Lil' Jumbl Baby Wipe Warmer User manual

Baby Wipes
Warmer
Thank you for purchasing the Lil' Jumbl Baby Wipes Warmer. This User
Guide is intended to provide you with guidelines to ensure that
operation of this product is safe and does not pose risk to the user.
Any use that does not conform to the guidelines described in this
User Guide may void the limited warranty.
Please read all directions before using the product and retain this
guide for reference. This product is intended for household use only.
This product is covered by a limited one-year warranty. Coverage is
subject to limits and exclusions. See warranty for details.
Introduction
This Baby Wipe Warmer is designed to work with most brands of baby
wipes, warming them up for a more soothing application to baby’s
sensitive skin. It is not intended to make wipes hot.
Safety Precautions
When using electrical appliances, basic safety precautions should
always be followed, including the following:
• Use this product only for its intended purpose. Do not use unit
to warm any other objects.
• Keep out of reach of children.
• Do not use in an oxygen-enriched environment or near
equipment that stores or emits oxygen.
• Do not immerse any part of the product in water or other liquids.
• Do not use the product in a humid environment or near water.
Specifications
Voltage: DC 6V
Power: 10W
Dimensions: 9.4" x 6.8" x 4.7"
Weight: 1.8 lbs.
This product is covered by a limited one-year warranty. Coverage is
subject to limits and exclusions. See warranty for details.
Customer Service:
[e-mail]
866-849-3049
Distributed by
C & A Marketing
2 Bergen Turnpike
Ridgefield Park, NJ 07660
[e-mail]
Made in China
Lil' Jumbl is a trademark of
C&A IP Holdings, LLC
©2015 All rights reserved
• Do not expose the product to direct sunlight, heat sources, or
open flames.
• Do not attempt to disassemble the product.
• Do not cover or obstruct the product when in use.
• To conserve energy, unplug the unit during prolonged periods
of non-use.
• Do not use outdoors.
General Operation
• Place the warmer a flat, stable surface.
• Moisten the cotton warming pad and place it into unit.
• Insert a stack of (about 80) pop-up style or standard folded wipes.
For pop-up wipes, open the dispenser lid, and gently push the top
wipe up through the opening.
• Close both lids.
• Plug one end of the AC adapter power cord into the unit and the
other end into a standard household AC outlet. The LED light will
turn on to indicate that the product is working.
• Allow about 3 hours for the unit to warm up to its sustained
temperature of 104° (40° C). Note: Baby wipes will be warm, not
hot, to the touch.
Tips
• When using in a cold room, use wipes immediately after removing
them from the unit.
• Keep the cotton warming pad moist. Failure to do so will dry out or
discolor the baby wipes. About every 2 weeks, rinse the pad and
let it air dry.
• Replace the cotton warming pad after 3 months. If not using the
warming pad, make sure to add a small amount of water at the
bottom of the unit to prevent wipes from drying out.
• If the cotton pad changes color, remove it from warmer and clean.
Cleaning / Maintenance
• Wipe gently with water and mild detergent and dry with a
soft cloth.
• Do not immerse the unit in water or other liquid.
• Do not use harsh cleaning agents on the unit.