Lilin PSD4624EX20 User manual

1
Summary
LILIN’s PSD4624E Series are Full HD fast dome IP cameras that adopt the latest compression technologies to
provide Quadruple Streaming of H.264 and MJPEG in different resolutions. The Quadruple Streaming
technology allows transmitting digital video at various bitrates and frame rates to fit both high and low
bandwidth network environment.
The built-in intelligent video analytics engine enables audio and motion detection for extra protection.
Other useful features include two-way audio, SD card recording, smartphone live access, email snapshot,
and continuously sending JPEG snapshots to an FTP server. Moreover, these features are highly compatible
with other applications.
The PSD4624E Series support cutting-edge technologies such as video de-interlacing, built-in video
analytics, and ONVIF compliance. With LILIN Navigator, this H.264 Full HD fast dome IP camera will provide
the best integrated system solution in migrating to IP Video application.
Key Features
Capability of recording at 60 FPS
Supports various encoding formats (H.264 and MJPEG)
Multiple Streaming technology, supporting 4 concurrent streams
Supports Android, iPad, and iPhone live monitoring
Audio and motion detection for notifications via email or FTP
IVA alarm notifications via email or FTP
Two-way audio (audio models only)
Network time protocol (NTP) supported
DDNS and UPnP supported
Supports LILIN HTTP API
Supports PCM/G.711 audio streaming
Supports ONVIF protocol
Supports LILIN Navigator
Trademark Acknowledgments
Microsoft, Windows 2000, Windows XP, Windows Vista, Windows 7, ActiveX, and Internet Explorer are
registered trademarks of Microsoft Corporation in the U.S. and/or other countries.
Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun
Microsystems, Inc. in the United States and other countries. Flash, Macromedia, and Macromedia Flash
Player are either trademarks or registered trademarks of Adobe Systems Incorporated in the United States
and/or other countries.
Linux and DynDNS are registered trademarks of the respective holders.
Intel, Pentium, and Intel® Core™ 2 Duo are registered trademarks of Intel Corporation.

2
FFmpeg is a trademark of Fabrice Bellard, originator of the FFmpeg project.
QuickTime and the QuickTime logo are trademarks or registered trademarks of Apple Computer, Inc., used
under license there from.
Other names of companies and their products mentioned in this manual may be trademarks or registered
trademarks of their respective owners.
Other References
Smartphone
For smartphone live monitoring, please visit appendix for more details.
LILIN Universal ActiveX Control
Sample codes and supporting document are included in the product CD and can be downloaded from our
official website.
LILIN HTTP API
For non-ONVIF integration, please see LILIN HTTP API document. We adopt HTTP API document for all LILIN
IP cameras.
Caution
Do not drop or strike this equipment
Do not install the equipment near any naked flames or heat sources
Do not expose this unit to rain, moisture, smoke or dust environment
Do not cover the opening of the cabinet with cloth and plastic or to install this unit in poor ventilated
places. Allow 10cm between this unit and its surroundings
Do not continue to operate the unit under abnormal conditions such as detection of smoke, strange
smell or no display on screen while power is turned on
Do not touch the power connection with wet hands
Do not damage the power cord or leave it under pressure
Do not operate this unit near magnet, speaker system, etc., to avoid unnecessary magnetic
interference
Connection cables should be grounded properly

3
Table of Contents
Chapter 1 System Overview.............................................................................................................................................. 6
Chapter 1-1 System Requirements ............................................................................................................................... 6
Chapter 1-2 Software Requirements ............................................................................................................................ 6
Chapter 2 Before Accessing IP PTZ Cameras..................................................................................................................... 7
Chapter 2-1 Configuring IP Addresses Using the IPScan Utility .................................................................................... 7
Chapter 2-2 Configuring IP Addresses through HTML Connection............................................................................... 8
Chapter 2-3 Internet Browser Setting & Software Component Required.................................................................... 8
Chapter 2-4 Login.......................................................................................................................................................... 8
Chapter 3 LILIN IP PTZ Camera Operations....................................................................................................................... 9
Chapter 3-1 IP PTZ Operational HTML Page ................................................................................................................. 9
Chapter 3-2 PTZ Control Panel...................................................................................................................................... 9
Chapter 3-2-1 Vertical and Horizontal Direction Controls...................................................................................... 11
Chapter 3-2-2 ePTZ ................................................................................................................................................. 11
Chapter 3-2-3 Control Panel ...................................................................................................................................12
Chapter 4 Basic Settings.................................................................................................................................................. 14
Chapter 4-1 System..................................................................................................................................................... 14
Chapter 4-1-1 General [Path: Basic>> System>> General] .....................................................................................14
Chapter 4-1-2 User [Path: Basic>> System>> User]................................................................................................ 15
Chapter 4-1-3 Timer [Path: Basic>> System>> Timer] ............................................................................................ 16
Chapter 4-2 Video/Audio ............................................................................................................................................16
Chapter 4-2-1 Video General Setting [Path: Basic>> Video/Audio>> General] ...................................................... 16
Chapter 4-2-2 Video Quality Tuner [Path: Basic>> Video/Audio>> Quality Tuner]................................................ 18
Chapter 4-3 Network ..................................................................................................................................................21
Chapter 4-3-1 General [Path: Basic>> Network>> General] ................................................................................... 21
Chapter 4-3-2 General IPv6 [Path: Basic>> Network>> IPv6] .................................................................................22
Chapter 4-3-3 HTTP/RTSP Service [Path: Basic>> Network>> HTTP/RTSP Service]................................................ 22
Chapter 4-3-4 DDNS [Path: Basic>> Network>> DDNS]..........................................................................................23
Chapter 4-3-5 SNMP [Path: Basic>> Network>> SNMP]......................................................................................... 24

