Lightolier Calculite C6E17OVW User manual

Calculite®HID Downlight C6E17OVW
Page 1 of 2 6” Aperture, ED17 (Open Rated), Ceramic Metal Halide, Wide Beam
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte Thomas Company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2004 Genlyte Thomas Group LLC (Lightolier Division) • A0504
Features
1. Upper Reflector: Clear anodized aluminum, 0.040" (16-ga.). Provides wide
beam distribution.
2. Aperture Cone: Provides 50° visual cut-off to lamp and lamp image; self-
flange in painted white or aperture-matching polished flange. Consult
factory for other finishes.
3. Socket Cup: Galvanized steel, pre-wired with medium base pulse rated socket.
Snaps onto upper reflector for secure attachment without tools; unitized con-
struction assures proper lamp alignment to optics for consistent performance.
4. Mounting Frame: 0.048" (18-ga.) galvanized steel includes pre-installed
mounting bars.
5. Mounting Ring: 0.048" (18-ga.) galvanized steel. Designed for vertical
adjustment from above or below for ceilings from 0" to 2" thick. Center-line
notches allow consistent alignment of multiple fixtures.
6. Aperture Cone Retention Springs: Rust resistant springs secure cone in
place for quick, tool-less installation.
7. Frame Vertical Adjustment Mechanism: Vertical adjustment mechanism
accommodates mounting to virtually any ceiling system using pre-installed
mounting bars, or 1/2" EMT tubing (by others). Single locking feature secures
all adjustments. Alignment holes and markings allow fixture to be pre-set
prior to installation.
8. Mounting Bars: 0.048" (18-ga.) Pre-installed, telescoping bars extend to 30"
long and lock securely into position. Built-in locking tabs provide positive attach-
ment to common T-bar systems. Self-centering feature simplifies installation in
24" O.C. grid systems. Attaches to steel or wood joists without accessories.
9. Ballast: Electronic 120V or 277V. Magnetic dual voltage (120V & 277V).
Accessible from below for inspection and/or replacement without tools.
10. Junction Box: 0.048" (18-ga.) galvanized steel. UL listed for 8 No. 12 AWG,
90°C through branch circuit conductors; allows inspection from below.
11. Thermal Protector: (Not Shown) Meets NEC and UL requirements. Do not
install insulation above nor within 3" (76mm) of any part of the luminaire.
Electrical
Electronic Ballast: 120V or 277V, 50/60 Hz., encased, high-power factor,
T.H.D. <15%, thermally and transient protected, RMI / RFI complies with FCC
Part 18 non-consumer equipment, shut-down circuit at end of lamp life, sound
rating "A", -5°F minimum starting temperature, Type 1 outdoor rating.
Electrical (cont)
Ballast ANSI Code Voltage Max. Amps Input Watts
70W MH M98/M139 120/277 0.67/0.29 78
100W MH M90/M140 120/277 0.90/0.43 110
Magnetic Ballast: 120/277V dual voltage, 60 Hz., encased and potted,
HX-HPF circuit type, high power factor, sound rating “B”, -20°F minimum starting
temperature, Type 1 Outdoor rating.
Ballast ANSI Code Voltage Max. Amps Input Watts
70W MH M98/M143 120/277 1.90/0.80 94
100W MH M90/M140 120/277 0.90/0.43 125
Options and Accessories
Auxiliary: Add suffix A to Frame-In Kit and Reflector Trim. See Spec.Sheet “A/E”
Emergency Lamp: Add suffix E to FIK and Reflector Trim. See Spec.Sheet “A/E”
Slope Ceiling Adapters: See Specification Sheet SCA.
Fuse (magnetic ballast):Add suffix F1 or F2 to FIK (F1=120V F2=277V)
Chicago Plenum: Consult Factory.
Labels
UL (Suitable for Damp Locations), CSA, I.B.E.W.
Ceiling Cutout: 6 9/16” (167 mm) Dia.
Reflector Trim Frame-In Kit Lamp (Coated, Ceramic MH)
C6E17OVW CLW Specular Clear, White Painted Flange.
CLP Specular Clear, Matching Flange.
CCDW Comfort Clear Diffuse, White Painted Flange.
CCDP Comfort Clear Diffuse, Matching Flange.
CCZW Champagne Bronze, White Painted Flange.
CCZP Champagne Bronze, Matching Flange.
C670MHOE1 Electronic, 120V 70W E17, ED17, BD17 (Open Rated)
C670MHOE2 Electronic, 277V 70W E17, ED17, BD17 (Open Rated)
C610MHOE1 Electronic, 120V 100W E17, ED17, BD17 (Open Rated)
C610MHOE2 Electronic, 277V 100W E17, ED17, BD17 (Open Rated)
C670MHOU Magnetic, 120V/277V 70W E17, ED17, BD17 (Open Rated)
C610MHOU Magnetic, 120V/277V 100W E17, ED17, BD17 (Open Rated)

60° Zonal Cavity Method - Effective Floor Cavity Reflectance = 20%
Zonal Cavity Method - Effective Floor Cavity Reflectance = 20%
Calculite®HID Downlight C6E17OVW
Page 2 of 2 6” Aperture, ED17 (Open Rated), Ceramic Metal Halide, Wide Beam
Lightolier a Genlyte Thomas Company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2004 Genlyte Thomas Group LLC (Lightolier Division) • A0504
Job Information Type:
ANGLE MEAN CP LUMS.
