Lightolier Calculite C6T6A-MHT6RF User manual

20" to 30"
10-5/8"
15"
19-5/8"
22-1/8" (Magnetic)
20-1/4" (Electronic)
19-1/8"
Top View
7" (176 mm) Dia.
5 3/4" (146 mm) Dia.
Calculite® HID Adjustable Accent C6T6A-MHT6RF
Page 1 of 2 6" Aperture, T6 Ceramic Metal Halide, Flood
Features
1. Flood Upper Reflector: Specular textured aluminum; provides 40° beam.
Interchangeable with 12° Spot (MHT6RS) and 25° Narrow Flood (MHT6RNF);
see spec sheets C6T6A-MHT6RS and C6T6A-MHT6RNF.
2. Trim Kit:: Low brightness aperture cone; anodized aluminum, self-flanged in
painted white or aperture-matching polished flange. Consult factory for other
finishes.
3. Lamp Shield: High-temperature glass as required by code; captive during
re-lamping.
. Trim Kit Adjustment Mechanism: Provides 40° vertical tilt, 360° horizon-
tal rotation; lockable. EZ-Aim Helical Drive System provides fast and accu-
rate hot aiming with Philips screwdriver.
5. Socket Housing: Galvanized steel, pre-wired with G12 pulse rated socket.
Snaps onto yoke for secure attachment without tools; unitized construction
assures proper alignment of lamp to optics for consistent optical perfor-
mance.
6. Frame Housing: Steel, 0.029" (22-Ga.), matte black finish. Removable cover
for top re-lamping.
7. Frame Vertical Adjustment Mechanism: Accommodates mounting to vir-
tually any ceiling system using pre-installed mounting bars, or 1/2" EMT tub-
ing (by others). Single locking feature secures all adjustments. Alignment
holes and markings allow fixture to be pre-set prior to installation. Final
adjustment can be made from below from inside fixture.
8. Mounting Bars: Galvanized steel, 0.04 " (1 -ga.), pre-installed telescoping
bars extend to 30" long and lock securely into position. Built-in locking tabs
provide positive attachment to common T-bar systems. Self-centering feature
simplifies installation in 24" O.C. grid systems. Attaches to steel or wood
joists without accessories.
9. Retention Springs: Rust resistant springs secure trim for quick, tool-less
installation.
10.Ballast / Cover Assembly: Accessible from below and removable without
tools for inspection and ballast replacement .
11.Junction Box: 0.059" (16-ga.) galvanized steel. UL listed for No. 12 AWG,
90°C through branch circuit conductors. Allows inspection from below.
12.Accessory Holder: (Not Shown) Sold separately catalog # CAH6; die-
formed steel, matte black finish, slide-in installation. Accepts up to two
4 3/4" dia. media.
13.Thermal Protector: (Not Shown) Meets NEC and UL requirements. Do not
install insulation above nor within 3" (76mm) of any part of the luminaire.
Electrical
Electronic Ballast: 120V or 277V, 50/60 Hz., encased, high power factor, T.H.D
<15%, thermally and transient protected, RMI/RFI complies with FCC Part 1 on-
consumer equipment, shut-down circuit at end of lamp life, sound rating “A”,
-5°F (-20°F for 150W) minimum starting temperature, Type 1 outdoor rating.
Ballast ANSI Code Voltage Max. Amps Input Watts
39W MH M130 120/277 0.39/0.17 44
70W MH M139 120/277 0.67/0.2 7
150W MH M142 120/277 1.40/0.60 167
Options and Accessories
Chicago Plenum: Consult Factory
Fuse (magnetic ballast): Add suffix F1 or F2 to Frame-In Kit (F1=120V, F2=277V)
Labels
UL (Suitable for Damp Locations), CSA, I.B.E.W.
For 150W, install fixtures with minimum spacing between:
1. Center-to-center of adjacent luminaries: 2 feet.
2. Top of luminaire to overhead building member: 1/2 inch.
3. Luminaire center to side building member: 1 foot.
C6A39T6E1 Electronic 120V 39W T6 Ceramic MH
C6A39T6E2 Electronic 277V 39W T6 Ceramic MH
C6A70T6E1 Electronic 120V 70W T6 Ceramic MH
C6A70T6E2 Electronic 277V 70W T6 Ceramic MH
C6A15T6E1 Electronic 120V 150W T6 Ceramic MH
C6A15T6E2 Electronic 277V 150W T6 Ceramic MH
Flood Upper
Reflector
Ceiling Cutout: 6 9/16" (167mm) Dia.
For Complete Fixture Order: Trim Kit + Upper Reflector (MHT6RF) + Frame-In Kit. Each Sold Separately.
Trim Kit + Flood Upper Reflector Frame-In Kit Lamp
C6T6A + MHT6RF (Flood Upper Reflector)
CLW Specular Clear, White Painted Flange
CLP Specular Clear, Matching Flange
CCDW Comfort Clear Diffuse, White Painted Flange
CCDP Comfort Clear Diffuse, Matching Flange
CCZW Champagne Bronze, White Painted Flange
CCZP Champagne Bronze, Matching Flange
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (50 ) 679- 131 • Fax (50 ) 674-4710
We reserve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC • B0406