4
Chapter 4-4 Maintenance ...........................................................................................................................................24
Chapter 4-5 PTZ........................................................................................................................................................... 25
Chapter 4-5-1 Lens Advance Setting [Path: Basic>> PTZ>> Advance>> Lens Advance]..........................................25
Chapter 4-5-2 Auto Scan Setup [Path: Basic>> PTZ>> Advance>> Auto Scan Setup]............................................. 25
Chapter 4-5-3 Tour Setup [Path: Basic>> PTZ>> Advance >> Tour Table]..............................................................26
Chapter 4-5-4 Patrol Setup [Path: Basic>> PTZ>> Advance>> Patrol Setup] ..........................................................27
Chapter 4-5-5 PTZ Schedule Settings [Path: Basic>> PTZ>> Schedule]................................................................... 27
Chapter 5 Advanced Mode .............................................................................................................................................27
Chapter 5-1 System..................................................................................................................................................... 27
Chapter 5-1-1 System Log [Path: Advance>> System>> System Log]..................................................................... 28
Chapter 5-2 Video/Audio Setting................................................................................................................................ 28
Chapter 5-2-1 Privacy Mask [Path: Advance>> Video/Audio>> SPD Privacy Mask solution] ................................. 28
Chapter 5-2-2 Audio Adjust [Path: Video/Audio>> Audio Adjust].......................................................................... 29
Chapter 5-3 Network ..................................................................................................................................................30
Chapter 5-3-1 Multicast [Path: Advance>> Network>> Multicast]......................................................................... 30
Chapter 5-3-2 IP Address Filtering [Path: Advance>> Network>> IP Address Filtering]......................................... 31
Chapter 5-3-3 UPnP [Path: Advance>> Network>> UPnP] .....................................................................................31
Chapter 5-3-4 Bonjour [Path: Advance>> Network>> Bonjour] .............................................................................31
Chapter 5-3-5 SDDP/Heratbeat [Path: Advance>> Network>> SDDP/Heratbeat] ................................................. 32
Chapter 5-4 Event ....................................................................................................................................................... 32
Chapter 5-4-1 Motion Detection [Path: Advance>> Even>> Motion Detection].................................................... 33
Chapter 5-4-2 Audio Detection [Path: Advance>> Event >> Audio Detection] ......................................................34
Chapter 5-4-3 Alarm Detection [Path: Advance>> Event>> Alarm Detection]....................................................... 34
Chapter 5-4-4 Network Detection [Path: Advance>> Event>> Network Detection] .............................................. 35
Chapter 5-5 Notification .............................................................................................................................................35
Chapter 5-5-1 FTP Service [Path: Advance>> Notification>> FTP Service] .............................................................35
Chapter 5-5-2 SMTP Service [Path: Advance>> Notification>> SMTP Service] ......................................................36
Chapter 5-5-3 HTTP POST Service [Path: Advance>> Notification>> HTTP POST Service] .....................................36
Chapter 5-5-4 SD Card Service [Path: Advance>> Notification>> SD Card Service]................................................37

5
Chapter 5-5-5 SD Card Backup File [Path: Advance>> Notification>> SD Card Backup File] ..................................37
Chapter 5-6 PTZ........................................................................................................................................................... 38
Chapter 5-6-1 RS-485 [Path: Advance>> PTZ>> RS-485].........................................................................................38
Appendix .........................................................................................................................................................................39

6
Chapter 1 System Overview
Chapter 1-1 System Requirements
LILIN’s IP PTZ Cameras H.264 video compression technology can provide high compression rate and
superior video quality. However, video performance highly depends on both CPU computational
power of a client PC and the network bandwidth for video streaming. The following sections specify
the software requirements for using the H.264 LILIN IP PTZ Cameras.
Chapter 1-2 Software Requirements
Merit LILIN Universal ActiveX software components or QuickTime are required for a web browser to
display MJPEG or H.264 video. When you first log in to our IP camera, you may see a prompt box as
below:
Click Install and follow the onscreen instructions to install necessary components.

