Lightolier H9S2GLR1FT User manual

Features
• 72.9% efficient.
• Direct/indirect appearance with soft contoured interior.
•Lens encloses lamp compartment.
• Translucent DR acrylic high light transmission linear prismatic lens.
• Tension screws secure ends to body.
• Same fixture fits both G and T ceiling types.
• Fits flush to face of slot grid (T) ceiling types.
• Lamp shield opens from either side.
• 95% reflective specular aluminum reflector.
• Ballast accessible from room side.
• Built-in earthquake clips.
•Can be continuous row mounted.
• Wiring access plate standard.
• Optional DALI ballast i GEN TECHNOLOGY accepts digital dimming
controllers, scene controllers and automatic control devices.
• Construction to meet NYC Code or Chicago Plenum available.
Mounting Methods Dimensions
HP90 Recessed Fluorescent H9S2GLR1FT
Page 1 of 2 Direct/Indirect – 2' x 2' with Acrylic Linear Prismatic Lens
Static, 1 Lamp TT5
exposed slot t-grid ceiling
Acoustical
material
by others
1-7/8"
max.
Exposed T-bar
by others
9/16"
24"
built-in earthquake clips
24" (610mm)
5"
(127mm)
5" (127mm)
2-1/2"
(64mm)
2" x 2-1/2" Access Plate
with (2) 7/8" dia. K.O.
24" (610mm)
fully enclosed lamp compartment
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Volts/Ballast:
For Factory Technical Information: [phone] • Fax [phone]
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
www.lightolier.com © Philips Group Section 5/Folio M32-16 Rev. A
exposed t-grid ceiling
Exposed T-bar
by others
1-1/2"
max.
Acoustical
material
by others
15/16" *
24"
* For flush mounting when using 9/16" Exposed T-Grid
ceiling system consult factory
* If emergency pack or 2nd ballast are used access is gained through the
adjacent ceiling tile.

HP90 Recessed Fluorescent H9S2GLR1FT
Page 2 of 2 Direct/Indirect – 2' x 2' with Acrylic Linear Prismatic Lens
Static, 1 Lamp TT5
Ordering Information
Explanation of Catalog Number. Example: H9S2GLR1FTUNVPR
Options/Accessories
Fusing: Internal fast blow fusing: SUFFIX: A.
Internal slow blow fusing: SUFFIX: C.
Drywall Kit: Order Catalog Number: FK92X2.
Electrical Wiring Options: Consult factory.
For motion or light sensor: See Folio OA20-10.
Specifications
Performance: In an installation of 1 lamp 40W luminaires in a room cavity ratio of 1,
with reflectance 80% ceiling, 50% wall, 20% floor, the C.U. shall not be less than .96.
To reduce glare the average brightness at 65° shall not exceed 2617 candelas per square
meter. To control veiling reflections, luminaire output in the 30°-90° zone shall not be
less than 69.5%.
Materials: Chassis parts are die-formed code gauge steel.
Lamp Shield: Linear prismatic translucent DR acrylic lens.
Finish: Chassis exterior – baked white acrylic enamel. Cavity – baked flat white
acrylic enamel. Rust preventative undercoating. Reflector – low iridescence specular
aluminum 95% reflectance.
Specifications (Continued)
Electrical: Thermally protected class “P’ ballast C.B.M. approved, non PCB. If K.O. is
within 3" of ballast, use wire suitable for at least 90°.
UL Listed for damp locations.
Labels: I.B.E.W./UL and ULc Listed.
This product may have a mercury containing lamp. Manage in accord with Disposal
Laws. See: www.lamprecycle.org
Options:
Add appropriate suffix
to catalog no., ie: (A)
HP90
Direct/Indirect
Recessed
S
Body Style:
S= Static
2
Fixture
Width
G
Ceiling Type:
Fits both
Standard Grid
and
Slot Grid
L
Acrylic Lens
FT
Lamp:
(By Others)
R
Reflector:
Specular
Aluminum
1
Lamp
Quantity
1=1 Lamp
Ballast Type:
<10THD
1 Lamp Elec. TT5 IB**
(40 Watt)
1 Lamp Elec. TT5 PR†
(40 Watt)
1 Lamp Elec. TT5 BP
(50 Watt)
1 Lamp Elec. TT5 BF*
(55 Watt)
LOL Dimming TT5 PB
*Instant Start Standard.
Other dimming options. Consult factory.
NOTE:
For TT5 40W UNV, you must use PR Ballast Code.
†Program Rapid Start
0.0 45.0 90.0 FLUX
0 876 876 876
5 868 872 876 83
15 836 841 845 238
25 776 776 772 357
35 685 665 646 416
45 560 518 528 410
55 400 373 413 348
65 230 248 318 260
75 97 149 195 155
85 19 24 19 31
90 222
Model No. H9S2GLR1FTUNVPR
LER = FP - 61.2 IW - 37.55 BF - 1.0
Comparative yearly lighting energy cost per
1000 lumens = $3.92
Report Number: G2006149
Catalog Number: H9S2GLR1FTUNVPR
Lamps: F40BX/SPX30/IS
Luminaire: HP90 2' x 2' with linear
prismatic lens.
Ballast: C240PUNVHP-B/UNV
Report is based on 3150 Lumens per lamp.
Efficiency: 72.9%
CIE Type-Direct-Indirect
Plane: 0-Deg 90-Deg
Spacing Criteria: 1.2 1.2
Shielding Angles: 90 90
Plane: 0-Deg 90-Deg
Luminous Length: 22.800 22.800
CANDELA DISTRIBUTION0
AVERAGE AVERAGE AVERAGE AVERAGE
IN DEG. 0-DEG. 45-DEG. 90-DEG.
45 2174. 2011. 2049.
55 1914. 1789. 1976.
65 1494. 1611. 2065.
75 1029. 1580. 2068.
85 598. 765. 598.
LUMINANCE DATA IN CANDELA/SQ. METER
COEFFICIENTS OF UTILIZATION –
ZONAL CAVITY METHOD. EFFECTIVE
FLOOR CAVITY REFLECTANCE 0.200
RC 80 50 30
RW 70 50 30 50 30 10 50 30 10
01 80 76 73 71 69 67 69 67 65
02 73 67 62 63 59 56 60 57 54
03 66 59 53 55 51 47 53 49 46
04 61 52 46 49 44 40 48 43 40
05 56 47 40 44 39 35 43 38 40
06 52 42 36 40 35 31 39 34 30
07 48 38 32 37 31 27 36 31 27
08 45 35 29 34 28 24 33 28 24
09 42 32 26 31 26 22 30 25 22
10 39 30 24 29 24 20 28 23 20
ZONE LUMENS % LAMP % FIXT
00-030 678 21.5 29.5
00-040 1093 34.7 47.6
00-060 1851 58.8 80.6
00-090 2296 72.9 100.0
90-180 0000 0.0 000.0
00-180 2296 72.9 100.0
ZONAL LUMEN SUMMARY
Voltage:
120, 277 or
UNV=120-277
H9 Standard HP90
HY For NYC Code – I.B.E.W. Manufactured
Job Information Type:
For Factory Technical Information: [phone] • Fax [phone]
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
www.lightolier.com © Philips Group Section 5/Folio M32-16 Rev. A