Lightolier Lytecaster 2090 User manual

Lightolier is a Philips group brand
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2011 Philips Group • H0711
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lytecaster®Recessed Downlighting 2090
Page 1 of 1 3 3/4" Aperture Flush Glass Wet Location Trim
5 3/16"
5 3/16"
1/4"
4 5/8"
2 7/8"
1" MAX.
2090/2002P1
Standard Incandescent
2090/2003R
0™ NON-IC
Remodeler Ring
Features
1. Housing: Hydroformed aluminum, .040 thk. min. Non-yellowing, gloss
white powder coat finish for permanent reflectivity and surface protection.
2. Trim Flange: Frosted clear polycarbonate flange ring. Pull down and
release for toolless relamping.
3. Frame-In Kit: (2002P2 standard frame shown) Other frames shown
below. See Frame-In Kit specification sheets for more details.
4. Glass: Processed borosilicate glass textured diffuser. Smooth surface on
exposed side for wipe down cleaning. Meets NEC®requirements for spas
and hot tubs. May be installed less than 7' 6" above max water surface
height.
Labels
UL (Suitable for Wet Locations - Covered Ceilings only), I.B.E.W.
NEC® is a registered trademark of the National Fire Protection Association.
Complete Fixture consists of Reflector Trim & Frame-In Kit. Select each separately.
Reflector Trim Frame-In Kit — See Individual Frame-In Kit Specification Sheets
Line Voltage
Frame-In Kit Installation Type Lamping Height
2090 2000P1 Standard Non-IC 50W PAR20 5 1/4"
2002P1 Standard Non-IC 5 3/16"
2003R Non-IC Remodeler 5 3/16"
2000IC IC 50W PAR20 5 1/4"
2000AIC IC AirSeal® 5 1/4"
5 1/4"
~
2090/2000IC
0™
Standard Incandescent IC
1
2
4
3