Light Efficient Design RemPhos RP-SSL-1W-40K-BK-GI User manual

LED SOLAR STEP / WALL LIGHT
<1W / 20LM
User Manual

Solar Panel
The switch
Hole
Expansion Pillar-hinge
Screw
LED Light
①
②
③
④
⑤
⑥
Exploded View
Specifications

The light is automatically off
in the daytime while the solar
panel charges.
The light automatically turns on
at night.
Special Note
Do not install the lamp away from the sun, under a shadow or between two
buildings where the height of one building will affect how much light the product
receives. Not installing with enough sunlight will lead to insufficient absorption of
sunlight and insufficient brightness and time;
Do not use the lamp in an environment with a temperature above 113 F or below
32F, otherwise the battery can be permanently damaged.
Do not use non-standard installation accessories to install the lamp. This will void
the warranty.
Please be aware of your location to determine the most optimal mode for your
satisfaction.
3 Working Modes

Keep the device away from fire and oil to avoid any fire or explosion;
No one except professional technicians should attempt to disassemble the light
in order to avoid damaging the light;
It is strictly forbidden to disassemble the battery for personal use;
If the lamp doesn't get charge for 3 days, the battery maybe out of power, you
have to charge it under bright sunlight;
In order to ensure that the lamp works in an ideal state for a long time, please
clean the solar panel regularly according to the local dust conditions, our
suggestion is one time at least half a year.
1. Drill the hole according to the scale plate;
2. Fix the lamp on the wall with screw.
Tips: Keep the solar panel facing the sun
to ensure a quality charge.
Please use the supplied key pin to click the
ON/OFF button from hole to turn on the
light. The light will be off while click the
ON/OFF button one more time.
How to unlock the working system?
by
01.15.2019 Information is subject to change without notice.
Installation
Notice & Warning