7
Chapter 2 Before Accessing IP PTZ Cameras
Before accessing to the IP PTZ camera, make sure that the camera’s RJ-45 network cable, audio cable,
and IP PTZ camera’s power cable are properly installed. For IP address setup, please consult your
network administrator for available IP addresses. The default IP address of IP camera is 192.168.0.200.
User can also use the default IP address to verify IP camera’s network connection.
Chapter 2-1 Configuring IP Addresses Using the IPScan Utility
To configure the IP address of your cameras, download IPScan from our official website:
http://www.meritlilin.com/webe/html/download. Or, you can execute the IPScan installer from the
installation CD directly. To change the IP address, subnet mask, gateway, or HTTP port of your cameras,
follow the steps below:
Run the IPScan utility.
Click Refresh. All available devices will be listed on the screen.
Select the device item from the device list.
To edit or modify IP address, subnet mask, gateway, or HTTP port, use the box.
Click Apply for the changes to take effect.
Click Refresh again to verify the changed settings.
Note: Make sure your IPScan is version 1.0.0.52 or above.

8
Chapter 2-2 Configuring IP Addresses through HTML Connection
To change the IP address using the HTML protocol, you need to enter the default IP address,
192.168.0.200, in your Internet browser and follow the steps below:
Log in to your LILIN IP camera using the default username admin and default password pass.
Click Setup→Network to edit or modify IP address, subnet mask, gateway, or HTTP port.
Click Submit for the changes to take effect.
Chapter 2-3 Internet Browser Setting & Software Component Required
Make sure your Internet browser allows signed ActiveX plug-in to run on your PC. Set Download
signed ActiveX controls to Prompt and enable Run ActiveX controls and plug-ins. You can do this in
Internet Explorer→Tools→Internet Options→Security→Custom Settings.
Once completed, you can access the IP PTZ camera’s live video by entering the default IP address into
your web browser. A security warning dialog box will appear. Click OK to download the ActiveX directly
from the IP PTZ camera.
Chapter 2-4 Login
You can log in to the camera as administrator or guest.
The default usernames and passwords for
administrator are:
Administrator
username
admin
Password
pass
Then press Submit to log in.

9
Chapter 3 LILIN IP PTZ Camera Operations
When logged in as an administrator, two main features are available: 1) camera operations and 2)
configurations.
Chapter 3-1 IP PTZ Operational HTML Page
1. Quick buttons—IP camera control panel
2. ActiveX display screen—Display RTSP H.264 or MJPEG network video
3. Profile switching menu—Switching from one profile to another
4. Setup menu—IP camera setup menu
5. PTZ control panel
Chapter 3-2 PTZ Control Panel
Zoom In
Zoom Out
Zoom Speed
Focus Far
Focus Near
Focus Speed
Auto Focus
Focus Mode
Auto Pan Start
Auto Pan Stop
Auto Pan Mode
Flip 180
Go to preset
position
Auto Recovery
If the IP PTZ camera idles for a period of time, the selected function
will be activated automatically.
Lens Setup
Lens Function Setup

10
PTZ Setup
PTZ Function Setup
Preset Setup
Preset Position Setup
Auto Recovery drop-down options
Home Position: Specify a home position for one of the presets.
Self Return Time: If the IP PTZ camera idles after the chosen
time period, the selected function will be activated
automatically.
Self Return Mode: Return to home position in modes such as
home position, auto scan mode, tour mode, or patrol mode.
Users are able to set an operation mode to ensure all-day
monitoring. In the Return Mode, if the IP Fast Dome Camera
idles for a period of time, the selected function will be activated
automatically. The Return Mode allows constant and accurate
monitoring to avoid the Dome Camera from idling or missing
events.
Lens Setup drop-down options
Focus sensitivity: Auto focus sensitivity.
Digital Zoom: Enable digital zoom after the optical zoom is
exhausted.
Preset Position: Set the camera to Auto-Focus (AF) or Manual-
Focus (MF) when the camera performs preset operations.
Pan-Tilt Movement: Set the camera to Auto-Focus (AF) or
Manual-Focus (MF) when the camera performs Pan-Tilt
movements.
PTZ setup drop-down options
Turbo Speed: When this function is turned on, the speed of
preset position operations will be boosted (360 degrees per
second).
Vertical Operate Angle: Select the camera vertical angle to be
90 or 180 degrees.
Flip Function: Turn on or off the flip function.
Vertical Down limit Flip: Turn horizontal flip on or off when
running vertically to 90 degrees.
Notice:
1. When the vertical operating angle is set to 180 degree, the PTZ
horizontal flip function will be closed automatically.
2. When the vertical operating angle is set to 90 degrees, the PTZ
horizontal flip function will restore to the previous settings.

