
PB2A7050
03/02
PB2A705EBTL = (Trimless) Black
PB2A705EWTL = (Trimless) White
5"
13/4"
10" L X 5" W Opening
O.C.
17 3/8" L X 10" W
8 3/4"
Depth
5
6
810
11 12
123
4
17"
20 1/8"
13" 8" 7
9
13
Top View
Flanged Trimless
Calculite®ProSpec®Linear Downlight PB2A7050
Page 1 o 2 2 Light AR 70 Series B
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Features
1. Aperture Frame: Provides clean support or lamp holders and overlapping
lange or trimless installation. Extruded aluminum. Rigidly welded together
on all corners.
2. Media Cartrid e: Allows convenient loading and removal o up to one
accessory. Easily installed and removed or lamping with a simple twisting
motion. Constructed o ormed aluminum.
3. Adjustable Rin : Allows 360° horizontal and 45° (on width) and 45° (on
length) vertical adjustment.
4. Tortiontite Sprin : For easy installation o aperture rame.
5. Housin : Die- ormed 22 ga. steel. Finish: Black.
6. Mountin Brackets: Adjustable vertically rom outside o housing.
7. Thermal Protector: Meets NEC, UL , and CSA requirements.
8. Lampholder: Double contact bayonet base with 250°C #18 gauge Te lon®
leads.
9. Junction Box: 14 ga. steel, 4" x 3 1/2" x 2" box. Allows inspection rom
below.
10.Lamp and Accessory Support: .032" steel, lared or easy entry o Media
Cartridge.
11.Lens Retainin Rin : .093" spring steel rod. Holds accessories in place.
12.Lamp Guard: Heat-resistant clear glass. Lamp manu acturers requirement.
13.Transformer Housin : Die- ormed 18 ga. steel.
Electrical
Electronic Transformers: O er reliable operation and are accessible rom
below or servicing. 12V. Secondary 50 VA. each lamp.
Dimmin Controls: Use only dimmers speci ically designed or use with
electronic trans ormers. Low Voltage ixtures may produce audible sound when
used with dimmers, which may be objectionable in acoustically critical areas.
UL/cUL listed or through branch circuit wiring with maximum o (8) no. 12 AWG,
90°C.
Ceilin Cutout: 11 1/16”L x 6 3/16”W
Orderin Information: AR 70 Series B
Cat. No. Lamp Ceilin Trim Aperture Finish
PB2A705EBL (2) 50W AR 70 Overlap Black with White Flange
PB2A705EWL (2) 50W AR 70 Overlap White with White Flange
PB2A705EBTL (2) 50W AR 70 Trimless Black
PB2A705EWTL (2) 50W AR 70 Trimless White
Finish
All painted inishes are powder coated baked enamel.
Options & Accessories
Accessories: 2 1/2" dia. series, ilters, lenses, screens and louvers. (2)
accessories maximum, including lamp cover glass. Lamp guard glass may be
replaced with solid glass accessory.
Labels
UL/cUL (Suitable or Damp Location), I.B.E.W.
PB2A705EBL = (Flanged) Black/White
PB2A705EWL = (Flanged) White
Te lon®is a registered trademark o E.I. DuPont.
Li htolier a Genlyte Company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details o design, materials and inish.
© 2011 Genlyte Group LLC • C0711
Add a “1” or 120v or “2” or 277v at the end o the catalog number or voltage