0 2543
5 2498 238
10 2444
15 2470 698
20 2462
25 2345 1058
30 1990
35 1373 860
40 742
45 264 249
50 19
55 3 6
60 1
65 0 0
70 0
75 0 0
80 0
85 0 0
90 0
ZONAL LUMENS AND PERCENTAGES
ZONE LUMENS % LAMP %LUMINAIRE
0-30 1993 34.98 64.12
0-40 2854 50.07 91.78
0-60 3109 54.55 99.99
0-90 3109 54.56 100.00
40-90 255 4.48 8.22
60-90 0 0 0.01
90-180 0 0 0
0-180 3109 54.56 100.00
70W ED17 PHILIPS COATED METAL HALIDE LAMP-3K. LUMEN RATING = 5700 LMS, ELECTRONIC AROMAT BALLAST, CL FINISH REFLECTOR
LUMINANCE SUMMARY - CD. / SQ. M.
ANGLE MEAN CD/SQ M
45 20520
55 307
65 0
75 0
85 0
** EFFICIENCY = 54.6% CERTIFIED TEST REPORT NO. 2540FR, DATE: NOV 8, 2003
SC = 1.0 S/MH = 1.2
COMPUTED BY LSI PROGRAM **TEST-LITE**
CANDLEPOWER DISTRIBUTION
ANGLE MEAN CP LUMS.
03630
5 3549 338
10 3446
15 3421 968
20 3365
25 3154 1445
30 2817
35 2083 1284
40 1192
45 448 417
50 68
55 19 25
60 8
65 5 5
70 2
75 0 1
80 0
85 0 0
90 0
100W ED17 PHILIPS COATED METAL HALIDE LAMP-3K LUMEN RATING = 8500 LMS. ELECTRONIC BALLAST, CL FINISH REFLECTOR
LUMINANCE SUMMARY - CD. / SQ. M.
ANGLE MEAN CD/SQ M
45 34835
55 1782
65 658
75 0
85 0
** EFFICIENCY = 52.7% ** CERTIFIED TEST REPORT NO. 2338FR, DATE: OCT 19, 2003
SC = 1.1 S/MH = 1.2
COMPUTED BY LSI PROGRAM **TEST-LITE**
CANDLEPOWER DISTRIBUTION
ZONAL LUMENS AND PERCENTAGES
ZONE LUMENS % LAMP %LUMINAIRE
0-30 2751 32.37 61.37
0-40 4034 47.47 90.01
0-60 4477 52.67 99.88
0-90 4482 52.74 100
40-90 447 5.27 9.99
60-90 5 0.06 0.12
90-180 0 0 0
0-180 4482 52.74 100
CEILING 80% 70% 50% 30%
WALL 70 50 30 10 50 10 50 10 50 10 0
RCR
0 .63 .63 .63 .63 .61 .61 .59 .59 .56 .56 .53
1 .60 .59 .58 .56 .58 .56 .55 .54 .54 .52 .50
2 .57 .55 .53 .52 .54 .51 .53 .50 .51 .49 .47
3 .55 .52 .50 .48 .51 .47 .50 .47 .49 .46 .44
4 .52 .49 .46 .44 .48 .44 .47 .43 .46 .43 .42
5 .50 .46 .43 .41 .45 .41 .44 .40 .44 .40 .39
6 .48 .43 .40 .38 .43 .38 .42 .38 .41 .38 .37
7 .45 .40 .38 .35 .40 .35 .39 .35 .39 .35 .34
8 .43 .38 .35 .33 .37 .33 .37 .33 .37 .32 .32
9 .40 .35 .32 .30 .35 .30 .35 .30 .34 .30 .29
10 .38 .33 .30 .28 .33 .28 .32 .28 .32 .28 .27
LUMINAIRE INPUT WATTS = 110
Coefficients of Utilization
CEILING 80% 70% 50% 30%
WALL 70 50 30 10 50 10 50 10 50 10 0
RCR
0 .65 .65 .65 .65 .63 .63 .61 .61 .58 .58 .55
1 .62 .61 .60 .59 .60 .58 .58 .56 .56 .54 .52
2 .60 .57 .55 .54 .56 .53 .55 .52 .53 .51 .49
3 .57 .54 .52 .50 .53 .49 .52 .49 .51 .48 .46
4 .55 .51 .48 .46 .50 .46 .49 .45 .48 .45 .44
5 .52 .48 .45 .43 .47 .43 .46 .42 .46 .42 .41
6 .50 .45 .42 .40 .45 .40 .44 .40 .43 .40 .39
7 .47 .43 .40 .38 .42 .37 .41 .37 .41 .37 .36
8 .45 .40 .37 .35 .40 .35 .39 .35 .39 .34 .34
9 .42 .37 .34 .32 .37 .32 .37 .32 .36 .32 .31
10 .40 .35 .32 .30 .35 .30 .34 .30 .34 .30 .29
LUMINAIRE INPUT WATTS = 78
Coefficients of Utilization
1,250
625
1,875
2,500
30°
1,750
3,500
30°
60°
875
2,625