11
Preset Setup drop-down options
A total of 256 preset positions can be programmed for the IP PTZ
camera. Please refer to the instructions below to configure preset
positions. To set up a preset point, first move the cursor to the PTZ
control panel. Then move to the desired position by using the pan,
tilt and zoom buttons. Next, assign a number for the current
position from the drop-down Preset Point list. Then assign a Dwell
Time and Speed for the current position from the drop-down
menus. Click Save for the changes to take effect.
Chapter 3-2-1 Vertical and Horizontal Direction Controls
Two modes are available for moving the camera vertically and horizontally. The details are described
below:
3-2-1-1 Directional buttons control Pan-Tilt
As shown in the image to the left, eight arrow buttons and
speed options are provided to move around the camera. Select
the moving speed from the drop-down menu, and press any
arrow to move the fast dome network camera. The greater the
Speed number is, the quicker the camera will move.
3-2-1-2 Mouse control PTZ
As shown in the image to the left, a pop-up menu will appear
when you right-click on the screen. Choose PTZ Control to enter
the mouse control mode. Click and hold the mouse and move
around the screen to control the camera according to your
mouse movement. The moving speed depends on the distance
between the center of the screen to the cursor: When the
distance is short, the camera moves slowly; when the distance
is long, the camera moves rapidly.
Chapter 3-2-2 ePTZ
The ActiveX control provides an ePTZ (electronic Pan, Tilt, and Zoom) feature. To perform an ePTZ
operation, hold and drag your mouse across the screen.

12
Move your cursor to the PIP window and drag inside it to perform ePan and eTilt actions. The scroll
wheel can be used to zoom in and zoom out.
Chapter 3-2-3 Control Panel
The quick control panel buttons are described below:
Snapshot: Take a snapshot of the video.
Recording to the PC.
Pause recording to the PC.
Audio on: Turn audio on (audio models only).
Speak on: Turn on to speak to the remote site (audio models only).
Switch screen
Chapter 3-2-3-1 Two-way Audio (for audio model only)
To activate two-way audio, please click the microphone icon to speak to the remote site.
To stop speaking to the remote site, please click the microphone icon again.
To listen to the remote site, please click the speaker icon.
To stop listening to the remote site, please click the speaker icon again.

13
Chapter 3-2-3-2 Record in a Local PC
To record videos to a local PC, first right-click on the LILIN Universal ActiveX control. Choose
Setting to specify the recording paths and recording sizes, and choose Recording On to start
recording. Please make sure that the ePTZ or ROI feature is disabled before trying to open the
setting menu.

14
Chapter 4 Basic Settings
As an administrator, you can configure the IP camera via a standard HTML webpage. Click Setup at the
top-right corner of the screen after you log in to the camera.
Chapter 4-1 System
Chapter 4-1-1 General [Path: Basic>> System>> General]
Under System Settings→General, you will see server system information, such as MAC address,
firmware version, user settings, and system time settings. To modify these options, follow the below
instructions.
MAC Address: Network MAC address of the IP PTZ camera.
Firmware Version: You are allowed to upgrade IP PTZ camera’s firmware remotely.
Pan Firmware/Tilt Firmware/Camera Firmware Version: Check if the firmware is up-to-date.
OS version: Check if the device is up-to-date.

15
System Reboot Time: The last time your system was rebooted
Device Name: The device name can be found using the IPscan utility, which allows you to
identify IP cameras. To change the device name, enter a new name for the IP camera and click
Submit.
Display Device Name: Enable/disable to display/hide IP PTZ camera device name.
Display Timer: Enable/disable to display/hide camera time on the OSD.
Display PTZ OSD: Enable/disable to display/hide IP PTZ currently angle information on the OSD.
Display Auto Pan OSD: Enable/disable to display/hide IP PTZ Auto-Pan or Self-Run running or
not on the OSD.
ActiveX OSD Display: Enable/disable to display/hide the ActiveX OSD Name.
ActiveX OSD Name: The name you enter here will be displayed on the top-right corner of the
ActiveX screen.
Web Title Name: Enter the name to be displayed on the web browser.
Chapter 4-1-2 User [Path: Basic>> System>> User]
Our camera supports up to 10 user accounts. Each account can be individually configured for access
rights. To add/edit a user, click Add/Edit User. To access an IP camera without authentication,
switch the Bypass Logon option to On. Enable IPScan Bypass Logon to log in the camera through
IPScan without authentication.
To add a user, press Add User, and you will see the following screen:
Enter the account name and password for the new account, and then check to assign the access
rights for this account.
To edit account information, click Edit User. To delete a user, click Remove User. Click Submit to
update the settings.

