Lightolier Calculite C7E17VM CCDW User manual

Calculite®HID Downlight C7E17VM
Page 1 of 2 7" Aperture, ED17 (Enclosed), Ceramic Metal Halide, Medium Beam
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte Thomas Company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2004 Genlyte Thomas Group LLC (Lightolier Division) • A0504
Features
1. Reflector Trim: Clear anodized aluminum, 0.040” (16-ga.). Provides Medium
beam distribution; 50° visual cut-off to lamp and lamp image; self-flange in
painted white or polished to match cone interior. Consult factory for other
finishes.
2. Lamp Guard: High heat resistant glass (as required by code).
3. Socket Cup: Galvanized steel, pre-wired with medium base pulse rated
socket. Snaps onto upper reflector for secure attachment without tools;
assures proper lamp alignment to optics for consistent performance.
4. Mounting Ring: 0.048" (18-ga.) galvanized steel. Designed for vertical
adjustment from above or below for ceilings from 0" to 2" thick. Center-line
notches allow consistent alignment of multiple fixtures.
5. Mounting Frame: 0.048" (18-ga.) galvanized steel includes pre-installed
mounting bars.
6. Retention Springs: Rust resistant springs secure reflector in place for quick,
tool-less installation.
7. Frame Vertical Adjustment Mechanism: Vertical adjustment mechanism
accommodates mounting to virtually any ceiling system using pre-installed
mounting bars, or 1/2" EMT tubing (by others). Single locking feature secures
all adjustments. Alignment holes and markings allow fixture to be pre-set
prior to installation.
8. Mounting Bars: 0.048" (18-ga.) Pre-installed, telescoping bars extend to 30"
long and lock securely into position. Built-in locking tabs provide positive
attachment to common T-bar systems. Self-centering feature simplifies instal-
lation in 24" O.C. grid systems. Attaches to steel or wood joists without
accessories.
9. Ballast: Electronic 120V or 277V. Magnetic dual voltage (120V & 277V).
Accessible from below for inspection and/or replacement without tools.
10.Junction Box: 0.048" (18-ga.) galvanized steel. UL listed for 8 No. 12 AWG,
90°C through branch circuit conductors; allows inspection from below.
11.Thermal Protector: (Not Shown) Meets NEC and UL requirements. Do not
install insulation above nor within 3" (76mm) of any part of the luminaire.
Electrical
Electronic Ballast: 120V or 277V, 50/60 Hz., encased, high-power factor, T.H.D.
<15%, thermally and transient protected, RMI / RFI complies with FCC Part 18
non-consumer equipment, shut-down circuit at end of lamp life, sound rating
"A", -5°F minimum starting temperature, Type 1 outdoor rating.
Electrical (cont)
Ballast ANSI Code Voltage Max. Amps Input Watts
70W MH M98/M143 120/277 0.67/0.28 78
100W MH M90/M140 120/277 0.90/0.43 110
Magnetic Ballast: 120/277V dual voltage, 60 Hz., encased and potted,
HX-HPF circuit type, high power factor, sound rating “B”, -20°F minimum starting
temperature, Type 1 Outdoor rating.
Ballast ANSI Code Voltage Max. Amps Input Watts
70W MH M98/143 120/277 1.90/0.80 94
100W MH M90/140 120/277 2.40/1.10 125
Options and Accessories
Auxiliary: Add suffix Ato Frame-In Kit and Reflector Trim. See Spec.Sheet ”A“.
Emergency Lamp: Add suffix Eto Reflector Trim and Frame-In Kit. See Spec.
Sheet “E”.
Slope Ceiling Adapters: See Specification Sheet SCA.
Fuse (magnetic ballast): Add suffix F1 or F2 to Frame-In Kit (F1=120V, F2=277V)
Chicago Plenum: Consult Factory.
Labels
UL (Suitable for Damp Locations), CSA (magnetic ballast only), I.B.E.W.
For 100W electronic, install fixtures with minimum spacing: 2 feet from
center-to-center of adjacent luminaries; 1/2 inch from top of luminaire to over-
head building member;1 foot from luminaire center to side building member.
Ceiling Cutout: 8" (203mm) Dia.
Reflector Trim Frame-In Kit Lamp (Coated, Ceramic MH)
C7E17VM CLW Specular Clear, White Painted Flange.
CLP Specular Clear, Matching Flange.
CCDW Comfort Clear Diffuse, White Painted Flange.
CCDP Comfort Clear Diffuse, Matching Flange.
CCZW Champagne Bronze, White Painted Flange.
CCZP Champagne Bronze, Matching Flange.
C770MHE1 Electronic 120V 70W ED17, BD17 (Enclosed)
C770MHE2 Electronic 277V 70W ED17, BD17 (Enclosed)
C710MHE1 Electronic 120V 100W ED17, BD17 (Enclosed)
C710MHE2 Electronic 277V 100W ED17, BD17 (Enclosed)
C770MHU Magnetic 120V/277V 70W ED17, BD17 (Enclosed)
C710MHU Magnetic 120V/277V 100W ED17, BD17 (Enclosed)
7-3/8" (187 mm) Dia. 2" (50 mm) max.
Ceiling Thickness
Vertical Adjustment:
5/8" (16 mm) to
2 7/8" (73 mm)
8-5/8" (200 mm) Dia.
