Lightolier Lytespan 8266 User manual

Lightolier is a Philips group brand
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • A0708
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lytespan Track Lighting System 8266
Page 1 of 1 Theatrical Low Voltage Lytespot
Features
1. Transformer: Electronic. 120V 60Hz input for 20-50W load. .95 power factor.
2. Track Attachment Fitting: Molded polycarbonate; rotates into track?
3. Brass Contact: Extends for connection to second circuit (Advent Lytespan
track only)
4. Transformer Housing: Die cast aluminum
5. Yoke: Steel
6. Lamp Holder: Housing steel. Rotates lamp 90°.
7. Hinge: Allows lamp holder housing to open for re-lamping while staying
attached to housing.
8. Housing: Aluminum no open holes.
9. Spade Terminals: Brass with silicone rubber insulators. Fastens to lamp
terminals.
Finish
All Painted finishes are baked enamel.
Dimming
Use only dimmers specifically designed for use with electronic transformers.
Low voltage fixtures may produce audible sound when dimmed.
Accessories
One AF3 Diffusion or AL3 Series
Labels
UL Listed
Ordering Information
Catalog Number Finish Mounting Lamps
8266BK Black For use with Lytespan Basic, Advent, and Radius Track. Not compatible with
extension wands or sloped ceiling adapters.
12V PAR36 50W Max
(Not included)
3 7/8
(98 mm)
1 3/4 Hx 1 1/4W
44mmH x 32mmW
4 3/16 x 1 1/32W
3 7/16 DIA.
5 5/8 DIA.
4 5/16 DIA.
106mm x 26mmW
(44mm)
(127mm)
5 1/8
8 7/16
1 3/4
3 3/8
3
8
6
3
1
9
7
4
5
9
(86mm)
(143mm)
(110mm)
(130mm)
(87mm)
(214mm)
(229mm)