Lightolier Lytespan 8632AL User manual

Lytespan®Accent Lighting System 8632AL
Page 1 of 1 LyteJacks Lytedrops/Coaxial Braided Cable
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC • A0206
Features
1. Male Connector
2. Locking Screw-In Plug
3. Splicing/Wiring Chamber: Brushed Aluminum.
4. Metallic Braided Cable: 6' Field cuttable.
5. Die-Cast Aluminum Husk: With circular brim for support of shade.
Brushed Finish.
6. Glass Lamp Guard: Satin finish, for effective light diffusion.
7. Wire Nuts
8. Socket Base
9. Bi-Pin Round Socket
10. Spring
11. Heat Vents
12. Fuse/Fuse Holder: 5 AMP replaceable.
Electrical
Bi-Pin ceramic socket, 6.35mm pin spacing (see lamp above). Pre-wired with
18AWG electrical cable, and covered with braided cable. Braided cable serves
as one of the circuits conductors.
8632AL
Catalog No. Length Mounting Finishes Use With PowerJack Lamps (Not Included)
8632AL 6' Field Cuttable To all Power Jacks Brushed AL Track 8610WH, BK
Track 8611WH, BK
Track 8610EWH, BK
Track 8611EWH, BK
Remodeler 8612EWH, BK
Recessed 8613WH, BK
Points 8605WH, BK
Remote Transformers 8608, 8609
12V 20W, 35W T4 Bi-Pin Base
GY 6.35 (Tungsten-Halogen)
Lightolier No. 56361 35W
Lightolier No. 56360 20W
Finish
Brushed Metallic.
Labels
UL; CUL.
1 3/4"
SP-8632
SPEC SHEET
ARTWORK
SECTION VIEW
1
2
3
7
12
4
5
89
11
6
10