Lilin PIH-2422 User manual

MERIT LILIN ENT. CO., LTD
http://www.meritlilin.com
INSTRUCTION MANUAL
MINI DOME CAMERA
PIH-2422/2442
66-2422CSE

IMPORTANT SAFEGUARDS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
GRAPHIC SYMBOL EXPLANATION
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated "dangerous voltage" within the product's enclosure
that may be of sufficient magnitude to constitute a risk of electric
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature
shock to persons.
accompanying the unit.

PART DESCRIPTION & DIMENSION
VIDEO OUTPUT JACK
DC12V POWER INPUT (DC12V 10%) JACK
BASE
INNER FIX RING
OUTER FIX RING
DOME
LENS
110
70
62.2
90 Unit: mm

INSTALLATION
FIG. 1
2. Embedded Mounting
A. Disassemble base & inner fix ring and keep the ring only.
Please refer to FIG.2.
B. Use the provided screws (M3.0x20, wooden screw-flat
head) to screw 3 points of "b" on the inner fix ring to mount
it on the desired position. Please refer to FIG.3.
3. Put in the dome and fix the outer fix ring to the inner fix ring
and twist it to the lock position. Please refer to FIG.4 & FIG.5.
NOTE: Make sure the " " mark next to the lens is on the
upside.
1. Attached Mounting
Use the provided screws (M3.0x25, wooden screw) to screw
3 points of "a" on the base to mount it on the desired position.
Please refer to FIG.1.
a
a
a

FIG. 3
FIG. 2
b
b
b

FIG. 5
Embedded Mounting
FIG. 4
Attached Mounting
""Mark
""Mark

COLOR MINIDOME CAMERA
Model No.
Power Input Voltage
System
Sync. Mode
Pick Up Element
Effective Pixels
Chip Size
Scanning System
Resolution
Minimum Illumination
S/N Ratio
Auto Gain Control
Aperture Correction
Power Consumption
Shutter
Back Light Compensation
Video Output
Gamma Characteristic
Lens
Operating Temperature
Weight
Dimension
DC12V ( 10%)
NTSC or PAL
Internal
1/3" Super HAD CCD Sensor
5.59mm (H) x 4.68mm (V)
2 1 Interlace
540TV Lines
0.5Lux (F1.8)
More Than 50dB (AGC OFF)
36dB Variable Gain
Horizontal , Vertical
2.2W
1/60(1/50)S ~ 1/100,000S(Auto)
Auto
CVBS 1.0Vp-p , 75ohm
=0.45
-10 ~ +50 (14 ~ 122 )
Dome: 62.2 , Base & Fix Ring: 110 x 45mm
768(H) x 494(V) [NTSC]
752(H) x 582(V) [PAL]
15.734KHz / 59.94Hz [NTSC]
15.625KHz / 50Hz [PAL]
Horizontal & Vertical
Sync. Frequency
Focal Length
Iris
Angle of view
3.6mm 6.0mm
F2.0 F1.8
PIH-2442 3.6 PIH-2442 6
Option lens 8.0mm lens.
Design and specifications are subject to change without notice.
White Balance ATW
300g
H
V
D
3.6mm 6.0mm
F2.0 F1.8
54.5 33.1
PIH-2422 3.6 PIH-2422 6
73 44.5
92 56
54.5 33.1
73 44.5
92 56
510(H) x 492(V) [NTSC]
500(H) x 582(V) [PAL]
380TV Lines
0.2Lux (F1.8)
SPECIFICATIONS
66-2422CSE-5

MERIT LILIN ENT. CO., LTD
http://www.meritlilin.com
INSTRUCTION MANUAL
MINI DOME CAMERA
PIH-2422/2442
66-2422CSE