Flangless Trim with
9-7/8"
(251 mm)
Top View
(Magnetic Ballast)
18-5/8" (473 mm)
10-7/8" (276 mm)
10-1/2" (267 mm)
8-1/4"
(210 mm)
20" (508 mm) to 30" (762 mm)
9-3/4"
(248 mm)
Top View
(Electronic Ballast)
10-7/8" (276 mm)
9-3/4"
(248 mm)
20" (508 mm) to
30" (762 mm)
11" (280 mm)
(100/150W)

Calculite®HID Downlight C7E17VM
Page 2 of 2 7" Aperture, ED17 (Enclosed), Ceramic Metal Halide, Medium Beam
Lightolier a Genlyte Thomas Company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2004 Genlyte Thomas Group LLC (Lightolier Division) • A0504
Job Information Type:
1,500
750
2,250
3,000
2,250
4,500
30°
60°
30°
60°
70W ED17 (ENCLOSED), PHILIPS COATED MH UNSHIELDED. LUMEN RATING = 6000 LMS., AROMAT CAT, CL FINISH REFLECTOR TRIM.
ANGLE MEAN CP LUMENS
0 5184
5 4618 439
10 3993
15 3481 982
20 2899
25 2453 1117
30 1843
35 1256 808
40 787
45 407 329
50 98
55 42 48
60 32
65 23 19
70 0
75 0 0
80 0
85 0 0
90 0
ZONAL LUMENS AND PERCENTAGES
ZONE LUMENS % LAMP %LUMINAIRE
0-30 2537 42.3 67.82
0-40 3345 55.76 89.41
0-60 3722 62.04 99.48
0-90 3741 62.36 100
40-90 396 6.6 10.59
60-90 19 0.33 0.52
90-180 0 0 0
0-180 3741 62.36 100
LUMINANCE SUMMARY - CD. / SQ. M.
ANGLE MEAN CD/SQ M
45 23288
55 2932
65 2213
75 0
85 0
** EFFICIENCY = 62.4% ** CERTIFIED TEST REPORT NO. 2518FR, DATE: MAR 6, 2004
SC = .7 COMPUTED BY LSI PROGRAM **TEST-LITE**
CEILING 80% 70% 50% 30%
WALL 70 50 30 10 50 10 50 10 50 10 0
RCR0 .74 .74 .74 .74 .73 .73 .69 .69 .66 .66 .62
1 .71 .70 .68 .67 .69 .66 .66 .64 .64 .62 .59
2 .68 .66 .64 .62 .65 .61 .63 .60 .61 .59 .56
3 .65 .62 .59 .57 .61 .57 .60 .56 .58 .55 .53
4 .63 .59 .56 .54 .58 .53 .57 .53 .56 .52 .51
5 .60 .56 .52 .50 .55 .50 .54 .49 .53 .49 .48
6 .58 .53 .49 .47 .52 .47 .51 .47 .51 .46 .45
7 .55 .50 .46 .44 .49 .44 .49 .44 .48 .43 .43
8 .52 .47 .44 .42 .47 .41 .46 .41 .45 .41 .40
9 .50 .44 .41 .39 .44 .39 .44 .39 .43 .38 .38
10 .48 .42 .39 .36 .42 .36 .41 .36 .41 .36 .35
LUMINAIRE INPUT WATTS = 78.0
Coefficients of Utilization
Zonal Cavity Method - Effective Floor Cavity Reflectance = 20%
100W ED17 (ENCLOSED), PHILIPS COATED MH UNSHIELDED. LUMEN RATING = 9000 LMS., AROMAT, CL FINISH REFLECTOR TRIM.
ANGLE MEAN CP LUMENS
0 7771
5 6922 659
10 5985
15 5217 1471
20 4344
25 3675 1672
30 2760
35 1879 1208
40 1176
45 606 490
50 141
55 57 67
60 43
65 30 25
70 0
75 0 0
80 0
85 0 0
90 0
ZONAL LUMENS AND PERCENTAGES
ZONE LUMENS % LAMP %LUMINAIRE
0-30 3802 42.25 67.99
0-40 5010 55.68 89.6
0-60 5567 61.86 99.55
0-90 5592 62.14 100
40-90 581 6.46 10.4
60-90 25 0.28 0.45
90-180 0 0 0
0-180 5592 62.14 100
LUMINANCE SUMMARY - CD. / SQ. M.
ANGLE MEAN CD/SQ M
45 34641
55 4040
65 2833
75 0
85 0
** EFFICIENCY = 62.1% ** CERTIFIED TEST REPORT NO. 2519FR, DATE: MAR 6, 2004
SC = .7 COMPUTED BY LSI PROGRAM **TEST-LITE**
CEILING 80% 70% 50% 30%
WALL 70 50 30 10 50 10 50 10 50 10 0
RCR0 .74 .74 .74 .74 .72 .72 .69 .69 .66 .66 .62
1 .71 .69 .68 .67 .68 .66 .66 .64 .63 .62 .59
2 .68 .66 .63 .62 .64 .61 .62 .60 .61 .58 .56
3 .65 .62 .59 .57 .61 .57 .60 .56 .58 .55 .53
4 .63 .59 .56 .53 .58 .53 .57 .53 .55 .52 .51
5 .60 .55 .52 .50 .55 .50 .54 .49 .53 .49 .48
6 .57 .53 .49 .47 .52 .47 .51 .47 .50 .46 .45
7 .55 .50 .46 .44 .49 .44 .48 .44 .48 .43 .42
8 .52 .47 .44 .41 .46 .41 .46 .41 .45 .41 .40
9 .50 .44 .41 .39 .44 .39 .43 .39 .43 .38 .37
10 .47 .42 .39 .36 .42 .36 .41 .36 .41 .36 .35
LUMINAIRE INPUT WATTS = 110
Coefficients of Utilization
Zonal Cavity Method - Effective Floor Cavity Reflectance = 20%
1,125
3,375