Lightolier LLC2 series User manual

LLC2 Series
COMBINATION THERMOPLASTIC LED EXIT
Page 1 of 2
Job Information Type:
Job Name:
Cat. No.:
Notes:
Features
Illumination: Emergency
illumination is provided by
two high-performance lamp
reflector systems integral to
the product housing. Each lamp
head can be positioned on
top, side or “in-between.” The
standard lamp reflector system
incorporates a high-intensity
5.4 W, T-5 wedge base
tungsten lamp. Illumination of
the exit face is accomplished
with long-lasting, high-output
Light Emitting Diodes (LEDs)
without hot spots or striations.
Housing: Impact-resistant, UL
94 5 VA thermoplastic housing
with NFPA-compliant field-
selectable chevrons. Chevrons
can be installed/removed
from outside the exit housing.
Thermoplastic backplate
is provided with mounting
knockouts for easy installation
to standard junction boxes.
Installation is further simplified
by the use of snap-together
backplate and housing. Canopy
is furnished with all models.
Operating Temperature
Range: Damp Location
50°F (10°C) to 104°F (40°C)
Electronics: 120/277 VAC
dual voltage input with surge-
protection, solid-state circuitry
provides for a reliable charging
system. Charging system is
complete with low voltage
disconnect, AC lockout,
brownout protection, AC
indicator lamp and test switch.
Electrical Specifications:
Red:
0.027 A (120 VAC)
0.012 A (277 VAC)
Green:
0.030 A (120 VAC)
0.013 A (277 VAC)
Code Compliance
UL 924 and UL damp location
listed. NFPA 101, NEC, BOCA,
OSHA and IBC illumination
standards.
Warranty
Three year full electronics
warranty. One year full plus
four year prorated lead calcium
battery warranty.
LLC2UR
21.62"
(54.9 cm)
16.3"
(41.4 cm)
4.63"
(11.8 cm)
1.0"
(2.5 cm)
5.9"
(15.0 cm)
10.12"
(25.7 cm)
15.62"
(39.7 cm)

LLC2 Series
COMBINATION THERMOPLASTIC LED EXIT
Page 2 of 2
Philips Lightolier
e: [email protected]
t: [phone]
w: www.lightolier.com
LLC2 Series September 11, 2012
Specifications are subject to change without notice.
© Koninklijke Philips Electronics N.V., 2012.All rights reserved.
Job Information Type:
Ordering Information
Series
LLC2 = LLC Series
II Combination
Emergency Exit
LLC2
U= Universal
Stencil Faces
R= Red
G= Green
Letter Color
SD = Self-Diagnostics
12R = 12 W Remote Capability1,2
Factory Installed Options
Note
1) 12R not available with SD. For remote lamp heads, see remote heads specification sheet.
2) 12R only available in white housing.
U
B= Black
W= White
Stencil Face/Housing Color