16
Chapter 4-1-3 Timer [Path: Basic>> System>> Timer]
You can change the time of your camera through a HTML web page. Simply select the date and time
in the drop-down menus, and click Submit to apply. You may also set the daylight saving time in this
page.
Synchronize with an NTP server
To synchronize with an NTP server, change Synchronize with NTP to Every Hour. The camera will
synchronize its system time with a time server every hour.
Note: This function requires Internet connection.
Chapter 4-2 Video/Audio
Chapter 4-2-1 Video General Setting [Path: Basic>> Video/Audio>> General]
To transmit video over a low bandwidth network such as the Internet, set the bit rate close to the
actual upload bandwidth. The camera will encode frames based on the bit rate setting.

17
Profile: 4 customizable profiles.
TV System: NTSC(60)/PAL(50) HZ video system.
Profile Name: Description of the streaming profile.
Output Frame Rate: The frame rate of the profile.
GOP(Group of Picture): I-Frame period per second.
VBR/CBR Mode: VRB：Variable bit rate encoding mode/constant bit rate encoding mode.
Bit Rate: Maximum bit rate available for network connection based on actual bandwidth
requirements.
Image Quality: MJPEG image quality.
Alarm Weighted Mode: Enable to prioritize as the output stream you want to see when an

18
alarm is detected.
RTSPURL: Allows you to see the video stream through the Real Time Streaming Protocol
Note: Setting options may differ depending on the model you use.
Chapter 4-2-2 Video Quality Tuner [Path: Basic>> Video/Audio>> Quality Tuner]
Chapter 4-2-2-1 Day Night Mode [Path: Basic>> Video/Audio>> Quality Tuner>> Day Night Mode]
IR Cut removable controls IR activation, and can be set to (1) auto, (2) day, (3) night.
Auto: Automatically switches between Day Mode (colored) or Night Mode (black and
white) based on sensor signals.
Day/Night Switch Level: Set the level of sensitivity for the Auto Mode.
Day Mode: IR cut feature is forced to be always on.
Night Mode: IR cut feature is removed.
4-2-2-2 Quality Tuner [Path: Basic>> Video/Audio>> Quality Tuner>> Quality Tuner]

19
Video setting options are described as followed:
Mirror: Flip the video horizontally.
Flip: Flip the video vertically.
WDR: Enables or disables Wide Dynamic Range to capture greater details. When turned on
(the system will be restarted), the camera will record up to 2MP @ 30 fps in H.264. The
default is off (the system will be restarted, H.264: up to 2MP @ 60 fps).
DNR: With the 3D noise reduction function, the processor analyzes pixel by pixel and frame
by frame to eliminate environmental noise signal so that the highest quality image can be
produced even in low light or slow speed shutter conditions. Options cover Off and 1–5,
with a default value of 3.
Sharpness: Intensifies the contour of subjects. The settings are 0–15, with a default of 8.
Brightness: This parameter adjusts the brightness of the image. The settings are 1–255, with
a default of 128.
White Balance Mode:
Our camera offers two white balance modes: AWB (Auto White Balance), which can
automatically control the white balance, and MWB (Manual White Balance), with which you
have to manually control the white balance. AWB also provides the ATW (Auto Trace White
Balance) mode and the Full Open mode. The MWB includes specific color temperature
settings and a user mode.
ATW Indoor: Auto Trace White Balance, Color temperature 2800–9500 K
ATW Outdoor: Auto Trace White Balance, Color temperature 2200–10500 K
Full Open: Auto Trace White Balance, Color temperature 1500–10500 K
Manual: Manual White Balance
Defog: When the surrounding area of the subject is foggy and shows low contrast, the defog
mode will make the subject appear clearer.
Electronic Image Stabilization: Switching ON to reduce image blur caused by, for example,
vibration. This function allows you to obtain images without much blurring. A vibration
frequency of around 10 Hz can be most effectively reduced. The Image Stabilizer function
employs the digital zoom system, so the angle of view and resolution are changed, but the
sensitivity is maintained.