30° Aiming Angle
Horizontal Surface
DC FC LW
8' .6' 1 6 6.3' 5.3'
10' 5.8' 9 7.9' 6.6'
12' 6.9' 65 9. ' 7.9'
15' 8.7' 2 11.8' 9.9'
20' 11.5' 23 15.7' 13.2'
30° Aiming Angle
Vertical Surface
DC FC LW
3' 5.2' 200 9.1' 3. '
' 6.9' 113 12.2' .6'
6' 10. ' 50 18.3' 6.9'
8' 13.9' 28 2 . ' 9.2'
12' 20.8' 13 36.5' 13.8'
Calculite® HID Adjustable Accent C6T6A-MHT6RF
Page 2 of 2 6" Aperture, T6 Ceramic Metal Halide, Flood




(FC) is initial footcandles at center of
beam. Beam length (L) and beam width
(W) are to where the candlepower is
reduced to 50% of the center beam
candlepower. (C) is the distance to the
center of the beam.
30°
60°
30°
60°
30°
60°
1,125
2,250
3,375
,500
2,000
,000
6,000
8,000
3,750
7,500
11,250
15,000




CANDLEPOWER DISTRIBUTION
30° Aiming Angle
Vertical Surface
DC FC LW
2' 3.5' 139 .9' 2.0'
3' 5.2' 62 7. ' 3.0'
' 6.9' 35 9.8' .0'
6' 10. ' 15 1 .7' 6.0'
8' 13.9' 9 19.6' 8.0'
ANGLE WALL 39W T6 - FLOOD UPPER REFLECTOR
0828
5 1125
10 1 8
15 2129
20 3032
25 3951
30 8
35 0 2
0 3092
5 200
50 1365
55 80
60 357
65 109
70 12
75 0
80 0
85 0
90 0
30° Aiming Angle
Horizontal Surface
DC FC LW
8' .6' 80 6.5' 5.5'
10' 5.8' 51 8.1' 6.8'
12' 6.9' 36 9.8' 8.2'
15' 8.7' 23 12.2' 10.3'
20' 11.5' 13 16.3' 13.7'
30° Aiming Angle
Vertical Surface
DC FC LW
3' 5.2' 110 9.6' 3.6'
' 6.9' 62 12.9' .7'
6' 10. ' 27 19.3' 7.1'
8' 13.9' 15 25.7' 9.5'
12' 20.8' 7 38.6' 1 .2'
ANGLE WALL 70W T6 - FLOOD UPPER REFLECTOR
0 2129
5 2598
10 3 16
15 621
20 5826
25 7165
30 7886
35 7331
0 5692
5 0 0
50 25
55 1262
60 60
65 113
70 12
75 2
80 0
85 0
90 0
ANGLE WALL 150W T6 - FLOOD UPPER REFLECTOR
0 326
5 588
10 6230
15 8522
20 11273
25 13598
30 1 10
35 127 8
0 9706
5 658
50 7 0
55 3021
60 1 51
65 3
70 71
75 15
80 15
85 15
90 15
LAMP: 150W T6 MH, PHILIPS
LUMEN RATING: 1 000 LMS.
CBCP: 1 10
Beam Angle: 32
AROMAT 150W ELECTRONIC BALLAST
DATE: MAR 11, 200
CERTIFIED TEST REPORT NO. 2533FR
COMPUTED BY LSI PROGRAM
**TEST-LITE**
AIMED 30 deg. TOWARD WALL
LAMP: 70W T6 MH, PHILIPS
LUMEN RATING: 6600 LMS.
CBCP: 7886
Beam Angle: 33
AROMAT 70W ELECTRONIC BALLAST
DATE: MAR 13, 200
CERTIFIED TEST REPORT NO. 2527FR
COMPUTED BY LSI PROGRAM
**TEST-LITE**
AIMED 30 deg. TOWARD WALL
LAMP: 39W T6 MH, PHILIPS
LUMEN RATING: 3 00 LMS.
CBCP: 8
Beam Angle: 28
AROMAT 39W ELECTRONIC BALLAST
DATE: MAR 9, 200
CERTIFIED TEST REPORT NO. 2528FR
COMPUTED BY LSI PROGRAM
**TEST-LITE**
30° Aiming Angle
Horizontal Surface
DC FC LW
6' 3.5' 80 .1' 3.5'
8' .6' 5 5. ' .6'
10' 5.8' 29 6.8' 5.8'
12' 6.9' 20 8.1' 6.9'
15' 8.7' 13 10.2' 8.6'
Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (50 ) 679- 131 • Fax (50 ) 674-4710
We reserve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC • B0406
Job Information Type: