CALIVE TITAN I User manual

0122 0123
Warning
TITAN I
Warranty
TITAN I
1. The installation should be performed by qualified electricians or technicians.
2. Before conducting any installation, maintenance, or removal, the luminaires should
be powered off and cooled down.
3. Do not touch the fixture while it is turned on.
4. If there are any issues with the fixture, do not power off and attempt to repair
it unless you are a qualified technician, electrician, or customer service member.
GROWHYPER product is covered by a 5 year limited warranty. GROWHYPER
grow light warrants to the original purchaser that this product is free from
defects in materials and workmanship for the period of 5 years from date of
purchase. To obtain warranty service please contact your local distributor or sales
rep for further instruction.
CALIVE LLC reserves the right to update all product
data sheets at any time. Consult CALIVE marketing
specialists for publication updates at [email protected]
Copyright©2021–2022 CALIVE LLC,
All Rights Reserved.
1460 Park Avenue.
Emeryville, CA 94608 USA
www.calivellc.com
CALIVE
GROW LIGHT
TITAN I
600W
Total PPF: 1,680 μmol/s
380 430 480 530 580 630 680 730 780
POWER 600W
INPUT VOLTAGE 100–277V
DIMMING 0–10V Dim (Meanwell)
FIXTURE DIMENSIONS 37.1" L x 4.7" W x 7.6" H
LED CHIPS Lumleds + Prolight (660nm)
LED EFFICACY 2.8μmol/J Total PPF: 1,680μmol/s

0124 0125
Installation Guide
TITAN I
01.
Fix the brackets onto the driver box.
02.
Fix the driver box onto the upside of
the fixture.
03.
Attach the Y-Hangers.
04.
Connect the fixture to AC power
source and dimming device.
Please open the cable
connector cap before you
connect the cable.
Connect
Cable Connector Cap
AC Power Soure
Dimming Device