrease value
Press: go to next setting
Press & hold: exit setting mode
gender
birthday
(year)
birthday
(month)
birthday
(day)
unit
format
weight
height
4

Transfer data between your activity tracker and
Bluetooth Smart Ready devices.
Before you can transfer data, you must install a tness
app on your Bluetooth Smart Ready device.
Visit www.lifetrakusa.com/app to see the list of apps.
Bluetooth Smart Ready Device Setup
Once installed, open the app and tap on
the menu button.
Select DEVICES & APPS.
Locate your LifeTrak activity tracker and
tap connect. It will now attempt to sync.
Next step: set up your activity tracker.
BLUETOOTH®
CONNECTION
Menu button
5

LifeTrak Activity Tracker Setup
Now that your device is attempting to
sync, we need your activity tracker to do
the same.
While in Time, press and hold
START/STOP until it activates a signal
animation on the screen. Both devices will
now attempt to sync data.
NOTE: For best results, keep your
devices within 2 meters of each other
when syncing.
START/STOP
Hold to begin syncing (must be in Time)
Bluetooth Indicator
BLUETOOTH
CONNECTION
6

SLEEP
TRACKER*
Monitors the duration and quality of sleep based on motion
and arm posture.
The sleep tracker has two operating settings: Auto and
Manual.
Auto (default): Sleep tracking is always enabled.
Manual: Sleep tracking is enabled by double-clicking
START/STOP while in Time.
NOTE: If you intend to remove your activity tracker
when you wake up, we recommend you manually stop
the sleep tracker by double-clicking START/STOP while in
Time.
*Available only on C410 7

SLEEP
TRACKER*
*Available only on C410
8
When sleep tracking is enabled, the device will
automatically detect the beginning and end of your sleep
session.
Double-clicking START/STOP while in Time marks the
time you go to bed. It also activates the sleep tracker if in
Manual sleep tracking mode.
Sleep tracker indicator
START/STOP
Double-click to mark the start of intent to
go to sleep OR to start the sleep tracker
when in Manual mode (must be in Time)

Edit setting
In Time,
hold
MODE
for 3
sec
Select
SLEEP
INSIDE
SETTING
MODE
Press: select setting
12
SLEEP
TRACKER*
*Available only on C410
Setting the sleep tracker operation to Auto or Manual.
9

Sleep data collection
Our advanced sleep tracker is smart enough to distinguish
if the device is on or off your wrist. Sleep tracking is
disabled when the device is not on your wrist.
Total sleep time is accumulated during all sleep sessions
that end on a particular day. For example, if you fell asleep
last night and woke up this morning, your sleep duration will
be added to today’s total sleep time.
However, if you fell asleep last night at 10:00 p.m. and
woke up at 11:00 p.m., that hour of sleep would be added
to yesterday’s total sleep time.
NOTE: The total sleep time will update after a brief period
once you wake up.
NOTE: Minimum sleep time for recorded data is
45 minutes.
SLEEP
TRACKER*
*Available only on C410
Total sleep time
10

NOTE: While in the Waking screen, if you fall back asleep the sleep tracker
will continue and the “Sleep ..zZ” message will reappear at the top.
Total sleep time will not update.
Sleep tracking sequence
SLEEP
TRACKER*
*Available only on C410
Sleep tracker is on. Waking screen appears
when movement is
sensed and the tracker
is determining if you are
awake.
Sleep tracker is off. You
are now awake and total
sleep time is updated.
11

VIEW
Press & hold to read your heart rate
Taking your heart rate will help you stay in your workout zones
and help calculate your calories more accurately.
HEART
RATE
1. Wear snugly around your wrist.
2. Gently press and hold VIEW for 3 to 8
seconds until your heart rate appears.
Heart Rate (beats per minute)
% of Maximum Heart Rate
Pulse Indicator
12

VIEW
Press to view:
distance, calories, steps, sleep*
Shows your progress throughout the day with a 24-hour
graph. The bars are scaled to t the data from the
24-hour period.
HOURLY
DISPLAY
From Time,
press MODE until you reach
Hourly Display
*Available only on C410 13

The hourly actigraphy* view provides a summary of your
sleep and activity levels.
Active: Displays your activity levels while
awake. Bars represent three categories:
Normal, Active and Very Active
Sleep: Displays your sleep levels.
Bars represent three categories:
Light, Medium and Deep Sleep.
HOURLY
DISPLAY
Active graph
Sleep graph
*Available only on C410
14

Shows your results for the past 7 days. The bars are scaled
to t the data from the past week.
START/STOP
Press to browse through the past
7 days
WEEKLY
DISPLAY
VIEW
Press to view:
distance, calories, steps, sleep*
From Time,
press MODE until you reach Weekly
Display (“Today” will be shown)
*Available only on C410 15

Records data from an individual workout.
START/STOP
Press to start/stop recording your
workout
Hold to reset data (Workout mode
must be stopped)
WORKOUT
MODE
VIEW
Press to view:
distance, calories, steps
From Time,
press MODE until you reach Workout
16

Copyright © 2014 Salutron, Inc. All rights reserved. Duplication or copying of all or part of this
manual without the express written consent of Salutron, Inc. is prohibited.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and
any use of such marks by LifeTrak is under license. Other trademarks and trade names are those of
their respective owners.