Lightolier Lytespan 6173 User manual

Lytespan®Track Lighting System 6173
Page 1 of 1 Alcyon HID Monopoint for 70W
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • B0908
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier is a Philips group brand
Features
1. Basic Lytespan Track Strip: Die-cast with high-temperature impact-
resistant thermoplastic insulator, supporting electrical contacts. Accepts
Lytespan luminaires for individual applications.
2. Junction Box Canopy: Aluminum low-profile canopy, attached with two
painted slotted cap screws (provided).
3. Crossbar: 0.074 steel, permanently fixed to track. Provides secure mounting
of monopoint to electrical junction box.
4. Supply Leads: 16ga. White and Black, Green; insulated stranded wire.
5. Locking Slot: Accepts mechanical locking tab from Alcyon HID luminaire.
Electrical
Capacity is 120volts, 60Hz, 660W max. All Lytespan Track luminaires are polar-
ized and continuously grounded throughout. Electrical conductors are concealed
in an insulating liner. Intended for wiring to branch circuit building wire with
ground. All wiring must be in accordance with National and Local Codes.
Use 90°C minimum supply wire to monopoint.
Finish
All Painted finishes are baked enamel.
Labels
UL listed, cULus
Ordering Information
Catalog No. Finish Junction Box Mounting Compatibility
6173WH
6173BK
6173AL
Matte White
Matte Black
Matte Aluminum
4" & 3 ½" Octagonal, 4" & 3 ½" Round Alcyon HID 70W: 23S70 Series and 23F70 Series. Also compatible with Alcyon
Low and Line Voltage. Lytespan luminaires with single track mounting point.
Not campatible for luminaires with adapter type 8171 and 6296.
Junction Box
(by others)
ceiling
or wall
ceiling
or wall
¼"
7mm
4 ½"
114mm
8 7⁄8"
225mm
2 ¼"
57mm
2 ¼"
58mm
3 ¼"
83mm
2 ¾"
70mm
3 ½" Dia. J-Box
Mounting Slots
5
2
1
3