Lightolier SL205B User manual

Job Information Type:
Job Name:
Cat. No.:
Notes:
SL205B
Decorative, Spectral, Floating Paper, Optic Forms
Page 1 of 3
Ceiling Cutout: 6 1⁄16" (167mm)
Ordering Guide (2 Part System: Trim and Frame-In-Kit)
Trim Frame-In-Kit Lamp Volt Finish
SL205BT S6132BU 1-26/32W TTT 120/277V Clear acrylic with white lacquer lens
and stainless steel trim ring.
S6132B-347 1-26/32W TTT 347V
*Use 4100K lamp for optimal white lens rendering.
1 ⅛" MAX.
(29mm)
6 ⅞"
(175mm)
7 ⅞"
(200mm)
6 ⅛"
(156mm)
11 ⅛"
(283mm)
13 ⅝"
(346mm)

SL205B
Decorative, Spectral, Floating Paper, Optic Forms
Page 2 of 3
Job Information Type:
1 ⅛" MAX.
(29mm)
6 ⅞"
(175mm)
7 ⅞"
(200mm)
6 ⅛"
(156mm)
11 ⅛"
(283mm)
13 ⅝"
(346mm)
Features
1. Reflector: Specular aluminum, 16 ga. Comfort Clear low
iridescence finish.
2. Lens: 1 ⅛" (29mm) thick clear acrylic finished with a
translucent diffused coating.
3. Trim Ring: 12 ga. aluminum. Stainless steel finish.
4. Socket Cup: Heat dissipating die-cast aluminum. Positive
locking attachment, without tools, to reflector assures proper
optical alignment of lamp.
5. Mounting Frame: Die-cast aluminum suitable for dry
ceilings.
6. Retaining Springs: Rust resistant springs simplify reflector/
housing removal for inspection and maintenance.
7. Mounting Brackets: 16 ga. steel. Use 18" (457mm)
mounting bars (optional) or with standard ¾" (19mm), 1 ½"
(38mm) lathing channels (by others) or ½" (13mm) tubing (by
others). Adjust vertically from inside of fixture.
8. Junction Box: 14 ga. steel, 4" (102mm) x 3 ½" (89mm x 2"
(51mm) box, allows inspection from below. UL “c/us” listed for
through branch circuit wiring with maximum of 8 no. 12, 90º C
conductors.
9. Screws: Stainless steel, Philips head.
Mounting
Recessed, Non-IC Type (non thermal insulation contact).
Luminaire Weight: 5 lbs.
Electrical
Ballast: Electronic Program Rapid Start T4 quad lamp ballast.
Universal voltage “U” ballast automatically detect 120 volts or
277 volts operation. No visible flicker on starting, internally
fused and protection circuit for lamp end of life. Sound rated “A”.
Designed for removal without tools from inside of luminaire for
easy field inspection or service replacement.
TE: 26/32W TTT non-dimming
PM: 26/32W TTT Powerspec dimming HDF by Lightolier-
Controls
TQ: 26/32W TTT MARK-10 dimming by Advance
Lampholder: GX24q-3 base, 4 Pin.
Options and Accessories
Mounting Bars:
1950, set of 2, 18" (457mm) long.
1951, set of 2, 30" (762mm) long.
T-Bar Anchor Clips:
1956, set of 4, for anchoring mounting bars to T-Bar runners.
Labels
cULus Listed. Suitable for wet locations.

SL205B
Decorative, Spectral, Floating Paper, Optic Forms
Page 3 of 3
Philips Lightolier
e: [email protected]
t: [phone]
w: www.lightolier.com
SL205B February 23, 2012
Specifications are subject to change without notice.
© Koninklijke Philips Electronics N.V., 2012.All rights reserved.
Job Information Type:
Report No: LSC8923
Cat. No: SL205BTEU
1 x 32W TTT at 2400 lumens
Efficiency:39%
Spacing Ratio: 1.2
60°
30°
0º
83
110
55
180º
90°
28
Room Cavity Ratio
Coefficients Of Utilization - Zonal Cavity Method
Effective Floor Cavity Reflectance = .20
RC 80 70 50 30 10 0
RW 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0
0 .46 .46 .46 .46 .45 .45 .45 .45 .43 .43 .43 .41 .41 .41 .39 .39 .39 .39
1 .42 .41 .39 .38 .41 .40 .39 .37 .38 .37 .36 .37 .36 .35 .35 .35 .34 .33
2 .39 .36 .34 .32 .38 .36 .33 .32 .34 .32 .31 .33 .32 .30 .32 .31 .30 .29
3 .36 .32 .30 .27 .35 .32 .29 .27 .31 .28 .27 .30 .28 .26 .29 .27 .26 .25
4 .33 .29 .26 .24 .33 .29 .26 .24 .28 .25 .23 .27 .25 .23 .26 .24 .23 .22
5 .31 .26 .23 .21 .30 .26 .23 .21 .25 .22 .20 .24 .22 .20 .24 .22 .20 .19
6 .28 .24 .20 .18 .28 .23 .20 .18 .23 .20 .18 .22 .20 .18 .21 .19 .15 .17
7 .26 .21 .18 .16 .26 .21 .18 .16 .20 .18 .16 .20 .17 .15 .19 .17 .15 .15
8 .24 .19 .16 .14 .24 .19 .16 .14 .19 .16 .14 .18 .16 .14 .18 .15 .14 .13
9 .23 .18 .15 .12 .22 .17 .14 .12 .17 .14 .12 .17 .14 .12 .16 .14 .12 .12
10 .21 .16 .13 .11 .21 .16 .13 .11 .16 .13 .11 .15 .13 .11 .15 .13 .11 .10
Determined in accordance with current IES published procedures
Luminaire input watts = 35.0
Candlepower summary
Angle Mean Lumens
0 365
5 365 35
10 363
15 355 100
20 341
25 323 148
30 300
35 275 171
40 244
45 214 165
50 185
55 158 141
60 128
65 97 97
70 70
75 49 52
80 31
85 14 15
90 1
Zonal Lumens and Percentages
Zone Lumens %Lamp %Fixt
0-30 283 11.81 30.64
0-40 454 18.92 49.10
0-60 760 31.67 82.17
0-90 925 38.54 100.00
40-90 470 19.62 50.90
60-90 164 6.87 17.83
90-180 0 0.00 0.00
0-180 925 38.54 100.00
ROOM SURFACE REFLECTANCES
80% Ceiling; 50% Wall; 20% Floor
2400 Lumens Per Lamp
RCR = 1 (Rm. width = 10 x mtg. ht. above work plane)
RCR = 5 (Rm. width = 2 x mtg. ht. above work plane)
RCR = 10 (Rm. width = mtg. ht. above work plane)
10 20 30 40 50 60 70 80 90
This quick calculator chart determines the number and spacing of 1 lt. - 32W TTT units
with Clear Alzak reflector, for any level of illumination.
AREA PER FIXTURE IN SQUARE FEET
CENTER TO CENTER DISTANCE OF FIXTURES IN FEET
INITIAL FOOTCANDLES
60
50
40
30
20
10
4 5 6 7 8 9 10
Quick Calculator
◄
◄
◄