Commercial Electric 5018-WH User manual

□□
1
Installation
2
Use a drywall saw (not included) and the included template
to cut a hole in your install location. Then route your
cables through the opening in the wall.
PREPARING THE INSTALL LOCATION ROUTING THE CABLES
Installation Guide
Low Voltage Recessed Cable Plate
Item #640816
Model #5018-WH
PACKAGE CONTENTS
(1) Low Voltage Recessed Cable Plate
TOOLS NEEDED
Drywall Saw
#2 Phillips head screwdriver
Pencil
Route your low voltage cables through the opening in the back of
the Low Voltage Recessed Cable Plate and out through the front
of the Plate.
RoHS Compliant
This product is patent protected by
U.S. Patent number: 7390964
□□
3 4
Secure the Low Voltage Recessed Cable Plate to the wall
using a Phillips head screwdriver to tighten the attached
screws with wings.
INSTALLING THE PLATE INSTALLATION COMPLETE
Installation is complete. You can now connect your home theater
devices and equipment.
For video information visit homedepot.com and search SKU 640816 or model number 5018-WH
Scan Me
*The use of power tools is not recommended

RoHS Compliant
This product is patent protected by
U.S. Patent number: 7390964
CAUTION: When using tools always follow the
manufacturer’s safety guidleines.
Please read all instructions and safety information before use.
Retain this manual for future reference.
Template
Item #640816
Model #5018-WH
4-1/16”
2-5/16”
CUT ALONG DOTTED LINE 
ACTUAL SIZE
Template